[Tue Oct 18 16:18:45 2011] Detection parameters:
  Position = (81.9, 737.8) = 5 35 13.44 -5 23 40.2
  Extent = 0.5" x 0.5", rotation angle = 134 degrees
  Source counts = 187.2 +/- 14.2
  Background counts = 15.8
  Rate = 0.003 +/- 0.0002

[Tue Oct 18 16:18:49 2011] Off-axis axis estimate = 0.89'
[Tue Oct 18 16:23:34 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 16:23:34 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct 18 16:23:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Tue Oct 18 16:23:34 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 0.38"
[Tue Oct 18 16:23:37 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass0_src45.ximg exists
[Tue Oct 18 16:23:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03498_pi14-548_cl_pass0_src45.csv
[Tue Oct 18 16:23:37 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass0_src45_1.ximg exists
[Tue Oct 18 16:23:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03498_pi14-548_cl_pass0_src45.csv
[Tue Oct 18 16:23:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03498_pi14-548_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03498_pi14-548_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 16:23:39 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass0_tfrozen_src45.ximg exists
[Tue Oct 18 16:23:39 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Oct 18 16:23:39 2011] Fit fullrun_ccd1_acisf03498_pi14-548_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Oct 18 16:24:47 2011] Spatial fit model total counts = 230.310000, observed total counts = 219.000000
[Tue Oct 18 16:24:47 2011] Offset between fit and detection position for source 78 = 0.721393 pixels
[Tue Oct 18 16:24:47 2011] 231.562200 total counts/ 40.698200 bgd. counts: snr = 29.918266
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.721393 pixels
  Position = (82.4, 738.4) = 5 35 13.44 -5 23 40.2
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 190.9 +/- 15.2
  Background counts = 40.7
  Rate = 0.003 +/- 0.0002
[Tue Oct 18 16:24:47 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 16:24:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 16:24:47 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 16:24:47 2011] Source does appear to be extended
[Tue Oct 18 16:24:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 16:26:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 16:26:21 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct 18 16:26:21 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.393
[Tue Oct 18 16:26:21 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 0.38"
[Tue Oct 18 16:26:24 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass1_src45.ximg exists
[Tue Oct 18 16:26:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03498_pi14-548_cl_pass1_src45.csv
[Tue Oct 18 16:26:24 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass1_src45_1.ximg exists
[Tue Oct 18 16:26:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03498_pi14-548_cl_pass1_src45.csv
[Tue Oct 18 16:26:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03498_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03498_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 16:26:27 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Tue Oct 18 16:26:27 2011] fullrun_ccd1_acisf03498_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Tue Oct 18 16:26:27 2011] Fit fullrun_ccd1_acisf03498_pi14-548_cl_pass1_tfrozen_src45 appears to have run properly
[Tue Oct 18 16:27:32 2011] Spatial fit model total counts = 229.310000, observed total counts = 219.000000
[Tue Oct 18 16:27:32 2011] Offset between fit and detection position for source 78 = 0.002095 pixels
[Tue Oct 18 16:27:32 2011] 230.535000 total counts/ 40.045000 bgd. counts: snr = 30.102186
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.002095 pixels
  Position = (82.4, 738.3) = 5 35 13.44 -5 23 40.2
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 190.5 +/- 15.2
  Background counts = 40.0
  Rate = 0.003 +/- 0.0002
[Tue Oct 18 16:27:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 16:27:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 16:27:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 16:27:33 2011] Source does appear to be extended
[Tue Oct 18 16:27:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 16:35:49 2011] Not overwriting source region fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_src.reg
[Tue Oct 18 16:35:49 2011] Extracting stamp from image fullrun_ccd1_acisf03498_pi14-548_cl_sm2.00.img.gz, (65, 721) - (100, 756)
[Tue Oct 18 16:35:49 2011] Writing fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78.gif
[Tue Oct 18 16:38:02 2011] ../../acisf03498/products/events/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_src.evt and ../../acisf03498/products/events/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_bgd.evt exist, delete to re-create
[Tue Oct 18 16:38:02 2011] Size of ../../acisf03498/products/events/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_src.evt.gz[events] = 197 counts
[Tue Oct 18 16:38:02 2011] Mean chipx,y = (14.67, 931.62)
[Tue Oct 18 16:38:02 2011] Mean tdetx,y = (4200.38, 4121.67)
[Tue Oct 18 16:38:02 2011] chipx,y range = (2.00-23.00, 913.00-949.00)
[Tue Oct 18 16:38:02 2011] Size of ../../acisf03498/products/events/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_bgd.evt.gz[events] = 32 counts
[Tue Oct 18 16:38:02 2011] ../../acisf03498/products/images/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_src.img and ../../acisf03498/products/images/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_bgd.img exist, delete to re-create
[Tue Oct 18 16:38:02 2011] ../../acisf03498/products/spectra/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_src.pi and ../../acisf03498/products/spectra/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_bgd.pi exist, delete to re-create
[Tue Oct 18 16:38:04 2011] ../../acisf03498/products/lightcurves/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_src.lc and ../../acisf03498/products/lightcurves/fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_bgd.lc exist, delete to re-create
[Tue Oct 18 16:42:00 2011] Keeping rmf generated by specextract
[Tue Oct 18 16:42:00 2011] 111.56
[Tue Oct 18 17:03:00 2011] Updating aperture counts using extracted products
[Tue Oct 18 17:03:00 2011] Error reading totcts from fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78_src.pi.gz
[Tue Oct 18 17:03:02 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 17:03:02 2011] Using photon index=1.80, rate=0.00276, arf fullrun_ccd1_acisf03498_pi14-548_pass1_cl_src78.arf
[Tue Oct 18 17:03:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 17:03:02 2011] Updating source flux to 5.4e-14