[Mon Sep 26 16:22:28 2011] Detection parameters:
  Position = (254.9, 490.5) = 17 45 43.35 -28 56 5.7
  Extent = 1.0" x 0.7", rotation angle = 178 degrees
  Source counts = 46.4 +/- 7.7
  Background counts = 13.6
  Rate = 0.0005 +/- 9e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 4.18'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Mon Sep 26 16:27:00 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.89"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src17.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src17.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src17_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src17.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 67.998000, observed total counts = 68.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 18 = 1.534081 pixels
[Mon Sep 26 16:28:31 2011] 67.746600 total counts/ 24.592300 bgd. counts: snr = 8.702109
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.534081 pixels
  Position = (256.4, 490.8) = 17 45 43.31 -28 56 5.8
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 43.2 +/- 8.2
  Background counts = 24.6
  Rate = 0.0005 +/- 9e-05
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Mon Sep 26 16:29:41 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.099
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.80"
[Mon Sep 26 16:29:47 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src17.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src17.csv
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src17_1.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src17.csv
[Mon Sep 26 16:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 65.031200, observed total counts = 65.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 18 = 0.038967 pixels
[Mon Sep 26 16:30:46 2011] 64.712700 total counts/ 20.024900 bgd. counts: snr = 9.986281
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.038967 pixels
  Position = (256.4, 490.8) = 17 45 43.32 -28 56 5.8
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 44.7 +/- 8.0
  Background counts = 20.0
  Rate = 0.0005 +/- 9e-05
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:57 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_src.reg
[Mon Sep 26 16:39:57 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (218, 453) - (294, 529)
[Mon Sep 26 16:39:57 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18.gif
[Mon Sep 26 16:41:22 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:22 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_src.evt.gz[events] = 57 counts
[Mon Sep 26 16:41:22 2011] Mean chipx,y = (112.26, 564.23)
[Mon Sep 26 16:41:22 2011] Mean tdetx,y = (3625.23, 3973.74)
[Mon Sep 26 16:41:22 2011] chipx,y range = (91.00-131.00, 546.00-583.00)
[Mon Sep 26 16:41:22 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 161 counts
[Mon Sep 26 16:41:22 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:22 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:22 2011] Not generating rmf since there are only 44 counts
[Mon Sep 26 16:41:27 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:54 2011] 185.51
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000497, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src18.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 8.2e-15
[Mon Sep 26 16:53:37 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting