[Wed Sep 21 04:49:19 2011] Detection parameters:
  Position = (299.6, 671.1) = 17 45 32.34 -29 2 51.3
  Extent = 0.5" x 0.5", rotation angle = 43 degrees
  Source counts = 115.6 +/- 12.0
  Background counts = 28.4
  Rate = 0.0007 +/- 8e-05

[Wed Sep 21 04:49:54 2011] Off-axis axis estimate = 3.20'
[Wed Sep 21 04:54:41 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:54:41 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Sep 21 04:54:41 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.965
[Wed Sep 21 04:54:41 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.62"
[Wed Sep 21 04:54:42 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src30.ximg exists
[Wed Sep 21 04:54:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src30.csv
[Wed Sep 21 04:54:42 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src30_1.ximg exists
[Wed Sep 21 04:54:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src30.csv
[Wed Sep 21 04:54:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:54:44 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Wed Sep 21 04:54:44 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Sep 21 04:54:44 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Sep 21 04:56:01 2011] Spatial fit model total counts = 157.846000, observed total counts = 158.000000
[Wed Sep 21 04:56:01 2011] Offset between fit and detection position for source 40 = 0.614299 pixels
[Wed Sep 21 04:56:01 2011] 157.541100 total counts/ 56.797100 bgd. counts: snr = 13.367682
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.614299 pixels
  Position = (300.1, 671.5) = 17 45 32.34 -29 2 51.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 100.7 +/- 12.6
  Background counts = 56.8
  Rate = 0.0006 +/- 8e-05
[Wed Sep 21 04:56:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:56:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:56:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:56:01 2011] Source does appear to be extended
[Wed Sep 21 04:56:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 04:57:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:57:21 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Sep 21 04:57:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.083
[Wed Sep 21 04:57:21 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.57"
[Wed Sep 21 04:57:22 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src30.ximg exists
[Wed Sep 21 04:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src30.csv
[Wed Sep 21 04:57:22 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src30_1.ximg exists
[Wed Sep 21 04:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src30.csv
[Wed Sep 21 04:57:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:57:23 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Wed Sep 21 04:57:23 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Sep 21 04:57:23 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Sep 21 04:58:42 2011] Spatial fit model total counts = 163.967000, observed total counts = 164.000000
[Wed Sep 21 04:58:42 2011] Offset between fit and detection position for source 40 = 0.011094 pixels
[Wed Sep 21 04:58:42 2011] 164.326900 total counts/ 64.686700 bgd. counts: snr = 12.388739
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.011094 pixels
  Position = (300.1, 671.5) = 17 45 32.33 -29 2 51.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 99.6 +/- 12.8
  Background counts = 64.7
  Rate = 0.0006 +/- 8e-05
[Wed Sep 21 04:58:42 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:58:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:58:42 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:58:42 2011] Source does appear to be extended
[Wed Sep 21 04:58:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 05:21:23 2011] Not overwriting source region fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_src.reg
[Wed Sep 21 05:21:23 2011] Extracting stamp from image fullrun_ccd3_acisf03393_pi14-548_cl_sm2.00.img.gz, (274, 646) - (326, 697)
[Wed Sep 21 05:21:23 2011] Writing fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40.gif
[Wed Sep 21 05:23:01 2011] ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_src.evt and ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Wed Sep 21 05:23:01 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_src.evt.gz[events] = 116 counts
[Wed Sep 21 05:23:01 2011] Mean chipx,y = (836.59, 630.30)
[Wed Sep 21 05:23:01 2011] Mean tdetx,y = (4501.70, 3897.59)
[Wed Sep 21 05:23:01 2011] chipx,y range = (816.00-855.00, 611.00-650.00)
[Wed Sep 21 05:23:01 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 139 counts
[Wed Sep 21 05:23:01 2011] ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_src.img and ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Wed Sep 21 05:23:01 2011] ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_src.pi and ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Wed Sep 21 05:23:01 2011] Not generating rmf since there are only 99 counts
[Wed Sep 21 05:23:04 2011] ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_src.lc and ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Wed Sep 21 05:29:47 2011] 199.85
[Wed Sep 21 05:30:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 05:30:35 2011] Error reading totcts from fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40_src.pi.gz
[Wed Sep 21 05:30:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 05:30:37 2011] Using photon index=1.80, rate=0.000631, arf fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src40.arf
[Wed Sep 21 05:30:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 05:30:37 2011] Updating source flux to 9.7e-15
[Wed Sep 21 05:34:33 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting