[Sat Oct 15 19:41:15 2011] Detection parameters:
  Position = (1060.3, 354.6) = 12 10 24.57 39 20 56.5
  Extent = 0.7" x 0.5", rotation angle = 141 degrees
  Source counts = 13.5 +/- 3.9
  Background counts = 1.5
  Rate = 0.0005 +/- 0.0001

[Sat Oct 15 19:41:17 2011] Off-axis axis estimate = 3.89'
[Sat Oct 15 19:42:12 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:42:12 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Sat Oct 15 19:42:12 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Sat Oct 15 19:42:12 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 0.80"
[Sat Oct 15 19:42:14 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src32.ximg exists
[Sat Oct 15 19:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src32.csv
[Sat Oct 15 19:42:14 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src32_1.ximg exists
[Sat Oct 15 19:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src32.csv
[Sat Oct 15 19:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00348_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:42:15 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Sat Oct 15 19:42:15 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Sat Oct 15 19:42:15 2011] Fit fullrun_ccd7_acisf00348_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Sat Oct 15 19:42:30 2011] Spatial fit model total counts = 25.375500, observed total counts = 26.000000
[Sat Oct 15 19:42:30 2011] Offset between fit and detection position for source 28 = 0.787841 pixels
[Sat Oct 15 19:42:30 2011] 25.076900 total counts/ 12.778000 bgd. counts: snr = 3.440605
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.787841 pixels
  Position = (1060.7, 355.3) = 12 10 24.57 39 20 56.6
  Extent = 0.7 (0.5-1.5)", rotation angle = 0
  Source counts = 12.3 +/- 5.0
  Background counts = 12.8
  Rate = 0.0005 +/- 0.0002
[Sat Oct 15 19:42:30 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:42:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:42:30 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:42:30 2011] Source does appear to be extended
[Sat Oct 15 19:42:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:42:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:42:52 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Sat Oct 15 19:42:52 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.023
[Sat Oct 15 19:42:52 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.73"
[Sat Oct 15 19:42:55 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src30.ximg exists
[Sat Oct 15 19:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src30.csv
[Sat Oct 15 19:42:55 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src30_1.ximg exists
[Sat Oct 15 19:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src30.csv
[Sat Oct 15 19:42:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00348_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:42:57 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Sat Oct 15 19:42:57 2011] fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Oct 15 19:42:57 2011] Fit fullrun_ccd7_acisf00348_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Oct 15 19:43:12 2011] Source 28 is offset by -1.821730 and 5.190118 pixels which is larger than
2 X fitted extent = 1.023837 x 1.023837, not incorporating fit results
[Sat Oct 15 19:43:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:43:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:43:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:43:12 2011] Source does appear to be extended
[Sat Oct 15 19:43:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:45:23 2011] Not overwriting source region fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_src.reg
[Sat Oct 15 19:45:23 2011] Extracting stamp from image fullrun_ccd7_acisf00348_pi14-548_cl_sm2.00.img.gz, (1028, 322) - (1094, 389)
[Sat Oct 15 19:45:23 2011] Writing fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28.gif
[Sat Oct 15 19:46:45 2011] ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_src.evt and ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sat Oct 15 19:46:45 2011] Size of ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_src.evt.gz[events] = 17 counts
[Sat Oct 15 19:46:45 2011] Mean chipx,y = (285.47, 58.94)
[Sat Oct 15 19:46:45 2011] Mean tdetx,y = (4202.47, 1760.94)
[Sat Oct 15 19:46:45 2011] chipx,y range = (273.00-307.00, 40.00-75.00)
[Sat Oct 15 19:46:45 2011] Size of ../../acisf00348/products/events/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 25 counts
[Sat Oct 15 19:46:45 2011] ../../acisf00348/products/images/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_src.img and ../../acisf00348/products/images/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Sat Oct 15 19:46:45 2011] ../../acisf00348/products/spectra/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_src.pi and ../../acisf00348/products/spectra/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sat Oct 15 19:46:45 2011] Not generating rmf since there are only 12 counts
[Sat Oct 15 19:46:48 2011] ../../acisf00348/products/lightcurves/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_src.lc and ../../acisf00348/products/lightcurves/fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sat Oct 15 19:47:09 2011] 235.077
[Sat Oct 15 19:47:13 2011] Updating aperture counts using extracted products
[Sat Oct 15 19:47:13 2011] Error reading totcts from fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28_src.pi.gz
[Sat Oct 15 19:47:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 19:47:13 2011] Using photon index=1.80, rate=0.000456, arf fullrun_ccd7_acisf00348_pi14-548_pass1_cl_src28.arf
[Sat Oct 15 19:47:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 19:47:13 2011] Updating source flux to 2.8e-15
[Sat Oct 15 19:47:35 2011] Flag b found in src. 28 procflags, skipping spectral fitting
[Sat Oct 15 19:47:35 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting