[Mon Sep 26 16:22:20 2011] Detection parameters:
  Position = (854.7, 1077.1) = 17 45 49.18 -29 1 38.0
  Extent = 0.7" x 0.5", rotation angle = 32 degrees
  Source counts = 22.5 +/- 5.6
  Background counts = 8.5
  Rate = 0.0003 +/- 6e-05

[Mon Sep 26 16:22:26 2011] Off-axis axis estimate = 2.31'
[Mon Sep 26 16:26:55 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:26:55 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Sep 26 16:26:55 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.076
[Mon Sep 26 16:26:55 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 0.47"
[Mon Sep 26 16:26:56 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src35.ximg exists
[Mon Sep 26 16:26:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src35.csv
[Mon Sep 26 16:26:56 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src35_1.ximg exists
[Mon Sep 26 16:26:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src35.csv
[Mon Sep 26 16:26:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:26:58 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Mon Sep 26 16:26:58 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Sep 26 16:26:58 2011] Fit fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Mon Sep 26 16:28:14 2011] Spatial fit model total counts = 48.677900, observed total counts = 48.000000
[Mon Sep 26 16:28:14 2011] Offset between fit and detection position for source 25 = 0.847804 pixels
[Mon Sep 26 16:28:14 2011] 47.687600 total counts/ 21.376300 bgd. counts: snr = 5.690836
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.847804 pixels
  Position = (855.3, 1077.7) = 17 45 49.17 -29 1 37.9
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 26.3 +/- 6.9
  Background counts = 21.4
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 16:28:14 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:14 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:14 2011] Source does appear to be extended
[Mon Sep 26 16:28:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:29 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Sep 26 16:29:29 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.108
[Mon Sep 26 16:29:29 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.69"
[Mon Sep 26 16:29:31 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src35.ximg exists
[Mon Sep 26 16:29:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src35.csv
[Mon Sep 26 16:29:31 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src35_1.ximg exists
[Mon Sep 26 16:29:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src35.csv
[Mon Sep 26 16:29:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:34 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Mon Sep 26 16:29:35 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Sep 26 16:29:35 2011] Fit fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Mon Sep 26 16:30:32 2011] Spatial fit model total counts = 49.830900, observed total counts = 49.000000
[Mon Sep 26 16:30:32 2011] Offset between fit and detection position for source 25 = 0.056234 pixels
[Mon Sep 26 16:30:32 2011] 48.142200 total counts/ 22.289600 bgd. counts: snr = 5.475869
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.056234 pixels
  Position = (855.3, 1077.8) = 17 45 49.17 -29 1 37.9
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 25.9 +/- 6.9
  Background counts = 22.3
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 16:30:33 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:33 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:33 2011] Source does appear to be extended
[Mon Sep 26 16:30:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:35:39 2011] Not overwriting source region fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_src.reg
[Mon Sep 26 16:35:39 2011] Extracting stamp from image fullrun_ccd1_acisf03665_pi14-548_cl_sm2.00.img.gz, (824, 1047) - (886, 1109)
[Mon Sep 26 16:35:39 2011] Writing fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25.gif
[Mon Sep 26 16:37:46 2011] ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_src.evt and ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Mon Sep 26 16:37:46 2011] Size of ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_src.evt.gz[events] = 34 counts
[Mon Sep 26 16:37:46 2011] Mean chipx,y = (182.09, 892.82)
[Mon Sep 26 16:37:46 2011] Mean tdetx,y = (4239.18, 4289.09)
[Mon Sep 26 16:37:46 2011] chipx,y range = (167.00-202.00, 872.00-907.00)
[Mon Sep 26 16:37:46 2011] Size of ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 145 counts
[Mon Sep 26 16:37:46 2011] ../../acisf03665/products/images/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_src.img and ../../acisf03665/products/images/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Mon Sep 26 16:37:46 2011] ../../acisf03665/products/spectra/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_src.pi and ../../acisf03665/products/spectra/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Mon Sep 26 16:37:46 2011] Not generating rmf since there are only 25 counts
[Mon Sep 26 16:37:51 2011] ../../acisf03665/products/lightcurves/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Mon Sep 26 16:39:53 2011] 204.063
[Mon Sep 26 16:51:49 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:49 2011] Error reading totcts from fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25_src.pi.gz
[Mon Sep 26 16:51:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:50 2011] Using photon index=1.80, rate=0.000288, arf fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src25.arf
[Mon Sep 26 16:51:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:50 2011] Updating source flux to 4.4e-15
[Mon Sep 26 16:53:04 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting