[Mon Sep 26 04:52:54 2011] Detection parameters:
  Position = (941.1, 758.8) = 12 18 8.44 47 16 13.4
  Extent = 2.8" x 2.0", rotation angle = 21 degrees
  Source counts = 341.5 +/- 19.2
  Background counts = 26.5
  Rate = 0.02 +/- 0.001

[Mon Sep 26 04:52:54 2011] Off-axis axis estimate = 7.99'
[Mon Sep 26 04:53:53 2011] Using EEF radius (= 2.83 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:53:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:53:53 2011] Initial guess for spatial extent in simple fitting = 2.83"
[Mon Sep 26 04:53:53 2011] source mask rpix=5.7, npix_max = 155, mask sum = 144, frac = 0.923
[Mon Sep 26 04:53:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.83"
[Mon Sep 26 04:53:53 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 04:53:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00350_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 04:53:53 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 04:53:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00350_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 04:53:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00350_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00350_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:53:53 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 04:53:53 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 04:53:53 2011] Fit fullrun_ccd6_acisf00350_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 04:54:01 2011] Spatial fit model total counts = 411.178000, observed total counts = 406.000000
[Mon Sep 26 04:54:01 2011] Offset between fit and detection position for source 1 = 0.198212 pixels
[Mon Sep 26 04:54:01 2011] 410.439350 total counts/ 7.673350 bgd. counts: snr = 145.398624
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.198212 pixels
  Position = (941.2, 759.0) = 12 18 8.46 47 16 13.2
  Extent = 3.6 (3.3-3.9)", rotation angle = 0
  Source counts = 402.8 +/- 20.3
  Background counts = 7.7
  Rate = 0.03 +/- 0.001
[Mon Sep 26 04:54:01 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:54:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:54:01 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:54:01 2011] Source does appear to be extended
[Mon Sep 26 04:54:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:54:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:54:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:54:30 2011] Initial guess for spatial extent in simple fitting = 3.62"
[Mon Sep 26 04:54:30 2011] source mask rpix=7.4, npix_max = 246, mask sum = 256, frac = 1.037
[Mon Sep 26 04:54:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.62"
[Mon Sep 26 04:54:30 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 04:54:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00350_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 04:54:30 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 04:54:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00350_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 04:54:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00350_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00350_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:54:30 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 04:54:30 2011] fullrun_ccd6_acisf00350_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 04:54:30 2011] Fit fullrun_ccd6_acisf00350_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 04:54:38 2011] Spatial fit model total counts = 410.406000, observed total counts = 410.000000
[Mon Sep 26 04:54:38 2011] Offset between fit and detection position for source 1 = 0.368885 pixels
[Mon Sep 26 04:54:38 2011] 410.329800 total counts/ 11.563800 bgd. counts: snr = 117.264846
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.368885 pixels
  Position = (940.9, 758.8) = 12 18 8.48 47 16 13.2
  Extent = 3.6 (3.4-3.8)", rotation angle = 0
  Source counts = 398.8 +/- 20.3
  Background counts = 11.6
  Rate = 0.03 +/- 0.001
[Mon Sep 26 04:54:38 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:54:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:54:38 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:54:38 2011] Source does appear to be extended
[Mon Sep 26 04:54:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:55:46 2011] Not overwriting source region fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_src.reg
[Mon Sep 26 04:55:46 2011] Extracting stamp from image fullrun_ccd6_acisf00350_pi14-548_cl_sm2.00.img.gz, (777, 595) - (1105, 923)
[Mon Sep 26 04:55:47 2011] Writing fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1.gif
[Mon Sep 26 04:55:48 2011] ../../acisf00350/products/events/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_src.evt and ../../acisf00350/products/events/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Sep 26 04:55:48 2011] Size of ../../acisf00350/products/events/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_src.evt.gz[events] = 406 counts
[Mon Sep 26 04:55:48 2011] Mean chipx,y = (303.08, 706.66)
[Mon Sep 26 04:55:48 2011] Mean tdetx,y = (3178.08, 2408.66)
[Mon Sep 26 04:55:48 2011] chipx,y range = (273.00-334.00, 675.00-743.00)
[Mon Sep 26 04:55:48 2011] Size of ../../acisf00350/products/events/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 98 counts
[Mon Sep 26 04:55:48 2011] ../../acisf00350/products/images/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_src.img and ../../acisf00350/products/images/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Sep 26 04:55:48 2011] ../../acisf00350/products/spectra/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_src.pi and ../../acisf00350/products/spectra/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Sep 26 04:55:50 2011] ../../acisf00350/products/lightcurves/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_src.lc and ../../acisf00350/products/lightcurves/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Sep 26 04:56:33 2011] Keeping rmf generated by specextract
[Mon Sep 26 04:56:33 2011] 187.263
[Mon Sep 26 04:59:22 2011] Updating aperture counts using extracted products
[Mon Sep 26 04:59:22 2011] Error reading totcts from fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Sep 26 04:59:23 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 04:59:23 2011] Using photon index=1.80, rate=0.0284, arf fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 04:59:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 04:59:23 2011] Updating source flux to 2.8e-13
[Mon Sep 26 04:59:41 2011] Reading fit data from acisf00350/analysis//spectral/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_pl.csv
[Mon Sep 26 04:59:41 2011] Spectral fit parameter nH value = 6.55255e+20
[Mon Sep 26 04:59:41 2011] Spectral fit parameter PhoIndex value = 2.14617
[Mon Sep 26 04:59:41 2011] Failed to get F(0.3-8.0) from acisf00350/analysis//spectral/fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 04:59:41 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 04:59:41 2011] Using Nh = 6.6e+20, photon index=2.15, rate=0.0284, arf fullrun_ccd6_acisf00350_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 04:59:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 04:59:41 2011] Updating source flux to 2.5e-13