[Wed Sep 21 04:49:38 2011] Detection parameters:
  Position = (210.3, 1009.7) = 17 45 35.69 -29 0 4.7
  Extent = 0.6" x 0.5", rotation angle = 144 degrees
  Source counts = 76.6 +/- 12.1
  Background counts = 69.4
  Rate = 0.0005 +/- 8e-05

[Wed Sep 21 04:49:54 2011] Off-axis axis estimate = 1.12'
[Wed Sep 21 04:54:41 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:54:41 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Sep 21 04:54:41 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.387
[Wed Sep 21 04:54:41 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 0.38"
[Wed Sep 21 04:54:43 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src51.ximg exists
[Wed Sep 21 04:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src51.csv
[Wed Sep 21 04:54:43 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src51_1.ximg exists
[Wed Sep 21 04:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src51.csv
[Wed Sep 21 04:54:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:54:45 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Wed Sep 21 04:54:45 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Sep 21 04:54:45 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Wed Sep 21 04:56:01 2011] Spatial fit model total counts = 220.000000, observed total counts = 220.000000
[Wed Sep 21 04:56:01 2011] Offset between fit and detection position for source 190 = 1.643835 pixels
[Wed Sep 21 04:56:01 2011] 221.223600 total counts/ 146.031000 bgd. counts: snr = 6.222323
Spatial fit parameters:
  Offset between fit and detection position for source 190 = 1.643835 pixels
  Position = (209.4, 1011.0) = 17 45 35.74 -29 0 4.3
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 75.2 +/- 14.9
  Background counts = 146.0
  Rate = 0.0005 +/- 9e-05
[Wed Sep 21 04:56:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:56:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:56:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:56:01 2011] Source does appear to be extended
[Wed Sep 21 04:56:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 04:57:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:57:21 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Sep 21 04:57:21 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.124
[Wed Sep 21 04:57:21 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 1.02"
[Wed Sep 21 04:57:22 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src50.ximg exists
[Wed Sep 21 04:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src50.csv
[Wed Sep 21 04:57:22 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src50_1.ximg exists
[Wed Sep 21 04:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src50.csv
[Wed Sep 21 04:57:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:57:25 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Wed Sep 21 04:57:25 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Sep 21 04:57:25 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src50 appears to have run properly
[Wed Sep 21 04:58:42 2011] Spatial fit model total counts = 233.990000, observed total counts = 234.000000
[Wed Sep 21 04:58:42 2011] Offset between fit and detection position for source 190 = 0.309734 pixels
[Wed Sep 21 04:58:42 2011] 235.290700 total counts/ 184.297000 bgd. counts: snr = 3.756275
Spatial fit parameters:
  Offset between fit and detection position for source 190 = 0.309734 pixels
  Position = (209.1, 1011.0) = 17 45 35.75 -29 0 4.3
  Extent = 0.7 (0.4-1.2)", rotation angle = 0
  Source counts = 51.0 +/- 15.3
  Background counts = 184.3
  Rate = 0.0003 +/- 0.0001
[Wed Sep 21 04:58:42 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:58:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:58:42 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:58:42 2011] Source does appear to be extended
[Wed Sep 21 04:58:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 05:21:24 2011] Not overwriting source region fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_src.reg
[Wed Sep 21 05:21:24 2011] Extracting stamp from image fullrun_ccd3_acisf03393_pi14-548_cl_sm2.00.img.gz, (177, 979) - (241, 1043)
[Wed Sep 21 05:21:24 2011] Writing fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190.gif
[Wed Sep 21 05:24:07 2011] ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_src.evt and ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_bgd.evt exist, delete to re-create
[Wed Sep 21 05:24:07 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_src.evt.gz[events] = 137 counts
[Wed Sep 21 05:24:07 2011] Mean chipx,y = (838.23, 983.58)
[Wed Sep 21 05:24:07 2011] Mean tdetx,y = (4148.42, 3899.23)
[Wed Sep 21 05:24:07 2011] chipx,y range = (818.00-859.00, 963.00-1007.00)
[Wed Sep 21 05:24:08 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_bgd.evt.gz[events] = 600 counts
[Wed Sep 21 05:24:08 2011] ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_src.img and ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_bgd.img exist, delete to re-create
[Wed Sep 21 05:24:08 2011] ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_src.pi and ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_bgd.pi exist, delete to re-create
[Wed Sep 21 05:24:08 2011] Not generating rmf since there are only 50 counts
[Wed Sep 21 05:24:10 2011] ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_src.lc and ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_bgd.lc exist, delete to re-create
[Wed Sep 21 05:29:48 2011] 203.323
[Wed Sep 21 05:30:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 05:30:35 2011] Error reading totcts from fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190_src.pi.gz
[Wed Sep 21 05:30:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 05:30:37 2011] Using photon index=1.80, rate=0.000323, arf fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src190.arf
[Wed Sep 21 05:30:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 05:30:37 2011] Updating source flux to 4.9e-15
[Wed Sep 21 05:34:33 2011] Source 190 has fewer than 100.000000 counts, skipping spectral fitting