[Wed Sep 21 04:49:43 2011] Detection parameters:
  Position = (614.6, 407.2) = 17 45 20.51 -29 5 1.0
  Extent = 1.8" x 1.5", rotation angle = 72 degrees
  Source counts = 57.1 +/- 10.2
  Background counts = 46.9
  Rate = 0.0004 +/- 6e-05

[Wed Sep 21 04:49:54 2011] Off-axis axis estimate = 6.51'
[Wed Sep 21 04:54:41 2011] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:54:41 2011] Initial guess for spatial extent in simple fitting = 1.90"
[Wed Sep 21 04:54:41 2011] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.065
[Wed Sep 21 04:54:41 2011] Giving source the simple spatial ID 69 for pass 0, mean size = 1.90"
[Wed Sep 21 04:54:43 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src69.ximg exists
[Wed Sep 21 04:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src69.csv
[Wed Sep 21 04:54:43 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src69_1.ximg exists
[Wed Sep 21 04:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src69.csv
[Wed Sep 21 04:54:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:54:46 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src69.ximg exists
[Wed Sep 21 04:54:46 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src69_1.ximg exists
[Wed Sep 21 04:54:46 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src69 appears to have run properly
[Wed Sep 21 04:56:01 2011] Spatial fit model total counts = 118.998000, observed total counts = 119.000000
[Wed Sep 21 04:56:01 2011] Offset between fit and detection position for source 223 = 0.799934 pixels
[Wed Sep 21 04:56:01 2011] 120.031700 total counts/ 45.820700 bgd. counts: snr = 10.963202
Spatial fit parameters:
  Offset between fit and detection position for source 223 = 0.799934 pixels
  Position = (615.0, 406.6) = 17 45 20.51 -29 5 1.6
  Extent = 2.1 (1.1-3.3)", rotation angle = 0
  Source counts = 74.2 +/- 11.0
  Background counts = 45.8
  Rate = 0.0005 +/- 7e-05
[Wed Sep 21 04:56:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:56:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:56:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:56:01 2011] Source does appear to be extended
[Wed Sep 21 04:56:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 04:57:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:57:21 2011] Initial guess for spatial extent in simple fitting = 2.08"
[Wed Sep 21 04:57:21 2011] source mask rpix=4.2, npix_max = 89, mask sum = 90, frac = 1.009
[Wed Sep 21 04:57:21 2011] Giving source the simple spatial ID 68 for pass 1, mean size = 2.08"
[Wed Sep 21 04:57:22 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src68.ximg exists
[Wed Sep 21 04:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src68.csv
[Wed Sep 21 04:57:22 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src68_1.ximg exists
[Wed Sep 21 04:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src68.csv
[Wed Sep 21 04:57:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:57:26 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src68.ximg exists
[Wed Sep 21 04:57:26 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src68_1.ximg exists
[Wed Sep 21 04:57:26 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src68 appears to have run properly
[Wed Sep 21 04:58:42 2011] Warning, spatial fit 68 centroid is now closest to src. 224
[Wed Sep 21 04:58:42 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:58:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:58:42 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:58:42 2011] Source does appear to be extended
[Wed Sep 21 04:58:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 05:21:24 2011] Not overwriting source region fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_src.reg
[Wed Sep 21 05:21:24 2011] Extracting stamp from image fullrun_ccd3_acisf03393_pi14-548_cl_sm2.00.img.gz, (520, 312) - (710, 502)
[Wed Sep 21 05:21:24 2011] Writing fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223.gif
[Wed Sep 21 05:25:11 2011] ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_src.evt and ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_bgd.evt exist, delete to re-create
[Wed Sep 21 05:25:11 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_src.evt.gz[events] = 173 counts
[Wed Sep 21 05:25:11 2011] Mean chipx,y = (594.65, 293.35)
[Wed Sep 21 05:25:11 2011] Mean tdetx,y = (4838.65, 3655.65)
[Wed Sep 21 05:25:11 2011] chipx,y range = (568.00-626.00, 262.00-323.00)
[Wed Sep 21 05:25:11 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_bgd.evt.gz[events] = 1314 counts
[Wed Sep 21 05:25:11 2011] ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_src.img and ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_bgd.img exist, delete to re-create
[Wed Sep 21 05:25:11 2011] ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_src.pi and ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_bgd.pi exist, delete to re-create
[Wed Sep 21 05:25:11 2011] Not generating rmf since there are only 74 counts
[Wed Sep 21 05:25:14 2011] ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_src.lc and ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_bgd.lc exist, delete to re-create
[Wed Sep 21 05:29:49 2011] 182.629
[Wed Sep 21 05:30:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 05:30:35 2011] Error reading totcts from fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223_src.pi.gz
[Wed Sep 21 05:30:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 05:30:38 2011] Using photon index=1.80, rate=0.00047, arf fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src223.arf
[Wed Sep 21 05:30:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 05:30:38 2011] Updating source flux to 7.8e-15
[Wed Sep 21 05:34:33 2011] Source 223 has fewer than 100.000000 counts, skipping spectral fitting