[Sat Sep 24 18:15:59 2011] Detection parameters:
  Position = (1212.4, 899.8) = 14 25 12.02 35 31 24.0
  Extent = 2.3" x 1.5", rotation angle = 9 degrees
  Source counts = 88.3 +/- 10.0
  Background counts = 11.7
  Rate = 0.002 +/- 0.0002

[Sat Sep 24 18:15:59 2011] Off-axis axis estimate = 6.77'
[Sat Sep 24 18:17:12 2011] Using EEF radius (= 2.04 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:17:12 2011] Initial guess for spatial extent in simple fitting = 2.04"
[Sat Sep 24 18:17:12 2011] source mask rpix=4.2, npix_max = 86, mask sum = 81, frac = 0.935
[Sat Sep 24 18:17:12 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.04"
[Sat Sep 24 18:17:12 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass0_src3.ximg exists
[Sat Sep 24 18:17:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03482_pi14-548_cl_pass0_src3.csv
[Sat Sep 24 18:17:12 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Sep 24 18:17:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03482_pi14-548_cl_pass0_src3.csv
[Sat Sep 24 18:17:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03482_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03482_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:17:13 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Sep 24 18:17:13 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Sep 24 18:17:13 2011] Fit fullrun_ccd2_acisf03482_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Sep 24 18:17:30 2011] Spatial fit model total counts = 93.999800, observed total counts = 94.000000
[Sat Sep 24 18:17:30 2011] Offset between fit and detection position for source 24 = 0.361156 pixels
[Sat Sep 24 18:17:30 2011] 94.002800 total counts/ 17.641100 bgd. counts: snr = 18.180790
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.361156 pixels
  Position = (1212.7, 900.1) = 14 25 12.03 35 31 23.9
  Extent = 2.0 (1.6-2.4)", rotation angle = 0
  Source counts = 76.4 +/- 9.7
  Background counts = 17.6
  Rate = 0.001 +/- 0.0002
[Sat Sep 24 18:17:30 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:17:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:17:30 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:17:30 2011] Source does appear to be extended
[Sat Sep 24 18:17:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:18:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:18:03 2011] Initial guess for spatial extent in simple fitting = 1.97"
[Sat Sep 24 18:18:03 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.997
[Sat Sep 24 18:18:03 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.97"
[Sat Sep 24 18:18:03 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass1_src3.ximg exists
[Sat Sep 24 18:18:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03482_pi14-548_cl_pass1_src3.csv
[Sat Sep 24 18:18:03 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Sep 24 18:18:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03482_pi14-548_cl_pass1_src3.csv
[Sat Sep 24 18:18:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03482_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03482_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:18:04 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Sep 24 18:18:04 2011] fullrun_ccd2_acisf03482_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Sep 24 18:18:04 2011] Fit fullrun_ccd2_acisf03482_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Sep 24 18:18:20 2011] Spatial fit model total counts = 90.317800, observed total counts = 91.000000
[Sat Sep 24 18:18:20 2011] Offset between fit and detection position for source 24 = 0.258517 pixels
[Sat Sep 24 18:18:20 2011] 90.774280 total counts/ 5.626380 bgd. counts: snr = 35.897104
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.258517 pixels
  Position = (1212.7, 899.8) = 14 25 12.02 35 31 23.8
  Extent = 2.1 (1.7-2.5)", rotation angle = 0
  Source counts = 85.1 +/- 9.5
  Background counts = 5.6
  Rate = 0.001 +/- 0.0002
[Sat Sep 24 18:18:20 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:18:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:18:20 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:18:20 2011] Source does appear to be extended
[Sat Sep 24 18:18:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:21:28 2011] Not overwriting source region fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_src.reg
[Sat Sep 24 18:21:28 2011] Extracting stamp from image fullrun_ccd2_acisf03482_pi14-548_cl_sm2.00.img.gz, (1117, 804) - (1308, 995)
[Sat Sep 24 18:21:28 2011] Writing fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24.gif
[Sat Sep 24 18:21:36 2011] ../../acisf03482/products/events/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_src.evt and ../../acisf03482/products/events/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sat Sep 24 18:21:36 2011] Size of ../../acisf03482/products/events/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_src.evt.gz[events] = 103 counts
[Sat Sep 24 18:21:36 2011] Mean chipx,y = (52.10, 244.55)
[Sat Sep 24 18:21:36 2011] Mean tdetx,y = (3305.55, 4033.90)
[Sat Sep 24 18:21:36 2011] chipx,y range = (26.00-77.00, 216.00-267.00)
[Sat Sep 24 18:21:36 2011] Size of ../../acisf03482/products/events/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 135 counts
[Sat Sep 24 18:21:36 2011] ../../acisf03482/products/images/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_src.img and ../../acisf03482/products/images/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_bgd.img exist, delete to re-create
[Sat Sep 24 18:21:36 2011] ../../acisf03482/products/spectra/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_src.pi and ../../acisf03482/products/spectra/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sat Sep 24 18:21:36 2011] Not generating rmf since there are only 85 counts
[Sat Sep 24 18:21:39 2011] ../../acisf03482/products/lightcurves/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_src.lc and ../../acisf03482/products/lightcurves/fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sat Sep 24 18:22:53 2011] 180.52
[Sat Sep 24 18:24:49 2011] Updating aperture counts using extracted products
[Sat Sep 24 18:24:49 2011] Error reading totcts from fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24_src.pi.gz
[Sat Sep 24 18:24:49 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 18:24:49 2011] Using photon index=1.80, rate=0.00147, arf fullrun_ccd2_acisf03482_pi14-548_pass1_cl_src24.arf
[Sat Sep 24 18:24:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 18:24:49 2011] Updating source flux to 1.8e-14
[Sat Sep 24 18:25:04 2011] Source 24 has fewer than 100.000000 counts, skipping spectral fitting