[Sat Oct 15 19:41:10 2011] Detection parameters:
  Position = (1168.0, 440.0) = 12 10 51.86 39 31 6.6
  Extent = 2.2" x 1.5", rotation angle = 102 degrees
  Source counts = 46.1 +/- 7.1
  Background counts = 4.9
  Rate = 0.002 +/- 0.0003

[Sat Oct 15 19:41:10 2011] Off-axis axis estimate = 7.69'
[Sat Oct 15 19:42:09 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:42:09 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Sat Oct 15 19:42:09 2011] source mask rpix=5.3, npix_max = 135, mask sum = 144, frac = 1.064
[Sat Oct 15 19:42:09 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.62"
[Sat Oct 15 19:42:10 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 15 19:42:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00348_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 19:42:10 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 15 19:42:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00348_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 19:42:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00348_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00348_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:42:10 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 15 19:42:10 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 15 19:42:10 2011] Fit fullrun_ccd3_acisf00348_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 15 19:42:22 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 30.084347 pixels away
[Sat Oct 15 19:42:22 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:42:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:42:22 2011] Assessing source extent using major
[Sat Oct 15 19:42:22 2011] Source does appear to be extended
[Sat Oct 15 19:42:22 2011] Computing asymmetry using major and minor axis, asym = 1.53
[Sat Oct 15 19:42:22 2011] Source is asymmetric
[Sat Oct 15 19:42:50 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:42:50 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Sat Oct 15 19:42:50 2011] source mask rpix=5.3, npix_max = 135, mask sum = 144, frac = 1.064
[Sat Oct 15 19:42:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.62"
[Sat Oct 15 19:42:50 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 15 19:42:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00348_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 19:42:50 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 15 19:42:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00348_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 19:42:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00348_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00348_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:42:51 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 15 19:42:51 2011] fullrun_ccd3_acisf00348_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 15 19:42:51 2011] Fit fullrun_ccd3_acisf00348_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 15 19:43:04 2011] Spatial fit model total counts = 55.925400, observed total counts = 56.000000
[Sat Oct 15 19:43:04 2011] Offset between fit and detection position for source 10 = 1.608018 pixels
[Sat Oct 15 19:43:04 2011] 55.442190 total counts/ 9.170290 bgd. counts: snr = 15.280086
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.608018 pixels
  Position = (1169.2, 441.0) = 12 10 51.83 39 31 6.9
  Extent = 2.5 (1.5-3.4)", rotation angle = 0
  Source counts = 46.3 +/- 7.4
  Background counts = 9.2
  Rate = 0.002 +/- 0.0003
[Sat Oct 15 19:43:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 19:43:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 19:43:04 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 19:43:04 2011] Source does appear to be extended
[Sat Oct 15 19:43:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:43:49 2011] Not overwriting source region fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_src.reg
[Sat Oct 15 19:43:49 2011] Extracting stamp from image fullrun_ccd3_acisf00348_pi14-548_cl_sm2.00.img.gz, (1056, 328) - (1283, 555)
[Sat Oct 15 19:43:49 2011] Writing fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10.gif
[Sat Oct 15 19:43:55 2011] ../../acisf00348/products/events/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_src.evt and ../../acisf00348/products/events/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Oct 15 19:43:55 2011] Size of ../../acisf00348/products/events/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_src.evt.gz[events] = 62 counts
[Sat Oct 15 19:43:55 2011] Mean chipx,y = (93.45, 849.58)
[Sat Oct 15 19:43:55 2011] Mean tdetx,y = (4282.42, 3154.45)
[Sat Oct 15 19:43:55 2011] chipx,y range = (60.00-129.00, 822.00-872.00)
[Sat Oct 15 19:43:55 2011] Size of ../../acisf00348/products/events/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 88 counts
[Sat Oct 15 19:43:55 2011] ../../acisf00348/products/images/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_src.img and ../../acisf00348/products/images/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Oct 15 19:43:55 2011] ../../acisf00348/products/spectra/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_src.pi and ../../acisf00348/products/spectra/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Oct 15 19:43:55 2011] Not generating rmf since there are only 46 counts
[Sat Oct 15 19:43:59 2011] ../../acisf00348/products/lightcurves/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_src.lc and ../../acisf00348/products/lightcurves/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Oct 15 19:44:19 2011] 179.291
[Sat Oct 15 19:47:12 2011] Updating aperture counts using extracted products
[Sat Oct 15 19:47:12 2011] Error reading totcts from fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Oct 15 19:47:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 19:47:12 2011] Using photon index=1.80, rate=0.00167, arf fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10.arf
[Sat Oct 15 19:47:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 19:47:12 2011] Updating source flux to 1.9e-14
[Sat Oct 15 19:47:19 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 19:47:20 2011] acisf00348/analysis//spectral/fullrun_ccd3_acisf00348_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete