[Mon Sep 26 16:22:10 2011] Detection parameters:
  Position = (874.9, 557.7) = 17 45 58.01 -28 57 41.0
  Extent = 0.9" x 0.9", rotation angle = 130 degrees
  Source counts = 23.0 +/- 6.0
  Background counts = 13.0
  Rate = 0.0003 +/- 7e-05

[Mon Sep 26 16:22:15 2011] Off-axis axis estimate = 4.56'
[Mon Sep 26 16:26:48 2011] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:26:48 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Mon Sep 26 16:26:48 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Mon Sep 26 16:26:48 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 1.01"
[Mon Sep 26 16:26:50 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src32.ximg exists
[Mon Sep 26 16:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src32.csv
[Mon Sep 26 16:26:50 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src32_1.ximg exists
[Mon Sep 26 16:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src32.csv
[Mon Sep 26 16:26:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03665_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:26:54 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Mon Sep 26 16:26:54 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Mon Sep 26 16:26:54 2011] Fit fullrun_ccd0_acisf03665_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Mon Sep 26 16:28:03 2011] Spatial fit model total counts = 56.999700, observed total counts = 57.000000
[Mon Sep 26 16:28:03 2011] Offset between fit and detection position for source 32 = 1.181243 pixels
[Mon Sep 26 16:28:03 2011] 55.998400 total counts/ 24.879000 bgd. counts: snr = 6.238997
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 1.181243 pixels
  Position = (876.0, 558.1) = 17 45 57.99 -28 57 41.0
  Extent = 1.3 (0.9-1.9)", rotation angle = 0
  Source counts = 31.1 +/- 7.5
  Background counts = 24.9
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 16:28:03 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:28:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:28:03 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:28:03 2011] Source does appear to be extended
[Mon Sep 26 16:28:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:29:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:29:26 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Mon Sep 26 16:29:26 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Mon Sep 26 16:29:26 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 1.30"
[Mon Sep 26 16:29:27 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src30.ximg exists
[Mon Sep 26 16:29:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src30.csv
[Mon Sep 26 16:29:27 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src30_1.ximg exists
[Mon Sep 26 16:29:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src30.csv
[Mon Sep 26 16:29:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03665_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:29:29 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Mon Sep 26 16:29:29 2011] fullrun_ccd0_acisf03665_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Sep 26 16:29:29 2011] Fit fullrun_ccd0_acisf03665_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Mon Sep 26 16:30:22 2011] Spatial fit model total counts = 58.999600, observed total counts = 59.000000
[Mon Sep 26 16:30:22 2011] Offset between fit and detection position for source 32 = 0.216433 pixels
[Mon Sep 26 16:30:22 2011] 58.641900 total counts/ 30.895500 bgd. counts: snr = 4.991821
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.216433 pixels
  Position = (876.1, 557.9) = 17 45 57.99 -28 57 41.1
  Extent = 1.2 (0.8-1.9)", rotation angle = 0
  Source counts = 27.7 +/- 7.7
  Background counts = 30.9
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 16:30:22 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:30:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:30:22 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:30:22 2011] Source does appear to be extended
[Mon Sep 26 16:30:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:31:43 2011] Not overwriting source region fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_src.reg
[Mon Sep 26 16:31:43 2011] Extracting stamp from image fullrun_ccd0_acisf03665_pi14-548_cl_sm2.00.img.gz, (820, 502) - (932, 614)
[Mon Sep 26 16:31:43 2011] Writing fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32.gif
[Mon Sep 26 16:33:47 2011] ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_src.evt and ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_bgd.evt exist, delete to re-create
[Mon Sep 26 16:33:47 2011] Size of ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_src.evt.gz[events] = 72 counts
[Mon Sep 26 16:33:47 2011] Mean chipx,y = (732.18, 654.69)
[Mon Sep 26 16:33:47 2011] Mean tdetx,y = (3715.69, 4399.82)
[Mon Sep 26 16:33:47 2011] chipx,y range = (707.00-755.00, 630.00-678.00)
[Mon Sep 26 16:33:47 2011] Size of ../../acisf03665/products/events/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 505 counts
[Mon Sep 26 16:33:47 2011] ../../acisf03665/products/images/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_src.img and ../../acisf03665/products/images/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_bgd.img exist, delete to re-create
[Mon Sep 26 16:33:47 2011] ../../acisf03665/products/spectra/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_src.pi and ../../acisf03665/products/spectra/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_bgd.pi exist, delete to re-create
[Mon Sep 26 16:33:47 2011] Not generating rmf since there are only 27 counts
[Mon Sep 26 16:33:50 2011] ../../acisf03665/products/lightcurves/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_src.lc and ../../acisf03665/products/lightcurves/fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_bgd.lc exist, delete to re-create
[Mon Sep 26 16:35:36 2011] 194.774
[Mon Sep 26 16:51:48 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:51:48 2011] Error reading totcts from fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32_src.pi.gz
[Mon Sep 26 16:51:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:51:48 2011] Using photon index=1.80, rate=0.000309, arf fullrun_ccd0_acisf03665_pi14-548_pass1_cl_src32.arf
[Mon Sep 26 16:51:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:51:48 2011] Updating source flux to 4.8e-15
[Mon Sep 26 16:52:06 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting