[Mon Sep 26 16:22:15 2011] Detection parameters:
  Position = (744.7, 699.5) = 17 45 53.31 -29 4 43.7
  Extent = 1.1" x 0.6", rotation angle = 48 degrees
  Source counts = 47.7 +/- 7.6
  Background counts = 10.3
  Rate = 0.0005 +/- 8e-05

[Mon Sep 26 16:22:26 2011] Off-axis axis estimate = 5.26'
[Mon Sep 26 16:26:55 2011] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:26:55 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Mon Sep 26 16:26:55 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.081
[Mon Sep 26 16:26:55 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.29"
[Mon Sep 26 16:26:56 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src13.ximg exists
[Mon Sep 26 16:26:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 16:26:56 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Sep 26 16:26:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src13.csv
[Mon Sep 26 16:26:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:26:58 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Sep 26 16:26:58 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Sep 26 16:26:58 2011] Fit fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Sep 26 16:28:14 2011] Spatial fit model total counts = 65.692700, observed total counts = 66.000000
[Mon Sep 26 16:28:14 2011] Offset between fit and detection position for source 3 = 0.191405 pixels
[Mon Sep 26 16:28:14 2011] 67.734600 total counts/ 24.648000 bgd. counts: snr = 8.678634
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.191405 pixels
  Position = (744.6, 699.4) = 17 45 53.33 -29 4 44.1
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 43.1 +/- 8.2
  Background counts = 24.6
  Rate = 0.0005 +/- 9e-05
[Mon Sep 26 16:28:14 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:14 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:14 2011] Source does appear to be extended
[Mon Sep 26 16:28:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:29 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Mon Sep 26 16:29:29 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.189
[Mon Sep 26 16:29:29 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.88"
[Mon Sep 26 16:29:31 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src13.ximg exists
[Mon Sep 26 16:29:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 16:29:31 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Sep 26 16:29:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src13.csv
[Mon Sep 26 16:29:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:32 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Sep 26 16:29:32 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Sep 26 16:29:32 2011] Fit fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Sep 26 16:30:32 2011] Spatial fit model total counts = 65.721300, observed total counts = 66.000000
[Mon Sep 26 16:30:32 2011] Offset between fit and detection position for source 3 = 0.013415 pixels
[Mon Sep 26 16:30:32 2011] 67.772400 total counts/ 24.615400 bgd. counts: snr = 8.698569
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.013415 pixels
  Position = (744.6, 699.3) = 17 45 53.33 -29 4 44.1
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 43.2 +/- 8.2
  Background counts = 24.6
  Rate = 0.0005 +/- 9e-05
[Mon Sep 26 16:30:33 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:33 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:33 2011] Source does appear to be extended
[Mon Sep 26 16:30:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:35:38 2011] Not overwriting source region fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_src.reg
[Mon Sep 26 16:35:38 2011] Extracting stamp from image fullrun_ccd1_acisf03665_pi14-548_cl_sm2.00.img.gz, (704, 659) - (785, 740)
[Mon Sep 26 16:35:38 2011] Writing fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3.gif
[Mon Sep 26 16:36:29 2011] ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_src.evt and ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Sep 26 16:36:29 2011] Size of ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_src.evt.gz[events] = 57 counts
[Mon Sep 26 16:36:29 2011] Mean chipx,y = (389.44, 550.30)
[Mon Sep 26 16:36:29 2011] Mean tdetx,y = (4581.70, 4496.44)
[Mon Sep 26 16:36:29 2011] chipx,y range = (367.00-407.00, 533.00-568.00)
[Mon Sep 26 16:36:30 2011] Size of ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 164 counts
[Mon Sep 26 16:36:30 2011] ../../acisf03665/products/images/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_src.img and ../../acisf03665/products/images/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Sep 26 16:36:30 2011] ../../acisf03665/products/spectra/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_src.pi and ../../acisf03665/products/spectra/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Sep 26 16:36:30 2011] Not generating rmf since there are only 43 counts
[Mon Sep 26 16:36:33 2011] ../../acisf03665/products/lightcurves/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Sep 26 16:39:53 2011] 189.272
[Mon Sep 26 16:51:49 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:49 2011] Error reading totcts from fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Sep 26 16:51:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:50 2011] Using photon index=1.80, rate=0.00048, arf fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src3.arf
[Mon Sep 26 16:51:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:50 2011] Updating source flux to 7.7e-15
[Mon Sep 26 16:53:04 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting