[Mon Sep 26 16:22:18 2011] Detection parameters:
  Position = (779.7, 861.5) = 17 45 51.99 -29 3 24.1
  Extent = 1.4" x 0.7", rotation angle = 7 degrees
  Source counts = 45.0 +/- 7.9
  Background counts = 18.0
  Rate = 0.0005 +/- 9e-05

[Mon Sep 26 16:22:26 2011] Off-axis axis estimate = 4.00'
[Mon Sep 26 16:26:55 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:26:55 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Mon Sep 26 16:26:55 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.305
[Mon Sep 26 16:26:55 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.83"
[Mon Sep 26 16:26:56 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src15.ximg exists
[Mon Sep 26 16:26:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src15.csv
[Mon Sep 26 16:26:56 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Sep 26 16:26:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src15.csv
[Mon Sep 26 16:26:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03665_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:26:58 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Sep 26 16:26:58 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Sep 26 16:26:58 2011] Fit fullrun_ccd1_acisf03665_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Sep 26 16:28:14 2011] Spatial fit model total counts = 79.048400, observed total counts = 78.000000
[Mon Sep 26 16:28:14 2011] Offset between fit and detection position for source 10 = 1.473578 pixels
[Mon Sep 26 16:28:14 2011] 81.191700 total counts/ 46.337200 bgd. counts: snr = 5.120283
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.473578 pixels
  Position = (781.0, 862.1) = 17 45 51.96 -29 3 24.0
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 34.9 +/- 9.0
  Background counts = 46.3
  Rate = 0.0004 +/- 0.0001
[Mon Sep 26 16:28:14 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:14 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:14 2011] Source does appear to be extended
[Mon Sep 26 16:28:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:29 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Mon Sep 26 16:29:29 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Mon Sep 26 16:29:29 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.74"
[Mon Sep 26 16:29:31 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src15.ximg exists
[Mon Sep 26 16:29:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src15.csv
[Mon Sep 26 16:29:31 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Sep 26 16:29:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src15.csv
[Mon Sep 26 16:29:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03665_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:32 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Sep 26 16:29:32 2011] fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Sep 26 16:29:32 2011] Fit fullrun_ccd1_acisf03665_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Sep 26 16:30:32 2011] Spatial fit model total counts = 76.408700, observed total counts = 80.000000
[Mon Sep 26 16:30:32 2011] Offset between fit and detection position for source 10 = 0.880238 pixels
[Mon Sep 26 16:30:32 2011] 75.407530 total counts/ 8.309330 bgd. counts: snr = 23.277046
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.880238 pixels
  Position = (781.7, 862.7) = 17 45 51.94 -29 3 23.7
  Extent = 1.4 (1.4-1.5)", rotation angle = 0
  Source counts = 67.1 +/- 8.7
  Background counts = 8.3
  Rate = 0.0007 +/- 0.0001
[Mon Sep 26 16:30:33 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:33 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:33 2011] Source does appear to be extended
[Mon Sep 26 16:30:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:35:38 2011] Not overwriting source region fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_src.reg
[Mon Sep 26 16:35:38 2011] Extracting stamp from image fullrun_ccd1_acisf03665_pi14-548_cl_sm2.00.img.gz, (716, 797) - (847, 928)
[Mon Sep 26 16:35:38 2011] Writing fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10.gif
[Mon Sep 26 16:36:36 2011] ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_src.evt and ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Sep 26 16:36:36 2011] Size of ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_src.evt.gz[events] = 103 counts
[Mon Sep 26 16:36:36 2011] Mean chipx,y = (308.95, 699.77)
[Mon Sep 26 16:36:36 2011] Mean tdetx,y = (4432.23, 4415.95)
[Mon Sep 26 16:36:36 2011] chipx,y range = (283.00-334.00, 676.00-725.00)
[Mon Sep 26 16:36:36 2011] Size of ../../acisf03665/products/events/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 703 counts
[Mon Sep 26 16:36:36 2011] ../../acisf03665/products/images/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_src.img and ../../acisf03665/products/images/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Sep 26 16:36:36 2011] ../../acisf03665/products/spectra/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_src.pi and ../../acisf03665/products/spectra/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Sep 26 16:36:36 2011] Not generating rmf since there are only 67 counts
[Mon Sep 26 16:36:40 2011] ../../acisf03665/products/lightcurves/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Sep 26 16:39:53 2011] 195.712
[Mon Sep 26 16:51:49 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:49 2011] Error reading totcts from fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Sep 26 16:51:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:50 2011] Using photon index=1.80, rate=0.000746, arf fullrun_ccd1_acisf03665_pi14-548_pass1_cl_src10.arf
[Mon Sep 26 16:51:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:50 2011] Updating source flux to 1.2e-14
[Mon Sep 26 16:53:04 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting