[Thu Oct 20 01:38:44 2011] Detection parameters:
  Position = (1224.4, 746.9) = 13 35 15.21 40 54 31.0
  Extent = 0.7" x 0.5", rotation angle = 145 degrees
  Source counts = 61.0 +/- 7.9
  Background counts = 1.0
  Rate = 0.003 +/- 0.0004

[Thu Oct 20 01:38:45 2011] Off-axis axis estimate = 3.27'
[Thu Oct 20 01:39:32 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 01:39:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 01:39:32 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Thu Oct 20 01:39:32 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Thu Oct 20 01:39:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.64"
[Thu Oct 20 01:39:33 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 01:39:33 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf03591_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 01:39:33 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 01:39:33 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf03591_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 01:39:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03591_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03591_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 01:39:33 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 01:39:33 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 01:39:33 2011] Fit fullrun_ccd2_acisf03591_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 01:39:41 2011] Spatial fit model total counts = 62.061900, observed total counts = 63.000000
[Thu Oct 20 01:39:41 2011] Offset between fit and detection position for source 1 = 0.799148 pixels
[Thu Oct 20 01:39:41 2011] 61.525800 total counts/ 1.060100 bgd. counts: snr = 58.726710
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.799148 pixels
  Position = (1225.1, 747.4) = 13 35 15.21 40 54 31.0
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 60.5 +/- 7.8
  Background counts = 1.1
  Rate = 0.003 +/- 0.0004
[Thu Oct 20 01:39:41 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 01:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 01:39:41 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 01:39:41 2011] Source does appear to be extended
[Thu Oct 20 01:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 01:39:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 01:39:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 01:39:58 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Thu Oct 20 01:39:58 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Thu Oct 20 01:39:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.76"
[Thu Oct 20 01:39:59 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 01:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03591_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 01:39:59 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 01:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03591_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 01:39:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03591_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03591_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 01:40:00 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 01:40:00 2011] fullrun_ccd2_acisf03591_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 01:40:00 2011] Fit fullrun_ccd2_acisf03591_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 01:40:07 2011] Spatial fit model total counts = 60.515700, observed total counts = 62.000000
[Thu Oct 20 01:40:07 2011] Offset between fit and detection position for source 1 = 0.016667 pixels
[Thu Oct 20 01:40:07 2011] 60.156543 total counts/ 0.034343 bgd. counts: snr = 324.424183
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016667 pixels
  Position = (1225.0, 747.4) = 13 35 15.21 40 54 31.0
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 60.1 +/- 7.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0004
[Thu Oct 20 01:40:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 01:40:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 01:40:07 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 01:40:07 2011] Source does appear to be extended
[Thu Oct 20 01:40:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 01:41:09 2011] Not overwriting source region fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 20 01:41:09 2011] Extracting stamp from image fullrun_ccd2_acisf03591_pi14-548_cl_sm2.00.img.gz, (1190, 713) - (1260, 782)
[Thu Oct 20 01:41:09 2011] Writing fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1.gif
[Thu Oct 20 01:41:10 2011] ../../acisf03591/products/events/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_src.evt and ../../acisf03591/products/events/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 20 01:41:10 2011] Size of ../../acisf03591/products/events/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_src.evt.gz[events] = 62 counts
[Thu Oct 20 01:41:10 2011] Mean chipx,y = (38.69, 826.06)
[Thu Oct 20 01:41:10 2011] Mean tdetx,y = (3887.06, 4047.31)
[Thu Oct 20 01:41:10 2011] chipx,y range = (17.00-54.00, 808.00-843.00)
[Thu Oct 20 01:41:10 2011] Size of ../../acisf03591/products/events/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Thu Oct 20 01:41:10 2011] ../../acisf03591/products/images/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_src.img and ../../acisf03591/products/images/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 20 01:41:10 2011] ../../acisf03591/products/spectra/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_src.pi and ../../acisf03591/products/spectra/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 20 01:41:10 2011] Not generating rmf since there are only 60 counts
[Thu Oct 20 01:41:13 2011] ../../acisf03591/products/lightcurves/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_src.lc and ../../acisf03591/products/lightcurves/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 20 01:43:13 2011] 199.934
[Thu Oct 20 01:44:00 2011] Updating aperture counts using extracted products
[Thu Oct 20 01:44:00 2011] Error reading totcts from fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 20 01:44:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 01:44:00 2011] Using photon index=1.80, rate=0.00307, arf fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 01:44:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 01:44:00 2011] Updating source flux to 3.4e-14
[Thu Oct 20 01:44:05 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 20 01:44:06 2011] acisf03591/analysis//spectral/fullrun_ccd2_acisf03591_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete