[Mon Sep 26 16:22:29 2011] Detection parameters:
  Position = (532.0, 210.7) = 17 45 32.96 -28 58 23.4
  Extent = 0.5" x 0.5", rotation angle = 7 degrees
  Source counts = 30.7 +/- 6.6
  Background counts = 12.3
  Rate = 0.0003 +/- 7e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 2.52'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Sep 26 16:27:00 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.992
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.50"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src29.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src29.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src29.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 67.433800, observed total counts = 67.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 26 = 0.745973 pixels
[Mon Sep 26 16:28:31 2011] 66.179100 total counts/ 35.889700 bgd. counts: snr = 5.055985
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.745973 pixels
  Position = (532.6, 211.2) = 17 45 32.96 -28 58 23.4
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 30.3 +/- 8.1
  Background counts = 35.9
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Mon Sep 26 16:29:41 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.931
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 0.64"
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src29.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src29.csv
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src29_1.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src29.csv
[Mon Sep 26 16:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 67.999600, observed total counts = 68.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 26 = 0.102100 pixels
[Mon Sep 26 16:30:46 2011] 66.111300 total counts/ 36.150500 bgd. counts: snr = 4.983062
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.102100 pixels
  Position = (532.7, 211.2) = 17 45 32.96 -28 58 23.4
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 30.0 +/- 8.1
  Background counts = 36.2
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:58 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_src.reg
[Mon Sep 26 16:39:58 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (502, 181) - (563, 241)
[Mon Sep 26 16:39:58 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26.gif
[Mon Sep 26 16:42:05 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Mon Sep 26 16:42:05 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_src.evt.gz[events] = 41 counts
[Mon Sep 26 16:42:05 2011] Mean chipx,y = (310.22, 907.73)
[Mon Sep 26 16:42:05 2011] Mean tdetx,y = (3968.73, 3775.78)
[Mon Sep 26 16:42:05 2011] chipx,y range = (295.00-330.00, 886.00-927.00)
[Mon Sep 26 16:42:05 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 178 counts
[Mon Sep 26 16:42:05 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Mon Sep 26 16:42:05 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Mon Sep 26 16:42:05 2011] Not generating rmf since there are only 29 counts
[Mon Sep 26 16:42:09 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:55 2011] 199.764
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000333, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src26.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 5.1e-15
[Mon Sep 26 16:53:37 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting