[Sun Sep 25 23:55:51 2011] Detection parameters:
  Position = (435.5, 369.2) = 17 9 37.78 -26 41 59.1
  Extent = 0.7" x 0.6", rotation angle = 122 degrees
  Source counts = 20.3 +/- 4.6
  Background counts = 0.7
  Rate = 0.0009 +/- 0.0002

[Sun Sep 25 23:55:51 2011] Off-axis axis estimate = 5.91'
[Sun Sep 25 23:56:27 2011] Using EEF radius (= 1.59 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:56:27 2011] Initial guess for spatial extent in simple fitting = 1.59"
[Sun Sep 25 23:56:27 2011] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.011
[Sun Sep 25 23:56:27 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.59"
[Sun Sep 25 23:56:27 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass0_src6.ximg exists
[Sun Sep 25 23:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03507_pi14-548_cl_pass0_src6.csv
[Sun Sep 25 23:56:27 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Sep 25 23:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03507_pi14-548_cl_pass0_src6.csv
[Sun Sep 25 23:56:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03507_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03507_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:56:27 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Sep 25 23:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03507_pi14-548_cl_pass0_tfrozen_src6.csv
[Sun Sep 25 23:56:27 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Sep 25 23:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03507_pi14-548_cl_pass0_tfrozen_src6.csv
[Sun Sep 25 23:56:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03507_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03507_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:56:36 2011] Spatial fit model total counts = 29.779700, observed total counts = 33.000000
[Sun Sep 25 23:56:36 2011] Offset between fit and detection position for source 20 = 1.011615 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.011615 pixels
  Position = (435.0, 368.3) = 17 9 37.82 -26 41 59.8
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 30.8 +/- 5.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 23:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 23:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 23:56:36 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 23:56:36 2011] Source does appear to be extended
[Sun Sep 25 23:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 23:56:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:56:55 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Sun Sep 25 23:56:55 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.051
[Sun Sep 25 23:56:55 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.19"
[Sun Sep 25 23:56:56 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass1_src6.ximg exists
[Sun Sep 25 23:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03507_pi14-548_cl_pass1_src6.csv
[Sun Sep 25 23:56:56 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Sep 25 23:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03507_pi14-548_cl_pass1_src6.csv
[Sun Sep 25 23:56:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03507_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03507_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:56:56 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Sep 25 23:56:56 2011] fullrun_ccd3_acisf03507_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Sep 25 23:56:56 2011] Fit fullrun_ccd3_acisf03507_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Sep 25 23:57:06 2011] Spatial fit model total counts = 30.314000, observed total counts = 32.000000
[Sun Sep 25 23:57:06 2011] Offset between fit and detection position for source 20 = 0.269719 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.269719 pixels
  Position = (434.7, 368.2) = 17 9 37.82 -26 41 59.9
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 32.0 +/- 5.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 23:57:06 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 23:57:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 23:57:06 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 23:57:06 2011] Source does appear to be extended
[Sun Sep 25 23:57:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 00:03:23 2011] Not overwriting source region fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_src.reg
[Mon Sep 26 00:03:23 2011] Extracting stamp from image fullrun_ccd3_acisf03507_pi14-548_cl_sm2.00.img.gz, (379, 312) - (490, 424)
[Mon Sep 26 00:03:23 2011] Writing fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20.gif
[Mon Sep 26 00:04:05 2011] ../../acisf03507/products/events/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_src.evt and ../../acisf03507/products/events/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Mon Sep 26 00:04:05 2011] Size of ../../acisf03507/products/events/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_src.evt.gz[events] = 29 counts
[Mon Sep 26 00:04:05 2011] Mean chipx,y = (741.62, 318.55)
[Mon Sep 26 00:04:05 2011] Mean tdetx,y = (4813.45, 3802.62)
[Mon Sep 26 00:04:05 2011] chipx,y range = (723.00-761.00, 295.00-333.00)
[Mon Sep 26 00:04:05 2011] Size of ../../acisf03507/products/events/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 25 counts
[Mon Sep 26 00:04:05 2011] ../../acisf03507/products/images/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_src.img and ../../acisf03507/products/images/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Mon Sep 26 00:04:05 2011] Not generating rmf since there are only 32 counts
[Mon Sep 26 00:04:05 2011] arf not found, will run specextract
[Mon Sep 26 00:04:07 2011] ../../acisf03507/products/spectra/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_bkg.pi not found
[Mon Sep 26 00:04:07 2011] ../../acisf03507/products/spectra/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20.warf not found
[Mon Sep 26 00:04:07 2011] ../../acisf03507/products/spectra/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20.wrmf not found
[Mon Sep 26 00:04:07 2011] Removal of ../../acisf03507/products/spectra/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20.soff failed
[Mon Sep 26 00:04:07 2011] Failed to rename ../../acisf03507/products/spectra/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_grp.pi to ../../acisf03507/products/spectra/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_src.pi
[Mon Sep 26 00:04:14 2011] ../../acisf03507/products/lightcurves/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_src.lc and ../../acisf03507/products/lightcurves/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Mon Sep 26 00:05:26 2011] No arf file found
[Mon Sep 26 00:05:28 2011] Updating aperture counts using extracted products
[Mon Sep 26 00:05:28 2011] Error reading totcts from fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_src.pi
[Mon Sep 26 00:05:28 2011] No arf file for this source, not re-computing flux
[Mon Sep 26 00:05:33 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep 26 00:05:34 2011] acisf03507/analysis//spectral/fullrun_ccd3_acisf03507_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete