[Fri Oct 21 10:19:05 2011] Detection parameters:
  Position = (981.4, 1196.3) = 16 17 42.32 -83 37 51.7
  Extent = 0.5" x 0.5", rotation angle = 136 degrees
  Source counts = 87.1 +/- 9.9
  Background counts = 10.9
  Rate = 0.004 +/- 0.0005

[Fri Oct 21 10:19:06 2011] Off-axis axis estimate = 9.64'
[Fri Oct 21 10:19:44 2011] Using EEF radius (= 4.12 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:19:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 10:19:44 2011] Initial guess for spatial extent in simple fitting = 4.12"
[Fri Oct 21 10:19:44 2011] source mask rpix=8.4, npix_max = 314, mask sum = 158, frac = 0.503
[Fri Oct 21 10:19:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.12"
[Fri Oct 21 10:19:45 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 10:19:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03477_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 10:19:45 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 10:19:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03477_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 10:19:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03477_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03477_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:19:45 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 10:19:45 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 10:19:45 2011] Fit fullrun_ccd2_acisf03477_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 10:19:50 2011] Spatial fit model total counts = 474.092000, observed total counts = 445.000000
[Fri Oct 21 10:19:50 2011] Offset between fit and detection position for source 1 = 1.471433 pixels
[Fri Oct 21 10:19:50 2011] 473.047900 total counts/ 23.325900 bgd. counts: snr = 93.116132
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.471433 pixels
  Position = (980.0, 1196.7) = 16 17 42.89 -83 37 51.7
  Extent = 3.9 (3.4-4.4)", rotation angle = 0
  Source counts = 449.7 +/- 21.7
  Background counts = 23.3
  Rate = 0.02 +/- 0.001
[Fri Oct 21 10:19:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:19:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:19:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:19:50 2011] Source does appear to be extended
[Fri Oct 21 10:19:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:20:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:20:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 10:20:06 2011] Initial guess for spatial extent in simple fitting = 3.94"
[Fri Oct 21 10:20:06 2011] source mask rpix=8.0, npix_max = 289, mask sum = 170, frac = 0.586
[Fri Oct 21 10:20:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.94"
[Fri Oct 21 10:20:06 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 10:20:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03477_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 10:20:06 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 10:20:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03477_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 10:20:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03477_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03477_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:20:06 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 10:20:06 2011] fullrun_ccd2_acisf03477_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 10:20:06 2011] Fit fullrun_ccd2_acisf03477_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 10:20:13 2011] Spatial fit model total counts = 474.455000, observed total counts = 445.000000
[Fri Oct 21 10:20:13 2011] Offset between fit and detection position for source 1 = 0.241897 pixels
[Fri Oct 21 10:20:13 2011] 473.452700 total counts/ 34.103700 bgd. counts: snr = 75.233089
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.241897 pixels
  Position = (979.7, 1196.7) = 16 17 42.96 -83 37 51.7
  Extent = 3.8 (3.3-4.4)", rotation angle = 0
  Source counts = 439.3 +/- 21.8
  Background counts = 34.1
  Rate = 0.02 +/- 0.001
[Fri Oct 21 10:20:13 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:20:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:20:13 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:20:13 2011] Source does appear to be extended
[Fri Oct 21 10:20:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:20:30 2011] Not overwriting source region fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 10:20:30 2011] Extracting stamp from image fullrun_ccd2_acisf03477_pi14-548_cl_sm2.00.img.gz, (805, 1022) - (1155, 1372)
[Fri Oct 21 10:20:30 2011] Writing fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 10:20:31 2011] ../../acisf03477/products/events/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_src.evt and ../../acisf03477/products/events/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 10:20:31 2011] Size of ../../acisf03477/products/events/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_src.evt.gz[events] = 439 counts
[Fri Oct 21 10:20:31 2011] Mean chipx,y = (1009.08, 247.53)
[Fri Oct 21 10:20:31 2011] Mean tdetx,y = (3308.53, 3076.92)
[Fri Oct 21 10:20:31 2011] chipx,y range = (978.00-1023.00, 212.00-288.00)
[Fri Oct 21 10:20:31 2011] Size of ../../acisf03477/products/events/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 79 counts
[Fri Oct 21 10:20:31 2011] ../../acisf03477/products/images/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_src.img and ../../acisf03477/products/images/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 10:20:31 2011] ../../acisf03477/products/spectra/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_src.pi and ../../acisf03477/products/spectra/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 10:20:33 2011] ../../acisf03477/products/lightcurves/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_src.lc and ../../acisf03477/products/lightcurves/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 10:20:43 2011] Keeping rmf generated by specextract
[Fri Oct 21 10:20:43 2011] 166.802
[Fri Oct 21 10:22:21 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:22:21 2011] Error reading totcts from fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 10:22:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:22:21 2011] Using photon index=1.80, rate=0.0222, arf fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 10:22:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:22:21 2011] Updating source flux to 2.9e-13
[Fri Oct 21 10:22:30 2011] Reading fit data from acisf03477/analysis//spectral/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 10:22:30 2011] Spectral fit parameter nH value = 1.0648e+15
[Fri Oct 21 10:22:30 2011] Spectral fit parameter PhoIndex value = 2.54798
[Fri Oct 21 10:22:30 2011] Failed to get F(0.3-8.0) from acisf03477/analysis//spectral/fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 10:22:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:22:30 2011] Using Nh = 1.1e+15, photon index=2.55, rate=0.0222, arf fullrun_ccd2_acisf03477_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 10:22:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:22:30 2011] Updating source flux to 3.2e-13