[Sat Sep 24 18:15:56 2011] Detection parameters:
  Position = (1002.0, 333.0) = 14 25 25.76 35 38 41.2
  Extent = 0.6" x 0.5", rotation angle = 25 degrees
  Source counts = 13.8 +/- 3.9
  Background counts = 1.2
  Rate = 0.0002 +/- 7e-05

[Sat Sep 24 18:15:57 2011] Off-axis axis estimate = 3.79'
[Sat Sep 24 18:17:11 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:17:11 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Sat Sep 24 18:17:11 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Sat Sep 24 18:17:11 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.77"
[Sat Sep 24 18:17:11 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src13.ximg exists
[Sat Sep 24 18:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src13.csv
[Sat Sep 24 18:17:11 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Sep 24 18:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src13.csv
[Sat Sep 24 18:17:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:17:12 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Sep 24 18:17:12 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Sep 24 18:17:12 2011] Fit fullrun_ccd1_acisf03482_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Sep 24 18:17:27 2011] Spatial fit model total counts = 20.999700, observed total counts = 21.000000
[Sat Sep 24 18:17:27 2011] Offset between fit and detection position for source 6 = 0.403796 pixels
[Sat Sep 24 18:17:27 2011] 21.215960 total counts/ 8.227760 bgd. counts: snr = 4.528018
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.403796 pixels
  Position = (1002.3, 333.4) = 14 25 25.77 35 38 41.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 13.0 +/- 4.6
  Background counts = 8.2
  Rate = 0.0002 +/- 8e-05
[Sat Sep 24 18:17:27 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:17:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:17:27 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:17:27 2011] Source does appear to be extended
[Sat Sep 24 18:17:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:18:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:18:02 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Sat Sep 24 18:18:02 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.769
[Sat Sep 24 18:18:02 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.60"
[Sat Sep 24 18:18:02 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src13.ximg exists
[Sat Sep 24 18:18:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src13.csv
[Sat Sep 24 18:18:02 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Sep 24 18:18:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src13.csv
[Sat Sep 24 18:18:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:18:03 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Sep 24 18:18:03 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Sep 24 18:18:03 2011] Fit fullrun_ccd1_acisf03482_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Sep 24 18:18:16 2011] Spatial fit model total counts = 20.999800, observed total counts = 21.000000
[Sat Sep 24 18:18:16 2011] Offset between fit and detection position for source 6 = 0.001923 pixels
[Sat Sep 24 18:18:16 2011] 21.215040 total counts/ 8.213840 bgd. counts: snr = 4.536389
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.001923 pixels
  Position = (1002.3, 333.4) = 14 25 25.77 35 38 41.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 13.0 +/- 4.6
  Background counts = 8.2
  Rate = 0.0002 +/- 8e-05
[Sat Sep 24 18:18:16 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:18:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:18:16 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:18:16 2011] Source does appear to be extended
[Sat Sep 24 18:18:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:20:14 2011] Not overwriting source region fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_src.reg
[Sat Sep 24 18:20:14 2011] Extracting stamp from image fullrun_ccd1_acisf03482_pi14-548_cl_sm2.00.img.gz, (975, 306) - (1030, 361)
[Sat Sep 24 18:20:14 2011] Writing fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6.gif
[Sat Sep 24 18:20:59 2011] ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_src.evt and ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat Sep 24 18:20:59 2011] Size of ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_src.evt.gz[events] = 15 counts
[Sat Sep 24 18:20:59 2011] Mean chipx,y = (389.60, 991.47)
[Sat Sep 24 18:20:59 2011] Mean tdetx,y = (4140.53, 4496.60)
[Sat Sep 24 18:20:59 2011] chipx,y range = (369.00-407.00, 978.00-1012.00)
[Sat Sep 24 18:20:59 2011] Size of ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 12 counts
[Sat Sep 24 18:20:59 2011] ../../acisf03482/products/images/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_src.img and ../../acisf03482/products/images/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat Sep 24 18:20:59 2011] ../../acisf03482/products/spectra/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_src.pi and ../../acisf03482/products/spectra/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat Sep 24 18:20:59 2011] Not generating rmf since there are only 13 counts
[Sat Sep 24 18:21:02 2011] ../../acisf03482/products/lightcurves/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_src.lc and ../../acisf03482/products/lightcurves/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sat Sep 24 18:21:28 2011] 193.602
[Sat Sep 24 18:24:48 2011] Updating aperture counts using extracted products
[Sat Sep 24 18:24:48 2011] Error reading totcts from fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Sep 24 18:24:49 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 18:24:49 2011] Using photon index=1.80, rate=0.000224, arf fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src6.arf
[Sat Sep 24 18:24:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 18:24:49 2011] Updating source flux to 2.5e-15
[Sat Sep 24 18:24:58 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting