[Wed Oct  5 20:51:29 2011] Detection parameters:
  Position = (456.7, 360.8) = 13 47 46.35 -11 46 42.6
  Extent = 0.8" x 0.6", rotation angle = 158 degrees
  Source counts = 21.3 +/- 4.8
  Background counts = 1.7
  Rate = 0.0004 +/- 8e-05

[Wed Oct  5 20:51:32 2011] Off-axis axis estimate = 4.73'
[Wed Oct  5 20:52:43 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:52:43 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Wed Oct  5 20:52:43 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.868
[Wed Oct  5 20:52:43 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.07"
[Wed Oct  5 20:52:44 2011] fullrun_ccd3_acisf03592_pi14-548_cl_pass0_src12.ximg exists
[Wed Oct  5 20:52:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03592_pi14-548_cl_pass0_src12.csv
[Wed Oct  5 20:52:44 2011] fullrun_ccd3_acisf03592_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Oct  5 20:52:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03592_pi14-548_cl_pass0_src12.csv
[Wed Oct  5 20:52:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03592_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03592_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:52:44 2011] fullrun_ccd3_acisf03592_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Oct  5 20:52:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03592_pi14-548_cl_pass0_tfrozen_src12.csv
[Wed Oct  5 20:52:44 2011] fullrun_ccd3_acisf03592_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Oct  5 20:52:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03592_pi14-548_cl_pass0_tfrozen_src12.csv
[Wed Oct  5 20:52:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03592_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03592_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:52:55 2011] Spatial fit model total counts = 23.096600, observed total counts = 27.000000
[Wed Oct  5 20:52:55 2011] Offset between fit and detection position for source 3 = 1.279247 pixels
[Wed Oct  5 20:52:55 2011] 21.041680 total counts/ 0.008480 bgd. counts: snr = 228.411344
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.279247 pixels
  Position = (457.8, 361.5) = 13 47 46.33 -11 46 42.5
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 21.0 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Wed Oct  5 20:52:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 20:52:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 20:52:55 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 20:52:55 2011] Source does appear to be extended
[Wed Oct  5 20:52:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 20:52:55 2011] Deleting source due to low Poisson probability 0.8