[Mon Oct  3 13:45:31 2011] Detection parameters:
  Position = (429.6, 565.9) = 10 1 23.91 55 55 32.7
  Extent = 0.5" x 0.5", rotation angle = 25 degrees
  Source counts = 52.5 +/- 7.5
  Background counts = 3.5
  Rate = 0.001 +/- 0.0002

[Mon Oct  3 13:45:32 2011] Off-axis axis estimate = 2.81'
[Mon Oct  3 13:45:47 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 13:45:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 13:45:47 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Mon Oct  3 13:45:47 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.871
[Mon Oct  3 13:45:47 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.54"
[Mon Oct  3 13:45:47 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass0_src2.ximg exists
[Mon Oct  3 13:45:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00362_pi14-548_cl_pass0_src2.csv
[Mon Oct  3 13:45:47 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Oct  3 13:45:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00362_pi14-548_cl_pass0_src2.csv
[Mon Oct  3 13:45:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00362_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00362_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 13:45:48 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Oct  3 13:45:48 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Oct  3 13:45:48 2011] Fit fullrun_ccd7_acisf00362_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Oct  3 13:45:51 2011] Spatial fit model total counts = 61.188100, observed total counts = 62.000000
[Mon Oct  3 13:45:51 2011] Offset between fit and detection position for source 2 = 0.666295 pixels
[Mon Oct  3 13:45:51 2011] 61.098900 total counts/ 11.886000 bgd. counts: snr = 14.274506
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.666295 pixels
  Position = (430.2, 566.2) = 10 1 23.91 55 55 32.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 49.2 +/- 7.8
  Background counts = 11.9
  Rate = 0.001 +/- 0.0002
[Mon Oct  3 13:45:51 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 13:45:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 13:45:51 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 13:45:51 2011] Source does appear to be extended
[Mon Oct  3 13:45:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 13:45:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 13:45:54 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct  3 13:45:54 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.115
[Mon Oct  3 13:45:54 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.45"
[Mon Oct  3 13:45:54 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass1_src2.ximg exists
[Mon Oct  3 13:45:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00362_pi14-548_cl_pass1_src2.csv
[Mon Oct  3 13:45:54 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Oct  3 13:45:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00362_pi14-548_cl_pass1_src2.csv
[Mon Oct  3 13:45:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00362_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00362_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 13:45:54 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Oct  3 13:45:54 2011] fullrun_ccd7_acisf00362_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Oct  3 13:45:54 2011] Fit fullrun_ccd7_acisf00362_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Oct  3 13:45:56 2011] Spatial fit model total counts = 61.999800, observed total counts = 62.000000
[Mon Oct  3 13:45:56 2011] Offset between fit and detection position for source 2 = 0.008204 pixels
[Mon Oct  3 13:45:56 2011] 61.372200 total counts/ 11.391400 bgd. counts: snr = 14.808622
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008204 pixels
  Position = (430.2, 566.2) = 10 1 23.91 55 55 32.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 50.0 +/- 7.8
  Background counts = 11.4
  Rate = 0.001 +/- 0.0002
[Mon Oct  3 13:45:56 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 13:45:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 13:45:56 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 13:45:56 2011] Source does appear to be extended
[Mon Oct  3 13:45:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 13:45:59 2011] Not overwriting source region fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_src.reg
[Mon Oct  3 13:45:59 2011] Extracting stamp from image fullrun_ccd7_acisf00362_pi14-548_cl_sm2.00.img.gz, (410, 546) - (451, 587)
[Mon Oct  3 13:45:59 2011] Writing fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2.gif
[Mon Oct  3 13:46:02 2011] ../../acisf00362/products/events/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_src.evt and ../../acisf00362/products/events/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct  3 13:46:02 2011] Size of ../../acisf00362/products/events/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_src.evt.gz[events] = 52 counts
[Mon Oct  3 13:46:02 2011] Mean chipx,y = (559.37, 588.08)
[Mon Oct  3 13:46:02 2011] Mean tdetx,y = (4476.37, 2290.08)
[Mon Oct  3 13:46:02 2011] chipx,y range = (544.00-579.00, 569.00-606.00)
[Mon Oct  3 13:46:02 2011] Size of ../../acisf00362/products/events/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 17 counts
[Mon Oct  3 13:46:02 2011] ../../acisf00362/products/images/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_src.img and ../../acisf00362/products/images/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct  3 13:46:02 2011] ../../acisf00362/products/spectra/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_src.pi and ../../acisf00362/products/spectra/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct  3 13:46:02 2011] Not generating rmf since there are only 49 counts
[Mon Oct  3 13:46:05 2011] ../../acisf00362/products/lightcurves/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_src.lc and ../../acisf00362/products/lightcurves/fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct  3 13:46:17 2011] 239.538
[Mon Oct  3 13:46:19 2011] Updating aperture counts using extracted products
[Mon Oct  3 13:46:19 2011] Error reading totcts from fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct  3 13:46:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 13:46:19 2011] Using photon index=1.80, rate=0.00105, arf fullrun_ccd7_acisf00362_pi14-548_pass1_cl_src2.arf
[Mon Oct  3 13:46:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 13:46:19 2011] Updating source flux to 5.7e-15
[Mon Oct  3 13:46:19 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting