[Wed Sep 21 04:49:35 2011] Detection parameters:
  Position = (147.1, 974.1) = 17 45 38.06 -29 0 22.2
  Extent = 0.5" x 0.5", rotation angle = 96 degrees
  Source counts = 214.7 +/- 17.0
  Background counts = 75.3
  Rate = 0.001 +/- 0.0001

[Wed Sep 21 04:49:54 2011] Off-axis axis estimate = 0.61'
[Wed Sep 21 04:54:41 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:54:41 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Sep 21 04:54:41 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.603
[Wed Sep 21 04:54:41 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.39"
[Wed Sep 21 04:54:42 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src14.ximg exists
[Wed Sep 21 04:54:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src14.csv
[Wed Sep 21 04:54:42 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src14_1.ximg exists
[Wed Sep 21 04:54:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src14.csv
[Wed Sep 21 04:54:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:54:44 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Wed Sep 21 04:54:44 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Sep 21 04:54:44 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Sep 21 04:56:01 2011] Spatial fit model total counts = 521.533000, observed total counts = 520.000000
[Wed Sep 21 04:56:01 2011] Offset between fit and detection position for source 167 = 0.564225 pixels
[Wed Sep 21 04:56:01 2011] 526.941000 total counts/ 306.237000 bgd. counts: snr = 12.611925
Spatial fit parameters:
  Offset between fit and detection position for source 167 = 0.564225 pixels
  Position = (147.5, 974.5) = 17 45 38.06 -29 0 22.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 220.7 +/- 23.0
  Background counts = 306.2
  Rate = 0.001 +/- 0.0001
[Wed Sep 21 04:56:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:56:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:56:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:56:01 2011] Source does appear to be extended
[Wed Sep 21 04:56:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 04:57:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:57:21 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Sep 21 04:57:21 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.172
[Wed Sep 21 04:57:21 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.44"
[Wed Sep 21 04:57:21 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src14.ximg exists
[Wed Sep 21 04:57:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src14.csv
[Wed Sep 21 04:57:21 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src14_1.ximg exists
[Wed Sep 21 04:57:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src14.csv
[Wed Sep 21 04:57:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03393_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:57:23 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Wed Sep 21 04:57:23 2011] fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Sep 21 04:57:23 2011] Fit fullrun_ccd3_acisf03393_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Sep 21 04:58:42 2011] Spatial fit model total counts = 517.983000, observed total counts = 520.000000
[Wed Sep 21 04:58:42 2011] Offset between fit and detection position for source 167 = 0.005629 pixels
[Wed Sep 21 04:58:42 2011] 523.331000 total counts/ 305.672000 bgd. counts: snr = 12.449411
Spatial fit parameters:
  Offset between fit and detection position for source 167 = 0.005629 pixels
  Position = (147.5, 974.5) = 17 45 38.06 -29 0 22.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 217.7 +/- 22.9
  Background counts = 305.7
  Rate = 0.001 +/- 0.0001
[Wed Sep 21 04:58:42 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:58:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:58:42 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:58:42 2011] Source does appear to be extended
[Wed Sep 21 04:58:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 05:21:23 2011] Not overwriting source region fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_src.reg
[Wed Sep 21 05:21:23 2011] Extracting stamp from image fullrun_ccd3_acisf03393_pi14-548_cl_sm2.00.img.gz, (128, 954) - (168, 995)
[Wed Sep 21 05:21:23 2011] Writing fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167.gif
[Wed Sep 21 05:22:12 2011] ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_src.evt and ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_bgd.evt exist, delete to re-create
[Wed Sep 21 05:22:12 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_src.evt.gz[events] = 268 counts
[Wed Sep 21 05:22:12 2011] Mean chipx,y = (905.24, 964.90)
[Wed Sep 21 05:22:12 2011] Mean tdetx,y = (4167.10, 3966.24)
[Wed Sep 21 05:22:12 2011] chipx,y range = (888.00-924.00, 943.00-984.00)
[Wed Sep 21 05:22:12 2011] Size of ../../acisf03393/products/events/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_bgd.evt.gz[events] = 392 counts
[Wed Sep 21 05:22:12 2011] ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_src.img and ../../acisf03393/products/images/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_bgd.img exist, delete to re-create
[Wed Sep 21 05:22:12 2011] ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_src.pi and ../../acisf03393/products/spectra/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_bgd.pi exist, delete to re-create
[Wed Sep 21 05:22:15 2011] ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_src.lc and ../../acisf03393/products/lightcurves/fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_bgd.lc exist, delete to re-create
[Wed Sep 21 05:29:47 2011] Keeping rmf generated by specextract
[Wed Sep 21 05:29:47 2011] 205.241
[Wed Sep 21 05:30:34 2011] Updating aperture counts using extracted products
[Wed Sep 21 05:30:34 2011] Error reading totcts from fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167_src.pi.gz
[Wed Sep 21 05:30:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 05:30:37 2011] Using photon index=1.80, rate=0.00138, arf fullrun_ccd3_acisf03393_pi14-548_pass1_cl_src167.arf
[Wed Sep 21 05:30:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 05:30:37 2011] Updating source flux to 2.1e-14