[Mon Sep 26 16:22:28 2011] Detection parameters:
  Position = (488.5, 578.7) = 17 45 34.60 -28 55 22.3
  Extent = 0.7" x 0.6", rotation angle = 139 degrees
  Source counts = 46.1 +/- 7.7
  Background counts = 13.9
  Rate = 0.0005 +/- 9e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 5.05'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 1.20 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Mon Sep 26 16:27:00 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.867
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 1.20"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src18.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src18.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src18_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src18.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 78.659300, observed total counts = 79.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 22 = 1.813974 pixels
[Mon Sep 26 16:28:31 2011] 79.670030 total counts/ 6.699130 bgd. counts: snr = 28.192949
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.813974 pixels
  Position = (489.8, 577.4) = 17 45 34.57 -28 55 23.2
  Extent = 1.9 (1.0-2.4)", rotation angle = 0
  Source counts = 73.0 +/- 8.9
  Background counts = 6.7
  Rate = 0.0008 +/- 0.0001
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 1.90"
[Mon Sep 26 16:29:41 2011] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.063
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.90"
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src18.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src18.csv
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src18.csv
[Mon Sep 26 16:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 108.870000, observed total counts = 109.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 22 = 0.274118 pixels
[Mon Sep 26 16:30:46 2011] 108.758100 total counts/ 46.910000 bgd. counts: snr = 9.030123
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.274118 pixels
  Position = (489.7, 577.7) = 17 45 34.57 -28 55 23.1
  Extent = 1.6 (1.2-2.1)", rotation angle = 0
  Source counts = 61.8 +/- 10.4
  Background counts = 46.9
  Rate = 0.0007 +/- 0.0001
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:57 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_src.reg
[Mon Sep 26 16:39:57 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (417, 505) - (563, 650)
[Mon Sep 26 16:39:57 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22.gif
[Mon Sep 26 16:41:27 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:27 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_src.evt.gz[events] = 103 counts
[Mon Sep 26 16:41:27 2011] Mean chipx,y = (363.74, 539.50)
[Mon Sep 26 16:41:27 2011] Mean tdetx,y = (3600.50, 3722.26)
[Mon Sep 26 16:41:27 2011] chipx,y range = (340.00-389.00, 515.00-565.00)
[Mon Sep 26 16:41:27 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 456 counts
[Mon Sep 26 16:41:27 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:27 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:27 2011] Not generating rmf since there are only 61 counts
[Mon Sep 26 16:41:30 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:54 2011] 189.849
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000688, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src22.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 1.1e-14
[Mon Sep 26 16:53:37 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting