[Mon Sep 26 16:22:29 2011] Detection parameters:
  Position = (607.7, 232.0) = 17 45 30.13 -28 58 12.9
  Extent = 1.4" x 0.6", rotation angle = 98 degrees
  Source counts = 33.4 +/- 7.1
  Background counts = 16.6
  Rate = 0.0004 +/- 8e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 3.08'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Mon Sep 26 16:27:00 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.021
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.60"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src27.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src27.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src27_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src27.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 69.042900, observed total counts = 68.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 29 = 0.967353 pixels
[Mon Sep 26 16:28:31 2011] 71.145400 total counts/ 41.954500 bgd. counts: snr = 4.506695
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.967353 pixels
  Position = (608.2, 231.1) = 17 45 30.13 -28 58 13.5
  Extent = 0.9 (0.5-1.4)", rotation angle = 0
  Source counts = 29.2 +/- 8.4
  Background counts = 42.0
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Mon Sep 26 16:29:41 2011] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.91"
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src27.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src27.csv
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src27_1.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src27.csv
[Mon Sep 26 16:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 64.994300, observed total counts = 65.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 29 = 0.168542 pixels
[Mon Sep 26 16:30:46 2011] 66.781500 total counts/ 34.835500 bgd. counts: snr = 5.412594
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.168542 pixels
  Position = (608.3, 231.2) = 17 45 30.12 -28 58 13.5
  Extent = 1.0 (0.6-1.5)", rotation angle = 0
  Source counts = 31.9 +/- 8.2
  Background counts = 34.8
  Rate = 0.0004 +/- 9e-05
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:58 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_src.reg
[Mon Sep 26 16:39:58 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (564, 187) - (653, 275)
[Mon Sep 26 16:39:58 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29.gif
[Mon Sep 26 16:41:59 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:59 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_src.evt.gz[events] = 57 counts
[Mon Sep 26 16:41:59 2011] Mean chipx,y = (391.84, 906.44)
[Mon Sep 26 16:41:59 2011] Mean tdetx,y = (3967.44, 3694.16)
[Mon Sep 26 16:41:59 2011] chipx,y range = (371.00-413.00, 885.00-924.00)
[Mon Sep 26 16:41:59 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 385 counts
[Mon Sep 26 16:41:59 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:59 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:59 2011] Not generating rmf since there are only 31 counts
[Mon Sep 26 16:42:02 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:55 2011] 195.648
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000355, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src29.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 5.6e-15
[Mon Sep 26 16:53:37 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting