[Sat Sep 24 18:15:56 2011] Detection parameters:
  Position = (124.9, 719.4) = 14 26 1.18 35 41 51.1
  Extent = 2.2" x 1.4", rotation angle = 80 degrees
  Source counts = 73.7 +/- 9.3
  Background counts = 12.3
  Rate = 0.001 +/- 0.0002

[Sat Sep 24 18:15:57 2011] Off-axis axis estimate = 7.77'
[Sat Sep 24 18:17:11 2011] Using EEF radius (= 2.67 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:17:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 18:17:11 2011] Initial guess for spatial extent in simple fitting = 2.67"
[Sat Sep 24 18:17:11 2011] source mask rpix=5.4, npix_max = 140, mask sum = 144, frac = 1.024
[Sat Sep 24 18:17:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.67"
[Sat Sep 24 18:17:11 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src3.ximg exists
[Sat Sep 24 18:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src3.csv
[Sat Sep 24 18:17:11 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Sep 24 18:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src3.csv
[Sat Sep 24 18:17:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03482_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:17:11 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Sep 24 18:17:11 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Sep 24 18:17:11 2011] Fit fullrun_ccd1_acisf03482_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Sep 24 18:17:27 2011] Spatial fit model total counts = 94.154300, observed total counts = 94.000000
[Sat Sep 24 18:17:27 2011] Offset between fit and detection position for source 2 = 0.656895 pixels
[Sat Sep 24 18:17:27 2011] 93.807600 total counts/ 17.601600 bgd. counts: snr = 18.164067
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.656895 pixels
  Position = (125.4, 719.8) = 14 26 1.18 35 41 51.1
  Extent = 2.3 (1.8-2.9)", rotation angle = 0
  Source counts = 76.2 +/- 9.7
  Background counts = 17.6
  Rate = 0.001 +/- 0.0002
[Sat Sep 24 18:17:27 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:17:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:17:27 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:17:27 2011] Source does appear to be extended
[Sat Sep 24 18:17:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:18:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 18:18:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 18:18:02 2011] Initial guess for spatial extent in simple fitting = 2.25"
[Sat Sep 24 18:18:02 2011] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.971
[Sat Sep 24 18:18:02 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.25"
[Sat Sep 24 18:18:02 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src3.ximg exists
[Sat Sep 24 18:18:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src3.csv
[Sat Sep 24 18:18:02 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Sep 24 18:18:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src3.csv
[Sat Sep 24 18:18:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03482_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:18:02 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Sep 24 18:18:02 2011] fullrun_ccd1_acisf03482_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Sep 24 18:18:02 2011] Fit fullrun_ccd1_acisf03482_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Sep 24 18:18:16 2011] Spatial fit model total counts = 88.750400, observed total counts = 89.000000
[Sat Sep 24 18:18:16 2011] Offset between fit and detection position for source 2 = 0.226220 pixels
[Sat Sep 24 18:18:16 2011] 88.149780 total counts/ 8.757580 bgd. counts: snr = 26.827844
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.226220 pixels
  Position = (125.6, 719.9) = 14 26 1.17 35 41 51.1
  Extent = 2.3 (1.7-2.9)", rotation angle = 0
  Source counts = 79.4 +/- 9.4
  Background counts = 8.8
  Rate = 0.001 +/- 0.0002
[Sat Sep 24 18:18:16 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:18:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:18:16 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:18:16 2011] Source does appear to be extended
[Sat Sep 24 18:18:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 18:20:14 2011] Not overwriting source region fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_src.reg
[Sat Sep 24 18:20:14 2011] Extracting stamp from image fullrun_ccd1_acisf03482_pi14-548_cl_sm2.00.img.gz, (19, 613) - (233, 827)
[Sat Sep 24 18:20:14 2011] Writing fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2.gif
[Sat Sep 24 18:20:24 2011] ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_src.evt and ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Sep 24 18:20:24 2011] Size of ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_src.evt.gz[events] = 97 counts
[Sat Sep 24 18:20:24 2011] Mean chipx,y = (121.64, 71.51)
[Sat Sep 24 18:20:24 2011] Mean tdetx,y = (5060.49, 4228.64)
[Sat Sep 24 18:20:24 2011] chipx,y range = (93.00-148.00, 45.00-100.00)
[Sat Sep 24 18:20:24 2011] Size of ../../acisf03482/products/events/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 184 counts
[Sat Sep 24 18:20:24 2011] ../../acisf03482/products/images/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_src.img and ../../acisf03482/products/images/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Sep 24 18:20:24 2011] ../../acisf03482/products/spectra/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_src.pi and ../../acisf03482/products/spectra/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Sep 24 18:20:24 2011] Not generating rmf since there are only 79 counts
[Sat Sep 24 18:20:28 2011] ../../acisf03482/products/lightcurves/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_src.lc and ../../acisf03482/products/lightcurves/fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Sep 24 18:21:27 2011] 178.925
[Sat Sep 24 18:24:48 2011] Updating aperture counts using extracted products
[Sat Sep 24 18:24:48 2011] Error reading totcts from fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Sep 24 18:24:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 18:24:48 2011] Using photon index=1.80, rate=0.00137, arf fullrun_ccd1_acisf03482_pi14-548_pass1_cl_src2.arf
[Sat Sep 24 18:24:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 18:24:48 2011] Updating source flux to 1.7e-14
[Sat Sep 24 18:24:58 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting