[Sat Oct 15 19:41:14 2011] Detection parameters:
  Position = (600.7, 558.9) = 12 10 44.07 39 22 37.0
  Extent = 0.7" x 0.5", rotation angle = 161 degrees
  Source counts = 23.7 +/- 5.1
  Background counts = 2.3
  Rate = 0.0009 +/- 0.0002

[Sat Oct 15 19:41:17 2011] Off-axis axis estimate = 3.41'
[Sat Oct 15 19:42:12 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:42:12 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sat Oct 15 19:42:12 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.151
[Sat Oct 15 19:42:12 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.67"
[Sat Oct 15 19:42:14 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src19.ximg exists
[Sat Oct 15 19:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src19.csv
[Sat Oct 15 19:42:14 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src19_1.ximg exists
[Sat Oct 15 19:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src19.csv
[Sat Oct 15 19:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:42:15 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sat Oct 15 19:42:15 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Oct 15 19:42:15 2011] Fit fullrun_ccd7_acisf00348_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Oct 15 19:42:30 2011] Spatial fit model total counts = 29.898800, observed total counts = 30.000000
[Sat Oct 15 19:42:30 2011] Offset between fit and detection position for source 8 = 0.952234 pixels
[Sat Oct 15 19:42:30 2011] 29.819590 total counts/ 7.033290 bgd. counts: snr = 8.592006
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.952234 pixels
  Position = (601.6, 559.2) = 12 10 44.05 39 22 36.9
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 22.8 +/- 5.5
  Background counts = 7.0
  Rate = 0.0008 +/- 0.0002
[Sat Oct 15 19:42:30 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:42:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:42:30 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:42:30 2011] Source does appear to be extended
[Sat Oct 15 19:42:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:42:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:42:52 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Oct 15 19:42:52 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.037
[Sat Oct 15 19:42:52 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.72"
[Sat Oct 15 19:42:55 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src19.ximg exists
[Sat Oct 15 19:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src19.csv
[Sat Oct 15 19:42:55 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src19_1.ximg exists
[Sat Oct 15 19:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src19.csv
[Sat Oct 15 19:42:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:42:57 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sat Oct 15 19:42:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src19.csv
[Sat Oct 15 19:42:57 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Oct 15 19:42:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src19.csv
[Sat Oct 15 19:42:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:43:12 2011] Warning, spatial fit 19 centroid is now closest to src. 35
[Sat Oct 15 19:43:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:43:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:43:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:43:12 2011] Source does appear to be extended
[Sat Oct 15 19:43:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:45:22 2011] Not overwriting source region fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_src.reg
[Sat Oct 15 19:45:22 2011] Extracting stamp from image fullrun_ccd7_acisf00348_pi14-548_cl_sm2.00.img.gz, (569, 526) - (635, 592)
[Sat Oct 15 19:45:22 2011] Writing fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8.gif
[Sat Oct 15 19:46:15 2011] ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_src.evt and ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Oct 15 19:46:15 2011] Size of ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_src.evt.gz[events] = 27 counts
[Sat Oct 15 19:46:15 2011] Mean chipx,y = (623.67, 436.44)
[Sat Oct 15 19:46:15 2011] Mean tdetx,y = (4540.67, 2138.44)
[Sat Oct 15 19:46:15 2011] chipx,y range = (607.00-645.00, 414.00-453.00)
[Sat Oct 15 19:46:15 2011] Size of ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 30 counts
[Sat Oct 15 19:46:15 2011] ../../acisf00348/products/images/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_src.img and ../../acisf00348/products/images/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Oct 15 19:46:15 2011] ../../acisf00348/products/spectra/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_src.pi and ../../acisf00348/products/spectra/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sat Oct 15 19:46:15 2011] Not generating rmf since there are only 22 counts
[Sat Oct 15 19:46:18 2011] ../../acisf00348/products/lightcurves/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_src.lc and ../../acisf00348/products/lightcurves/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Oct 15 19:47:08 2011] 237.725
[Sat Oct 15 19:47:13 2011] Updating aperture counts using extracted products
[Sat Oct 15 19:47:13 2011] Error reading totcts from fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8_src.pi.gz
[Sat Oct 15 19:47:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 19:47:13 2011] Using photon index=1.80, rate=0.000844, arf fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src8.arf
[Sat Oct 15 19:47:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 19:47:13 2011] Updating source flux to 4.7e-15
[Sat Oct 15 19:47:35 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting