[Mon Sep 26 16:22:28 2011] Detection parameters:
  Position = (459.9, 751.4) = 17 45 35.67 -28 53 57.4
  Extent = 1.7" x 0.9", rotation angle = 125 degrees
  Source counts = 42.2 +/- 7.9
  Background counts = 20.8
  Rate = 0.0005 +/- 9e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 6.38'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 1.83"
[Mon Sep 26 16:27:00 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.013
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.83"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src20.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src20.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src20_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src20.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 72.997300, observed total counts = 73.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 19 = 0.819505 pixels
[Mon Sep 26 16:28:31 2011] 73.291400 total counts/ 33.223200 bgd. counts: snr = 6.951509
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.819505 pixels
  Position = (460.6, 751.7) = 17 45 35.66 -28 53 57.4
  Extent = 1.1 (0.7-1.5)", rotation angle = 0
  Source counts = 40.1 +/- 8.6
  Background counts = 33.2
  Rate = 0.0004 +/- 0.0001
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Mon Sep 26 16:29:41 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.857
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 1.08"
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src20.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src20.csv
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src20_1.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src20.csv
[Mon Sep 26 16:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 56.995000, observed total counts = 57.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 19 = 0.459406 pixels
[Mon Sep 26 16:30:46 2011] 57.642400 total counts/ 21.737800 bgd. counts: snr = 7.700914
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.459406 pixels
  Position = (460.7, 751.3) = 17 45 35.66 -28 53 57.7
  Extent = 1.0 (0.6-1.5)", rotation angle = 0
  Source counts = 35.9 +/- 7.6
  Background counts = 21.7
  Rate = 0.0004 +/- 8e-05
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:57 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_src.reg
[Mon Sep 26 16:39:57 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (417, 708) - (504, 795)
[Mon Sep 26 16:39:57 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19.gif
[Mon Sep 26 16:41:33 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:33 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_src.evt.gz[events] = 54 counts
[Mon Sep 26 16:41:33 2011] Mean chipx,y = (377.80, 364.89)
[Mon Sep 26 16:41:33 2011] Mean tdetx,y = (3425.89, 3708.20)
[Mon Sep 26 16:41:33 2011] chipx,y range = (361.00-396.00, 343.00-386.00)
[Mon Sep 26 16:41:33 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 158 counts
[Mon Sep 26 16:41:33 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:33 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:33 2011] Not generating rmf since there are only 35 counts
[Mon Sep 26 16:41:36 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:54 2011] 183.643
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000399, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src19.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 6.6e-15
[Mon Sep 26 16:53:37 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting