[Wed Sep 21 04:48:37 2011] Detection parameters:
  Position = (790.0, 827.2) = 17 45 51.49 -29 3 39.0
  Extent = 0.7" x 0.6", rotation angle = 24 degrees
  Source counts = 32.9 +/- 6.9
  Background counts = 15.1
  Rate = 0.0002 +/- 4e-05

[Wed Sep 21 04:48:51 2011] Off-axis axis estimate = 4.14'
[Wed Sep 21 04:54:17 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:54:17 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Wed Sep 21 04:54:17 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Wed Sep 21 04:54:17 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 0.87"
[Wed Sep 21 04:54:19 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass0_src62.ximg exists
[Wed Sep 21 04:54:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03393_pi14-548_cl_pass0_src62.csv
[Wed Sep 21 04:54:19 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass0_src62_1.ximg exists
[Wed Sep 21 04:54:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03393_pi14-548_cl_pass0_src62.csv
[Wed Sep 21 04:54:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03393_pi14-548_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03393_pi14-548_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:54:20 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass0_tfrozen_src62.ximg exists
[Wed Sep 21 04:54:20 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass0_tfrozen_src62_1.ximg exists
[Wed Sep 21 04:54:20 2011] Fit fullrun_ccd1_acisf03393_pi14-548_cl_pass0_tfrozen_src62 appears to have run properly
[Wed Sep 21 04:55:33 2011] Spatial fit model total counts = 92.955600, observed total counts = 93.000000
[Wed Sep 21 04:55:33 2011] Offset between fit and detection position for source 30 = 0.957599 pixels
[Wed Sep 21 04:55:33 2011] 94.782400 total counts/ 63.624300 bgd. counts: snr = 3.906245
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.957599 pixels
  Position = (790.7, 827.8) = 17 45 51.49 -29 3 38.9
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 31.2 +/- 9.7
  Background counts = 63.6
  Rate = 0.0002 +/- 6e-05
[Wed Sep 21 04:55:33 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:55:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:55:33 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:55:33 2011] Source does appear to be extended
[Wed Sep 21 04:55:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 04:57:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 04:57:02 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Sep 21 04:57:02 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.961
[Wed Sep 21 04:57:02 2011] Giving source the simple spatial ID 62 for pass 1, mean size = 0.62"
[Wed Sep 21 04:57:05 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass1_src62.ximg exists
[Wed Sep 21 04:57:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03393_pi14-548_cl_pass1_src62.csv
[Wed Sep 21 04:57:05 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass1_src62_1.ximg exists
[Wed Sep 21 04:57:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03393_pi14-548_cl_pass1_src62.csv
[Wed Sep 21 04:57:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03393_pi14-548_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03393_pi14-548_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 04:57:07 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass1_tfrozen_src62.ximg exists
[Wed Sep 21 04:57:07 2011] fullrun_ccd1_acisf03393_pi14-548_cl_pass1_tfrozen_src62_1.ximg exists
[Wed Sep 21 04:57:07 2011] Fit fullrun_ccd1_acisf03393_pi14-548_cl_pass1_tfrozen_src62 appears to have run properly
[Wed Sep 21 04:58:05 2011] Spatial fit model total counts = 94.196700, observed total counts = 94.000000
[Wed Sep 21 04:58:05 2011] Offset between fit and detection position for source 30 = 0.012929 pixels
[Wed Sep 21 04:58:05 2011] 96.292100 total counts/ 65.459800 bgd. counts: snr = 3.810821
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.012929 pixels
  Position = (790.7, 827.8) = 17 45 51.49 -29 3 38.9
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 30.8 +/- 9.8
  Background counts = 65.5
  Rate = 0.0002 +/- 6e-05
[Wed Sep 21 04:58:05 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 04:58:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 04:58:05 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 04:58:05 2011] Source does appear to be extended
[Wed Sep 21 04:58:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 05:04:58 2011] Not overwriting source region fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_src.reg
[Wed Sep 21 05:04:58 2011] Extracting stamp from image fullrun_ccd1_acisf03393_pi14-548_cl_sm2.00.img.gz, (762, 800) - (819, 856)
[Wed Sep 21 05:04:58 2011] Writing fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30.gif
[Wed Sep 21 05:08:49 2011] ../../acisf03393/products/events/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_src.evt and ../../acisf03393/products/events/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Wed Sep 21 05:08:49 2011] Size of ../../acisf03393/products/events/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_src.evt.gz[events] = 51 counts
[Wed Sep 21 05:08:49 2011] Mean chipx,y = (302.41, 665.47)
[Wed Sep 21 05:08:49 2011] Mean tdetx,y = (4466.53, 4409.41)
[Wed Sep 21 05:08:49 2011] chipx,y range = (288.00-328.00, 646.00-685.00)
[Wed Sep 21 05:08:50 2011] Size of ../../acisf03393/products/events/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 201 counts
[Wed Sep 21 05:08:50 2011] ../../acisf03393/products/images/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_src.img and ../../acisf03393/products/images/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Wed Sep 21 05:08:50 2011] ../../acisf03393/products/spectra/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_src.pi and ../../acisf03393/products/spectra/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Wed Sep 21 05:08:50 2011] Not generating rmf since there are only 30 counts
[Wed Sep 21 05:08:57 2011] ../../acisf03393/products/lightcurves/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_src.lc and ../../acisf03393/products/lightcurves/fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Wed Sep 21 05:11:33 2011] 194.647
[Wed Sep 21 05:30:26 2011] Updating aperture counts using extracted products
[Wed Sep 21 05:30:26 2011] Error reading totcts from fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30_src.pi.gz
[Wed Sep 21 05:30:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 05:30:28 2011] Using photon index=1.80, rate=0.000195, arf fullrun_ccd1_acisf03393_pi14-548_pass1_cl_src30.arf
[Wed Sep 21 05:30:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 05:30:28 2011] Updating source flux to 3.1e-15
[Wed Sep 21 05:32:08 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting