[Sun Oct 30 00:24:59 2011] Detection parameters:
  Position = (836.2, 513.6) = 14 13 49.76 -65 17 39.3
  Extent = 0.7" x 0.5", rotation angle = 138 degrees
  Source counts = 13.4 +/- 3.7
  Background counts = 0.6
  Rate = 0.0005 +/- 0.0002

[Sun Oct 30 00:25:00 2011] Off-axis axis estimate = 4.33'
[Sun Oct 30 00:25:54 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:25:54 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Sun Oct 30 00:25:54 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.086
[Sun Oct 30 00:25:54 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.93"
[Sun Oct 30 00:25:55 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct 30 00:25:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00356_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 00:25:55 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct 30 00:25:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00356_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 00:25:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00356_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00356_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:25:55 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct 30 00:25:55 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct 30 00:25:55 2011] Fit fullrun_ccd6_acisf00356_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct 30 00:26:05 2011] Spatial fit model total counts = 15.254000, observed total counts = 16.000000
[Sun Oct 30 00:26:05 2011] Offset between fit and detection position for source 5 = 0.701114 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.701114 pixels
  Position = (836.8, 514.0) = 14 13 49.75 -65 17 39.3
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Oct 30 00:26:05 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 00:26:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 00:26:05 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 00:26:05 2011] Source does appear to be extended
[Sun Oct 30 00:26:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 00:26:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:26:29 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Sun Oct 30 00:26:29 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Sun Oct 30 00:26:29 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.84"
[Sun Oct 30 00:26:29 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass1_src10.ximg exists
[Sun Oct 30 00:26:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00356_pi14-548_cl_pass1_src10.csv
[Sun Oct 30 00:26:29 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Oct 30 00:26:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00356_pi14-548_cl_pass1_src10.csv
[Sun Oct 30 00:26:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00356_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00356_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:26:29 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Oct 30 00:26:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00356_pi14-548_cl_pass1_tfrozen_src10.csv
[Sun Oct 30 00:26:29 2011] fullrun_ccd6_acisf00356_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Oct 30 00:26:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00356_pi14-548_cl_pass1_tfrozen_src10.csv
[Sun Oct 30 00:26:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00356_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00356_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:26:38 2011] Spatial fit model total counts = 14.924100, observed total counts = 16.000000
[Sun Oct 30 00:26:38 2011] Offset between fit and detection position for source 5 = 0.057634 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.057634 pixels
  Position = (836.7, 514.1) = 14 13 49.75 -65 17 39.3
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 14.1 +/- 3.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Oct 30 00:26:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 00:26:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 00:26:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 00:26:38 2011] Source does appear to be extended
[Sun Oct 30 00:26:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 00:27:47 2011] Not overwriting source region fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_src.reg
[Sun Oct 30 00:27:47 2011] Extracting stamp from image fullrun_ccd6_acisf00356_pi14-548_cl_sm2.00.img.gz, (799, 476) - (875, 552)
[Sun Oct 30 00:27:47 2011] Writing fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5.gif
[Sun Oct 30 00:28:17 2011] ../../acisf00356/products/events/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_src.evt and ../../acisf00356/products/events/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Oct 30 00:28:17 2011] Size of ../../acisf00356/products/events/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_src.evt.gz[events] = 15 counts
[Sun Oct 30 00:28:17 2011] Mean chipx,y = (742.73, 594.20)
[Sun Oct 30 00:28:17 2011] Mean tdetx,y = (3617.73, 2296.20)
[Sun Oct 30 00:28:17 2011] chipx,y range = (728.00-757.00, 576.00-612.00)
[Sun Oct 30 00:28:17 2011] Size of ../../acisf00356/products/events/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 6 counts
[Sun Oct 30 00:28:17 2011] ../../acisf00356/products/images/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_src.img and ../../acisf00356/products/images/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Oct 30 00:28:17 2011] ../../acisf00356/products/spectra/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_src.pi and ../../acisf00356/products/spectra/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Oct 30 00:28:17 2011] Not generating rmf since there are only 14 counts
[Sun Oct 30 00:28:20 2011] ../../acisf00356/products/lightcurves/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_src.lc and ../../acisf00356/products/lightcurves/fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Oct 30 00:28:36 2011] 209.522
[Sun Oct 30 00:29:55 2011] Updating aperture counts using extracted products
[Sun Oct 30 00:29:55 2011] Error reading totcts from fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Oct 30 00:29:55 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 00:29:55 2011] Using photon index=1.80, rate=0.000571, arf fullrun_ccd6_acisf00356_pi14-548_pass1_cl_src5.arf
[Sun Oct 30 00:29:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 00:29:55 2011] Updating source flux to 6.7e-15
[Sun Oct 30 00:30:11 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting