[Mon Sep 26 16:22:28 2011] Detection parameters:
  Position = (1045.5, 423.4) = 17 45 13.72 -28 56 38.6
  Extent = 1.0" x 0.9", rotation angle = 100 degrees
  Source counts = 39.6 +/- 7.9
  Background counts = 22.4
  Rate = 0.0004 +/- 9e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 6.92'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 2.13 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 2.13"
[Mon Sep 26 16:27:00 2011] source mask rpix=4.3, npix_max = 93, mask sum = 81, frac = 0.865
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 2.13"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src23.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src23.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src23_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src23.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 86.997700, observed total counts = 87.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 20 = 0.912027 pixels
[Mon Sep 26 16:28:31 2011] 85.598200 total counts/ 56.623200 bgd. counts: snr = 3.850581
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.912027 pixels
  Position = (1046.4, 423.7) = 17 45 13.71 -28 56 38.6
  Extent = 1.0 (0.7-1.6)", rotation angle = 0
  Source counts = 29.0 +/- 9.3
  Background counts = 56.6
  Rate = 0.0003 +/- 0.0001
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Mon Sep 26 16:29:41 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 1.00"
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src23.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src23.csv
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src23_1.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src23.csv
[Mon Sep 26 16:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 51.924700, observed total counts = 52.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 20 = 0.429894 pixels
[Mon Sep 26 16:30:46 2011] 52.374500 total counts/ 26.282100 bgd. counts: snr = 5.089604
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.429894 pixels
  Position = (1046.5, 423.3) = 17 45 13.70 -28 56 38.8
  Extent = 0.9 (0.7-1.5)", rotation angle = 0
  Source counts = 26.1 +/- 7.2
  Background counts = 26.3
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:58 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_src.reg
[Mon Sep 26 16:39:58 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (1005, 382) - (1088, 464)
[Mon Sep 26 16:39:58 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20.gif
[Mon Sep 26 16:41:45 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:45 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_src.evt.gz[events] = 45 counts
[Mon Sep 26 16:41:45 2011] Mean chipx,y = (863.38, 830.71)
[Mon Sep 26 16:41:45 2011] Mean tdetx,y = (3891.71, 3222.62)
[Mon Sep 26 16:41:45 2011] chipx,y range = (842.00-883.00, 807.00-849.00)
[Mon Sep 26 16:41:46 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 124 counts
[Mon Sep 26 16:41:46 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:46 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:46 2011] Not generating rmf since there are only 26 counts
[Mon Sep 26 16:41:48 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:54 2011] 175.142
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.00029, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src20.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 5e-15
[Mon Sep 26 16:53:37 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting