[Mon Sep 26 16:22:28 2011] Detection parameters:
  Position = (252.8, 135.4) = 17 45 43.43 -28 59 0.4
  Extent = 0.8" x 0.6", rotation angle = 128 degrees
  Source counts = 40.5 +/- 7.8
  Background counts = 20.5
  Rate = 0.0005 +/- 9e-05

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 1.36'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Sep 26 16:27:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.907
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.39"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src22.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src22_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Mon Sep 26 16:27:09 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Sep 26 16:27:09 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 101.423000, observed total counts = 111.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 16 = 0.204558 pixels
[Mon Sep 26 16:28:31 2011] 103.111300 total counts/ 59.829900 bgd. counts: snr = 5.595542
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.204558 pixels
  Position = (253.0, 135.5) = 17 45 43.44 -28 59 0.6
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 43.3 +/- 10.2
  Background counts = 59.8
  Rate = 0.0005 +/- 0.0001
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Mon Sep 26 16:29:41 2011] source mask rpix=1.0, npix_max = 9, mask sum = 11, frac = 1.145
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 0.52"
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src22.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src22.csv
[Mon Sep 26 16:29:48 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src22_1.ximg exists
[Mon Sep 26 16:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src22.csv
[Mon Sep 26 16:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 101.387000, observed total counts = 111.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 16 = 0.003534 pixels
[Mon Sep 26 16:30:46 2011] 103.076700 total counts/ 59.843000 bgd. counts: snr = 5.588763
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.003534 pixels
  Position = (253.0, 135.5) = 17 45 43.44 -28 59 0.6
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 43.2 +/- 10.2
  Background counts = 59.8
  Rate = 0.0005 +/- 0.0001
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:58 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_src.reg
[Mon Sep 26 16:39:58 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (229, 112) - (277, 159)
[Mon Sep 26 16:39:58 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16.gif
[Mon Sep 26 16:41:40 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:40 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_src.evt.gz[events] = 68 counts
[Mon Sep 26 16:41:40 2011] Mean chipx,y = (22.43, 908.25)
[Mon Sep 26 16:41:40 2011] Mean tdetx,y = (3969.25, 4063.57)
[Mon Sep 26 16:41:40 2011] chipx,y range = (4.00-43.00, 891.00-929.00)
[Mon Sep 26 16:41:40 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 145 counts
[Mon Sep 26 16:41:40 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:40 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:40 2011] Not generating rmf since there are only 43 counts
[Mon Sep 26 16:41:45 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:54 2011] 200.248
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000481, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src16.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 7.4e-15
[Mon Sep 26 16:53:37 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting