[Sat Oct 15 10:55:14 2011] Detection parameters:
  Position = (866.4, 891.4) = 10 24 13.33 -57 45 54.6
  Extent = 0.5" x 0.5", rotation angle = 163 degrees
  Source counts = 29.5 +/- 5.6
  Background counts = 1.5
  Rate = 0.0008 +/- 0.0002

[Sat Oct 15 10:55:22 2011] Off-axis axis estimate = 1.82'
[Sat Oct 15 10:57:05 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 10:57:05 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Oct 15 10:57:05 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.252
[Sat Oct 15 10:57:05 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.41"
[Sat Oct 15 10:57:08 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass0_src26.ximg exists
[Sat Oct 15 10:57:08 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass0_src26_1.ximg exists
[Sat Oct 15 10:57:08 2011] Fit fullrun_ccd3_acisf03501_pi14-548_cl_pass0_src26 appears to have run properly
[Sat Oct 15 10:57:10 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sat Oct 15 10:57:10 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Oct 15 10:57:10 2011] Fit fullrun_ccd3_acisf03501_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Oct 15 10:57:42 2011] Spatial fit model total counts = 31.744000, observed total counts = 33.000000
[Sat Oct 15 10:57:42 2011] Offset between fit and detection position for source 13 = 0.879794 pixels
[Sat Oct 15 10:57:42 2011] 30.927760 total counts/ 1.698060 bgd. counts: snr = 22.430959
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.879794 pixels
  Position = (867.2, 891.9) = 10 24 13.32 -57 45 54.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 29.2 +/- 5.6
  Background counts = 1.7
  Rate = 0.0008 +/- 0.0002
[Sat Oct 15 10:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 10:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 10:57:42 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 10:57:42 2011] Source does appear to be extended
[Sat Oct 15 10:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 10:58:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 10:58:13 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Oct 15 10:58:13 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.578
[Sat Oct 15 10:58:13 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.40"
[Sat Oct 15 10:58:15 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass1_src26.ximg exists
[Sat Oct 15 10:58:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03501_pi14-548_cl_pass1_src26.csv
[Sat Oct 15 10:58:15 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass1_src26_1.ximg exists
[Sat Oct 15 10:58:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03501_pi14-548_cl_pass1_src26.csv
[Sat Oct 15 10:58:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03501_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03501_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 10:58:17 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Sat Oct 15 10:58:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03501_pi14-548_cl_pass1_tfrozen_src26.csv
[Sat Oct 15 10:58:17 2011] fullrun_ccd3_acisf03501_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Oct 15 10:58:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03501_pi14-548_cl_pass1_tfrozen_src26.csv
[Sat Oct 15 10:58:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03501_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03501_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 10:58:44 2011] Spatial fit model total counts = 29.720100, observed total counts = 33.000000
[Sat Oct 15 10:58:44 2011] Offset between fit and detection position for source 13 = 0.036741 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.036741 pixels
  Position = (867.2, 891.9) = 10 24 13.32 -57 45 54.5
  Extent = 0.5 (0.4-0.6)" x 0.3 (0.2-0.4)", rotation angle = 240 (305-90) degrees
  Source counts = 28.5 +/- 5.3
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Sat Oct 15 10:58:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 10:58:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 10:58:44 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 10:58:44 2011] Source does appear to be extended
[Sat Oct 15 10:58:44 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Sat Oct 15 11:05:18 2011] Not overwriting source region fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_src.reg
[Sat Oct 15 11:05:18 2011] Extracting stamp from image fullrun_ccd3_acisf03501_pi14-548_cl_sm2.00.img.gz, (846, 871) - (888, 913)
[Sat Oct 15 11:05:18 2011] Writing fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13.gif
[Sat Oct 15 11:06:32 2011] ../../acisf03501/products/events/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_src.evt and ../../acisf03501/products/events/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sat Oct 15 11:06:32 2011] Size of ../../acisf03501/products/events/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_src.evt.gz[events] = 29 counts
[Sat Oct 15 11:06:32 2011] Mean chipx,y = (871.52, 803.69)
[Sat Oct 15 11:06:32 2011] Mean tdetx,y = (4328.31, 3932.52)
[Sat Oct 15 11:06:32 2011] chipx,y range = (856.00-891.00, 789.00-821.00)
[Sat Oct 15 11:06:32 2011] Size of ../../acisf03501/products/events/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 9 counts
[Sat Oct 15 11:06:32 2011] ../../acisf03501/products/images/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_src.img and ../../acisf03501/products/images/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sat Oct 15 11:06:32 2011] ../../acisf03501/products/spectra/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_src.pi and ../../acisf03501/products/spectra/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sat Oct 15 11:06:32 2011] Not generating rmf since there are only 28 counts
[Sat Oct 15 11:06:35 2011] ../../acisf03501/products/lightcurves/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_src.lc and ../../acisf03501/products/lightcurves/fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sat Oct 15 11:08:36 2011] 201.101
[Sat Oct 15 11:09:03 2011] Updating aperture counts using extracted products
[Sat Oct 15 11:09:03 2011] Error reading totcts from fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13_src.pi.gz
[Sat Oct 15 11:09:04 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 11:09:04 2011] Using photon index=1.80, rate=0.000788, arf fullrun_ccd3_acisf03501_pi14-548_pass1_cl_src13.arf
[Sat Oct 15 11:09:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 11:09:04 2011] Updating source flux to 1.2e-14
[Sat Oct 15 11:09:29 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting