[Fri Oct  7 05:38:42 2011] Detection parameters:
  Position = (805.1, 367.1) = 17 48 4.26 -36 12 34.8
  Extent = 1.6" x 0.9", rotation angle = 80 degrees
  Source counts = 28.5 +/- 5.7
  Background counts = 3.5
  Rate = 0.002 +/- 0.0004

[Fri Oct  7 05:38:44 2011] Off-axis axis estimate = 5.27'
[Fri Oct  7 05:39:14 2011] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:39:14 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Fri Oct  7 05:39:14 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Fri Oct  7 05:39:14 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.29"
[Fri Oct  7 05:39:16 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct  7 05:39:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 05:39:16 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct  7 05:39:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 05:39:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:39:16 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct  7 05:39:16 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct  7 05:39:16 2011] Fit fullrun_ccd7_acisf03509_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct  7 05:39:23 2011] Spatial fit model total counts = 30.771900, observed total counts = 30.000000
[Fri Oct  7 05:39:23 2011] Offset between fit and detection position for source 10 = 2.252214 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.252214 pixels
  Position = (806.1, 369.1) = 17 48 4.24 -36 12 34.0
  Extent = 1.3 (1.0-1.8)", rotation angle = 0
  Source counts = 29.7 +/- 5.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct  7 05:39:23 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:39:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:39:23 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:39:23 2011] Source does appear to be extended
[Fri Oct  7 05:39:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:39:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:39:35 2011] Initial guess for spatial extent in simple fitting = 1.32"
[Fri Oct  7 05:39:35 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.890
[Fri Oct  7 05:39:35 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.32"
[Fri Oct  7 05:39:35 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct  7 05:39:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 05:39:35 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct  7 05:39:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 05:39:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:39:36 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct  7 05:39:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src7.csv
[Fri Oct  7 05:39:36 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct  7 05:39:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src7.csv
[Fri Oct  7 05:39:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:39:44 2011] Spatial fit model total counts = 26.200600, observed total counts = 30.000000
[Fri Oct  7 05:39:44 2011] Offset between fit and detection position for source 10 = 1.836276 pixels
[Fri Oct  7 05:39:44 2011] 22.829230 total counts/ 3.505630 bgd. counts: snr = 10.320601
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.836276 pixels
  Position = (806.7, 370.9) = 17 48 4.22 -36 12 33.2
  Extent = 0.9 (0.7-1.5)", rotation angle = 0
  Source counts = 19.3 +/- 4.8
  Background counts = 3.5
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 05:39:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:39:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:39:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:39:44 2011] Source does appear to be extended
[Fri Oct  7 05:39:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:41:34 2011] Not overwriting source region fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_src.reg
[Fri Oct  7 05:41:34 2011] Extracting stamp from image fullrun_ccd7_acisf03509_pi14-548_cl_sm2.00.img.gz, (764, 329) - (849, 413)
[Fri Oct  7 05:41:34 2011] Writing fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10.gif
[Fri Oct  7 05:42:05 2011] ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_src.evt and ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct  7 05:42:05 2011] Size of ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_src.evt.gz[events] = 26 counts
[Fri Oct  7 05:42:05 2011] Mean chipx,y = (849.31, 608.00)
[Fri Oct  7 05:42:05 2011] Mean tdetx,y = (4766.31, 2310.00)
[Fri Oct  7 05:42:05 2011] chipx,y range = (830.00-864.00, 592.00-630.00)
[Fri Oct  7 05:42:05 2011] Size of ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 18 counts
[Fri Oct  7 05:42:05 2011] ../../acisf03509/products/images/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_src.img and ../../acisf03509/products/images/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct  7 05:42:05 2011] ../../acisf03509/products/spectra/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_src.pi and ../../acisf03509/products/spectra/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct  7 05:42:05 2011] Not generating rmf since there are only 19 counts
[Fri Oct  7 05:42:09 2011] ../../acisf03509/products/lightcurves/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_src.lc and ../../acisf03509/products/lightcurves/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct  7 05:43:33 2011] 217.366
[Fri Oct  7 05:43:35 2011] Updating aperture counts using extracted products
[Fri Oct  7 05:43:35 2011] Error reading totcts from fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct  7 05:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 05:43:35 2011] Using photon index=1.80, rate=0.00122, arf fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src10.arf
[Fri Oct  7 05:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 05:43:35 2011] Updating source flux to 1.1e-14
[Fri Oct  7 05:43:38 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting