[Tue Aug  7 23:56:58 2012] Detection parameters:
  Position = (456.7, 303.8) = 10 27 59.88 -43 54 43.6
  Extent = 0.5" x 0.5", rotation angle = 114 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Tue Aug  7 23:57:01 2012] Off-axis axis estimate = 1.66'
[Tue Aug  7 23:57:28 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 23:57:28 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Aug  7 23:57:28 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.298
[Tue Aug  7 23:57:28 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 0.40"
[Tue Aug  7 23:57:31 2012] fullrun_ccd7_acisf03569_pi14-548_cl_pass0_src33.ximg exists
[Tue Aug  7 23:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03569_pi14-548_cl_pass0_src33.csv
[Tue Aug  7 23:57:31 2012] fullrun_ccd7_acisf03569_pi14-548_cl_pass0_src33_1.ximg exists
[Tue Aug  7 23:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03569_pi14-548_cl_pass0_src33.csv
[Tue Aug  7 23:57:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03569_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03569_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 23:57:32 2012] fullrun_ccd7_acisf03569_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Tue Aug  7 23:57:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03569_pi14-548_cl_pass0_tfrozen_src33.csv
[Tue Aug  7 23:57:32 2012] fullrun_ccd7_acisf03569_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Aug  7 23:57:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03569_pi14-548_cl_pass0_tfrozen_src33.csv
[Tue Aug  7 23:57:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03569_pi14-548_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03569_pi14-548_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 23:57:41 2012] Spatial fit model total counts = 12.356400, observed total counts = 14.000000
[Tue Aug  7 23:57:41 2012] Offset between fit and detection position for source 16 = 0.708046 pixels
[Tue Aug  7 23:57:41 2012] 11.824000 total counts/ 2.930100 bgd. counts: snr = 5.195783
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.708046 pixels
  Position = (457.0, 304.4) = 10 27 59.89 -43 54 43.5
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 8.9 +/- 3.4
  Background counts = 2.9
  Rate = 0.0003 +/- 0.0001
[Tue Aug  7 23:57:41 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 23:57:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 23:57:41 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 23:57:41 2012] Source does appear to be extended
[Tue Aug  7 23:57:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 23:57:41 2012] Deleting source due to low Poisson probability 0.7