[Mon Sep 26 16:22:10 2011] Detection parameters:
  Position = (973.7, 690.7) = 17 45 54.31 -28 56 35.6
  Extent = 1.0" x 0.5", rotation angle = 69 degrees
  Source counts = 16.0 +/- 5.1
  Background counts = 10.0
  Rate = 0.0002 +/- 6e-05

[Mon Sep 26 16:22:15 2011] Off-axis axis estimate = 4.70'
[Mon Sep 26 16:26:48 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:26:48 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Mon Sep 26 16:26:48 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.882
[Mon Sep 26 16:26:48 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 1.06"
[Mon Sep 26 16:26:50 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src39.ximg exists
[Mon Sep 26 16:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src39.csv
[Mon Sep 26 16:26:50 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src39_1.ximg exists
[Mon Sep 26 16:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src39.csv
[Mon Sep 26 16:26:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:26:54 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Mon Sep 26 16:26:54 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Sep 26 16:26:54 2011] Fit fullrun_ccd0_acisf03665_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Sep 26 16:28:03 2011] Spatial fit model total counts = 61.966800, observed total counts = 62.000000
[Mon Sep 26 16:28:03 2011] Offset between fit and detection position for source 39 = 1.690866 pixels
[Mon Sep 26 16:28:03 2011] 59.006500 total counts/ 37.400500 bgd. counts: snr = 3.532935
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.690866 pixels
  Position = (973.4, 692.3) = 17 45 54.33 -28 56 35.0
  Extent = 0.9 (0.4-1.5)", rotation angle = 0
  Source counts = 21.6 +/- 7.7
  Background counts = 37.4
  Rate = 0.0002 +/- 9e-05
[Mon Sep 26 16:28:03 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:03 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:03 2011] Source does appear to be extended
[Mon Sep 26 16:28:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:26 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Mon Sep 26 16:29:26 2011] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.135
[Mon Sep 26 16:29:26 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.91"
[Mon Sep 26 16:29:27 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src37.ximg exists
[Mon Sep 26 16:29:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src37.csv
[Mon Sep 26 16:29:27 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src37_1.ximg exists
[Mon Sep 26 16:29:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src37.csv
[Mon Sep 26 16:29:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:29 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Mon Sep 26 16:29:29 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Sep 26 16:29:29 2011] Fit fullrun_ccd0_acisf03665_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Sep 26 16:30:22 2011] Spatial fit model total counts = 62.999000, observed total counts = 63.000000
[Mon Sep 26 16:30:22 2011] Offset between fit and detection position for source 39 = 0.157079 pixels
[Mon Sep 26 16:30:22 2011] 61.005300 total counts/ 39.191400 bgd. counts: snr = 3.484480
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.157079 pixels
  Position = (973.2, 692.3) = 17 45 54.34 -28 56 35.0
  Extent = 0.9 (0.4-1.4)", rotation angle = 0
  Source counts = 21.8 +/- 7.8
  Background counts = 39.2
  Rate = 0.0002 +/- 9e-05
[Mon Sep 26 16:30:22 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:22 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:22 2011] Source does appear to be extended
[Mon Sep 26 16:30:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:31:43 2011] Not overwriting source region fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_src.reg
[Mon Sep 26 16:31:43 2011] Extracting stamp from image fullrun_ccd0_acisf03665_pi14-548_cl_sm2.00.img.gz, (932, 651) - (1015, 734)
[Mon Sep 26 16:31:43 2011] Writing fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39.gif
[Mon Sep 26 16:34:19 2011] ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_src.evt and ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_bgd.evt exist, delete to re-create
[Mon Sep 26 16:34:19 2011] Size of ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_src.evt.gz[events] = 46 counts
[Mon Sep 26 16:34:19 2011] Mean chipx,y = (861.39, 547.11)
[Mon Sep 26 16:34:19 2011] Mean tdetx,y = (3608.11, 4270.61)
[Mon Sep 26 16:34:19 2011] chipx,y range = (838.00-880.00, 532.00-569.00)
[Mon Sep 26 16:34:19 2011] Size of ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 239 counts
[Mon Sep 26 16:34:19 2011] ../../acisf03665/products/images/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_src.img and ../../acisf03665/products/images/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_bgd.img exist, delete to re-create
[Mon Sep 26 16:34:19 2011] ../../acisf03665/products/spectra/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_src.pi and ../../acisf03665/products/spectra/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_bgd.pi exist, delete to re-create
[Mon Sep 26 16:34:19 2011] Not generating rmf since there are only 21 counts
[Mon Sep 26 16:34:23 2011] ../../acisf03665/products/lightcurves/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_bgd.lc exist, delete to re-create
[Mon Sep 26 16:35:36 2011] 193.902
[Mon Sep 26 16:51:48 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:48 2011] Error reading totcts from fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39_src.pi.gz
[Mon Sep 26 16:51:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:48 2011] Using photon index=1.80, rate=0.000243, arf fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src39.arf
[Mon Sep 26 16:51:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:48 2011] Updating source flux to 3.8e-15
[Mon Sep 26 16:52:06 2011] Source 39 has fewer than 100.000000 counts, skipping spectral fitting