[Wed Sep 21 04:48:53 2011] Detection parameters:
  Position = (518.7, 123.9) = 17 45 33.69 -28 59 5.0
  Extent = 0.5" x 0.5", rotation angle = 135 degrees
  Source counts = 37.7 +/- 8.2
  Background counts = 29.3
  Rate = 0.0002 +/- 5e-05

[Wed Sep 21 04:49:15 2011] Off-axis axis estimate = 1.93'
[Wed Sep 21 04:54:22 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:54:22 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Sep 21 04:54:22 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.810
[Wed Sep 21 04:54:22 2011] Giving source the simple spatial ID 61 for pass 0, mean size = 0.42"
[Wed Sep 21 04:54:35 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass0_src61.ximg exists
[Wed Sep 21 04:54:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03393_pi14-548_cl_pass0_src61.csv
[Wed Sep 21 04:54:35 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass0_src61_1.ximg exists
[Wed Sep 21 04:54:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03393_pi14-548_cl_pass0_src61.csv
[Wed Sep 21 04:54:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03393_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03393_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:54:39 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Wed Sep 21 04:54:39 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Wed Sep 21 04:54:39 2011] Fit fullrun_ccd2_acisf03393_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Wed Sep 21 04:55:47 2011] Spatial fit model total counts = 127.939000, observed total counts = 128.000000
[Wed Sep 21 04:55:47 2011] Offset between fit and detection position for source 20 = 1.115014 pixels
[Wed Sep 21 04:55:47 2011] 128.192400 total counts/ 89.166200 bgd. counts: snr = 4.132912
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.115014 pixels
  Position = (519.5, 124.7) = 17 45 33.68 -28 59 4.9
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 39.0 +/- 11.3
  Background counts = 89.2
  Rate = 0.0002 +/- 7e-05
[Wed Sep 21 04:55:47 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:55:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:55:47 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:55:47 2011] Source does appear to be extended
[Wed Sep 21 04:55:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 04:57:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:57:09 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Wed Sep 21 04:57:09 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.101
[Wed Sep 21 04:57:09 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 0.80"
[Wed Sep 21 04:57:11 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass1_src60.ximg exists
[Wed Sep 21 04:57:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03393_pi14-548_cl_pass1_src60.csv
[Wed Sep 21 04:57:11 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass1_src60_1.ximg exists
[Wed Sep 21 04:57:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03393_pi14-548_cl_pass1_src60.csv
[Wed Sep 21 04:57:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03393_pi14-548_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03393_pi14-548_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:57:15 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass1_tfrozen_src60.ximg exists
[Wed Sep 21 04:57:15 2011] fullrun_ccd2_acisf03393_pi14-548_cl_pass1_tfrozen_src60_1.ximg exists
[Wed Sep 21 04:57:15 2011] Fit fullrun_ccd2_acisf03393_pi14-548_cl_pass1_tfrozen_src60 appears to have run properly
[Wed Sep 21 04:58:20 2011] Spatial fit model total counts = 127.990000, observed total counts = 128.000000
[Wed Sep 21 04:58:20 2011] Offset between fit and detection position for source 20 = 0.002227 pixels
[Wed Sep 21 04:58:20 2011] 128.243800 total counts/ 89.220600 bgd. counts: snr = 4.131334
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.002227 pixels
  Position = (519.5, 124.7) = 17 45 33.68 -28 59 4.9
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 39.0 +/- 11.3
  Background counts = 89.2
  Rate = 0.0002 +/- 7e-05
[Wed Sep 21 04:58:20 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:58:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:58:20 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:58:20 2011] Source does appear to be extended
[Wed Sep 21 04:58:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 05:11:37 2011] Not overwriting source region fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_src.reg
[Wed Sep 21 05:11:37 2011] Extracting stamp from image fullrun_ccd2_acisf03393_pi14-548_cl_sm2.00.img.gz, (483, 88) - (556, 161)
[Wed Sep 21 05:11:37 2011] Writing fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20.gif
[Wed Sep 21 05:15:05 2011] ../../acisf03393/products/events/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_src.evt and ../../acisf03393/products/events/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed Sep 21 05:15:05 2011] Size of ../../acisf03393/products/events/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_src.evt.gz[events] = 79 counts
[Wed Sep 21 05:15:05 2011] Mean chipx,y = (272.72, 986.15)
[Wed Sep 21 05:15:05 2011] Mean tdetx,y = (4047.15, 3813.28)
[Wed Sep 21 05:15:05 2011] chipx,y range = (250.00-289.00, 968.00-1004.00)
[Wed Sep 21 05:15:05 2011] Size of ../../acisf03393/products/events/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 645 counts
[Wed Sep 21 05:15:05 2011] ../../acisf03393/products/images/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_src.img and ../../acisf03393/products/images/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed Sep 21 05:15:05 2011] ../../acisf03393/products/spectra/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_src.pi and ../../acisf03393/products/spectra/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Wed Sep 21 05:15:05 2011] Not generating rmf since there are only 39 counts
[Wed Sep 21 05:15:08 2011] ../../acisf03393/products/lightcurves/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_src.lc and ../../acisf03393/products/lightcurves/fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed Sep 21 05:21:16 2011] 180.966
[Wed Sep 21 05:30:29 2011] Updating aperture counts using extracted products
[Wed Sep 21 05:30:29 2011] Error reading totcts from fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20_src.pi.gz
[Wed Sep 21 05:30:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 05:30:32 2011] Using photon index=1.80, rate=0.000247, arf fullrun_ccd2_acisf03393_pi14-548_pass1_cl_src20.arf
[Wed Sep 21 05:30:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 05:30:32 2011] Updating source flux to 4.2e-15
[Wed Sep 21 05:33:20 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting