[Fri Oct  7 05:38:42 2011] Detection parameters:
  Position = (949.5, 1114.9) = 17 47 58.42 -36 6 26.8
  Extent = 0.8" x 0.5", rotation angle = 110 degrees
  Source counts = 213.4 +/- 14.7
  Background counts = 2.6
  Rate = 0.01 +/- 0.0009

[Fri Oct  7 05:38:44 2011] Off-axis axis estimate = 3.48'
[Fri Oct  7 05:39:14 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:39:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 05:39:14 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Oct  7 05:39:14 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.834
[Fri Oct  7 05:39:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.69"
[Fri Oct  7 05:39:15 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 05:39:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 05:39:16 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 05:39:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 05:39:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03509_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:39:16 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 05:39:16 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 05:39:16 2011] Fit fullrun_ccd7_acisf03509_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 05:39:23 2011] Spatial fit model total counts = 215.601000, observed total counts = 216.000000
[Fri Oct  7 05:39:23 2011] Offset between fit and detection position for source 1 = 0.676818 pixels
[Fri Oct  7 05:39:23 2011] 216.486220 total counts/ 5.839220 bgd. counts: snr = 87.172170
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.676818 pixels
  Position = (949.9, 1115.4) = 17 47 58.42 -36 6 26.8
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 210.6 +/- 14.7
  Background counts = 5.8
  Rate = 0.01 +/- 0.0009
[Fri Oct  7 05:39:23 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:39:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:39:23 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:39:23 2011] Source does appear to be extended
[Fri Oct  7 05:39:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:39:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:39:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 05:39:35 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Fri Oct  7 05:39:35 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.092
[Fri Oct  7 05:39:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.81"
[Fri Oct  7 05:39:35 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 05:39:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 05:39:35 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 05:39:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 05:39:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03509_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:39:36 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 05:39:36 2011] fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 05:39:36 2011] Fit fullrun_ccd7_acisf03509_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 05:39:44 2011] Spatial fit model total counts = 215.969000, observed total counts = 217.000000
[Fri Oct  7 05:39:44 2011] Offset between fit and detection position for source 1 = 0.003437 pixels
[Fri Oct  7 05:39:44 2011] 216.792420 total counts/ 7.201420 bgd. counts: snr = 78.102253
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003437 pixels
  Position = (949.9, 1115.4) = 17 47 58.42 -36 6 26.8
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 209.6 +/- 14.7
  Background counts = 7.2
  Rate = 0.01 +/- 0.0009
[Fri Oct  7 05:39:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:39:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:39:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:39:44 2011] Source does appear to be extended
[Fri Oct  7 05:39:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:41:32 2011] Not overwriting source region fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 05:41:32 2011] Extracting stamp from image fullrun_ccd7_acisf03509_pi14-548_cl_sm2.00.img.gz, (913, 1078) - (987, 1152)
[Fri Oct  7 05:41:32 2011] Writing fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 05:41:35 2011] ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_src.evt and ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 05:41:35 2011] Size of ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_src.evt.gz[events] = 214 counts
[Fri Oct  7 05:41:35 2011] Mean chipx,y = (287.34, 97.18)
[Fri Oct  7 05:41:35 2011] Mean tdetx,y = (4204.34, 1799.18)
[Fri Oct  7 05:41:35 2011] chipx,y range = (266.00-307.00, 79.00-117.00)
[Fri Oct  7 05:41:35 2011] Size of ../../acisf03509/products/events/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 18 counts
[Fri Oct  7 05:41:35 2011] ../../acisf03509/products/images/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_src.img and ../../acisf03509/products/images/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 05:41:35 2011] ../../acisf03509/products/spectra/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_src.pi and ../../acisf03509/products/spectra/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 05:41:42 2011] ../../acisf03509/products/lightcurves/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_src.lc and ../../acisf03509/products/lightcurves/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 05:43:33 2011] Keeping rmf generated by specextract
[Fri Oct  7 05:43:33 2011] 227.855
[Fri Oct  7 05:43:35 2011] Updating aperture counts using extracted products
[Fri Oct  7 05:43:35 2011] Error reading totcts from fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 05:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 05:43:35 2011] Using photon index=1.80, rate=0.0133, arf fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 05:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 05:43:35 2011] Updating source flux to 1.2e-13
[Fri Oct  7 05:43:46 2011] Reading fit data from acisf03509/analysis//spectral/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 05:43:46 2011] Spectral fit parameter nH value = 2.81153e+21
[Fri Oct  7 05:43:46 2011] Spectral fit parameter PhoIndex value = 3.64357
[Fri Oct  7 05:43:46 2011] Failed to get F(0.3-8.0) from acisf03509/analysis//spectral/fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 05:43:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 05:43:46 2011] Using Nh = 2.8e+21, photon index=3.64, rate=0.0133, arf fullrun_ccd7_acisf03509_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 05:43:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 05:43:46 2011] Updating source flux to 6.1e-14