[Wed Oct  5 18:15:36 2011] Detection parameters:
  Position = (1110.9, 410.4) = 4 38 46.80 -28 59 13.7
  Extent = 2.4" x 1.6", rotation angle = 139 degrees
  Source counts = 72.8 +/- 12.4
  Background counts = 81.2
  Rate = 0.001 +/- 0.0002

[Wed Oct  5 18:15:36 2011] Off-axis axis estimate = 12.32'
[Wed Oct  5 18:16:35 2011] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:16:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 18:16:35 2011] Initial guess for spatial extent in simple fitting = 6.79"
[Wed Oct  5 18:16:35 2011] source mask rpix=13.8, npix_max = 818, mask sum = 783, frac = 0.957
[Wed Oct  5 18:16:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.79"
[Wed Oct  5 18:16:36 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 18:16:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03577_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 18:16:36 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 18:16:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03577_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 18:16:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03577_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03577_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:16:36 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 18:16:36 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 18:16:36 2011] Fit fullrun_ccd3_acisf03577_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 18:16:44 2011] Spatial fit model total counts = 367.749000, observed total counts = 342.000000
[Wed Oct  5 18:16:44 2011] Offset between fit and detection position for source 1 = 5.163710 pixels
[Wed Oct  5 18:16:44 2011] 367.873000 total counts/ 218.098000 bgd. counts: snr = 10.141764
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.163710 pixels
  Position = (1109.1, 405.5) = 4 38 46.88 -28 59 16.3
  Extent = 6.4 (5.2-7.6)", rotation angle = 0
  Source counts = 149.8 +/- 19.2
  Background counts = 218.1
  Rate = 0.002 +/- 0.0003
[Wed Oct  5 18:16:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 18:16:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 18:16:44 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 18:16:44 2011] Source does appear to be extended
[Wed Oct  5 18:16:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 18:17:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:17:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 18:17:08 2011] Initial guess for spatial extent in simple fitting = 6.38"
[Wed Oct  5 18:17:08 2011] source mask rpix=13.0, npix_max = 725, mask sum = 679, frac = 0.936
[Wed Oct  5 18:17:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.38"
[Wed Oct  5 18:17:09 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 18:17:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03577_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 18:17:10 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 18:17:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03577_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 18:17:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03577_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03577_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 18:17:11 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 18:17:12 2011] fullrun_ccd3_acisf03577_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 18:17:12 2011] Fit fullrun_ccd3_acisf03577_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 18:17:21 2011] Spatial fit model total counts = 329.299000, observed total counts = 314.000000
[Wed Oct  5 18:17:21 2011] Offset between fit and detection position for source 1 = 0.402716 pixels
[Wed Oct  5 18:17:21 2011] 329.729000 total counts/ 177.476000 bgd. counts: snr = 11.428679
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.402716 pixels
  Position = (1109.1, 405.1) = 4 38 46.88 -28 59 16.5
  Extent = 6.4 (5.2-7.6)", rotation angle = 0
  Source counts = 152.3 +/- 18.2
  Background counts = 177.5
  Rate = 0.002 +/- 0.0002
[Wed Oct  5 18:17:21 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 18:17:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 18:17:21 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 18:17:21 2011] Source does appear to be extended
[Wed Oct  5 18:17:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 18:17:42 2011] Not overwriting source region fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 18:17:42 2011] Extracting stamp from image fullrun_ccd3_acisf03577_pi14-548_cl_sm2.00.img.gz, (816, 112) - (1402, 698)
[Wed Oct  5 18:17:42 2011] Writing fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 18:17:42 2011] ../../acisf03577/products/events/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_src.evt and ../../acisf03577/products/events/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 18:17:42 2011] Size of ../../acisf03577/products/events/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_src.evt.gz[events] = 280 counts
[Wed Oct  5 18:17:42 2011] Mean chipx,y = (655.42, 995.35)
[Wed Oct  5 18:17:42 2011] Mean tdetx,y = (4136.65, 3716.42)
[Wed Oct  5 18:17:42 2011] chipx,y range = (595.00-716.00, 939.00-1022.00)
[Wed Oct  5 18:17:42 2011] Size of ../../acisf03577/products/events/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1141 counts
[Wed Oct  5 18:17:42 2011] ../../acisf03577/products/images/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_src.img and ../../acisf03577/products/images/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 18:17:42 2011] rmf not found, will run specextract
[Wed Oct  5 18:17:42 2011] arf not found, will run specextract
[Wed Oct  5 18:17:46 2011] ../../acisf03577/products/spectra/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_bkg.pi not found
[Wed Oct  5 18:17:46 2011] ../../acisf03577/products/spectra/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1.warf not found
[Wed Oct  5 18:17:46 2011] ../../acisf03577/products/spectra/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1.wrmf not found
[Wed Oct  5 18:17:46 2011] Removal of ../../acisf03577/products/spectra/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1.soff failed
[Wed Oct  5 18:17:46 2011] Failed to rename ../../acisf03577/products/spectra/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_grp.pi to ../../acisf03577/products/spectra/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_src.pi
[Wed Oct  5 18:18:01 2011] ../../acisf03577/products/lightcurves/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_src.lc and ../../acisf03577/products/lightcurves/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 18:18:31 2011] No arf file found
[Wed Oct  5 18:27:37 2011] Updating aperture counts using extracted products
[Wed Oct  5 18:27:37 2011] Error reading totcts from fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_src.pi
[Wed Oct  5 18:27:37 2011] No arf file for this source, not re-computing flux
[Wed Oct  5 18:27:39 2011] Source 1 has no response, skipping
[Wed Oct  5 18:27:40 2011] acisf03577/analysis//spectral/fullrun_ccd3_acisf03577_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete