[Mon Sep 26 16:22:28 2011] Detection parameters:
  Position = (251.5, 174.4) = 17 45 43.48 -28 58 41.2
  Extent = 0.7" x 0.5", rotation angle = 67 degrees
  Source counts = 64.7 +/- 9.2
  Background counts = 20.3
  Rate = 0.0007 +/- 0.0001

[Mon Sep 26 16:22:38 2011] Off-axis axis estimate = 1.66'
[Mon Sep 26 16:27:00 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:27:00 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Sep 26 16:27:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.297
[Mon Sep 26 16:27:00 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.40"
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src13.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 16:27:06 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Sep 26 16:27:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 16:27:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:27:08 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Sep 26 16:27:08 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Sep 26 16:27:08 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Sep 26 16:28:31 2011] Spatial fit model total counts = 135.061000, observed total counts = 133.000000
[Mon Sep 26 16:28:31 2011] Offset between fit and detection position for source 14 = 0.874885 pixels
[Mon Sep 26 16:28:31 2011] 133.047300 total counts/ 72.342000 bgd. counts: snr = 7.137257
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.874885 pixels
  Position = (252.1, 175.1) = 17 45 43.48 -28 58 41.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 60.7 +/- 11.5
  Background counts = 72.3
  Rate = 0.0007 +/- 0.0001
[Mon Sep 26 16:28:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:31 2011] Source does appear to be extended
[Mon Sep 26 16:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:41 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Sep 26 16:29:41 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.065
[Mon Sep 26 16:29:41 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.47"
[Mon Sep 26 16:29:47 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src13.ximg exists
[Mon Sep 26 16:29:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 16:29:47 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Sep 26 16:29:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 16:29:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03665_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Sep 26 16:29:51 2011] fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Sep 26 16:29:51 2011] Fit fullrun_ccd2_acisf03665_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Sep 26 16:30:46 2011] Spatial fit model total counts = 131.603000, observed total counts = 128.000000
[Mon Sep 26 16:30:46 2011] Offset between fit and detection position for source 14 = 0.006969 pixels
[Mon Sep 26 16:30:46 2011] 128.479700 total counts/ 67.710100 bgd. counts: snr = 7.385156
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.006969 pixels
  Position = (252.1, 175.1) = 17 45 43.48 -28 58 41.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 60.8 +/- 11.3
  Background counts = 67.7
  Rate = 0.0007 +/- 0.0001
[Mon Sep 26 16:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:46 2011] Source does appear to be extended
[Mon Sep 26 16:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:57 2011] Not overwriting source region fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_src.reg
[Mon Sep 26 16:39:57 2011] Extracting stamp from image fullrun_ccd2_acisf03665_pi14-548_cl_sm2.00.img.gz, (231, 154) - (274, 197)
[Mon Sep 26 16:39:57 2011] Writing fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14.gif
[Mon Sep 26 16:41:06 2011] ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_src.evt and ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:06 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_src.evt.gz[events] = 75 counts
[Mon Sep 26 16:41:06 2011] Mean chipx,y = (29.53, 871.27)
[Mon Sep 26 16:41:06 2011] Mean tdetx,y = (3932.27, 4056.47)
[Mon Sep 26 16:41:06 2011] chipx,y range = (11.00-49.00, 851.00-891.00)
[Mon Sep 26 16:41:06 2011] Size of ../../acisf03665/products/events/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 141 counts
[Mon Sep 26 16:41:06 2011] ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_src.img and ../../acisf03665/products/images/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:06 2011] ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_src.pi and ../../acisf03665/products/spectra/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:06 2011] Not generating rmf since there are only 60 counts
[Mon Sep 26 16:41:12 2011] ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Mon Sep 26 16:45:54 2011] 199.742
[Mon Sep 26 16:51:51 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:51 2011] Error reading totcts from fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14_src.pi.gz
[Mon Sep 26 16:51:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:52 2011] Using photon index=1.80, rate=0.000676, arf fullrun_ccd2_acisf03665_pi14-548_pass1_cl_src14.arf
[Mon Sep 26 16:51:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:52 2011] Updating source flux to 1e-14
[Mon Sep 26 16:53:37 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting