[Fri Oct 21 01:56:46 2011] Detection parameters:
  Position = (388.2, 202.2) = 4 33 44.35 -13 20 50.9
  Extent = 1.6" x 1.1", rotation angle = 44 degrees
  Source counts = 131.0 +/- 12.6
  Background counts = 28.0
  Rate = 0.01 +/- 0.001

[Fri Oct 21 01:56:46 2011] Off-axis axis estimate = 5.99'
[Fri Oct 21 01:57:32 2011] Using EEF radius (= 1.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 01:57:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 01:57:32 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Fri Oct 21 01:57:32 2011] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.109
[Fri Oct 21 01:57:32 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.62"
[Fri Oct 21 01:57:33 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 01:57:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03361_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 01:57:33 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 01:57:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03361_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 01:57:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03361_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03361_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 01:57:33 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 01:57:33 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 01:57:33 2011] Fit fullrun_ccd7_acisf03361_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 01:57:43 2011] Spatial fit model total counts = 125.971000, observed total counts = 130.000000
[Fri Oct 21 01:57:43 2011] Offset between fit and detection position for source 11 = 2.301342 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.301342 pixels
  Position = (389.5, 204.1) = 4 33 44.32 -13 20 50.2
  Extent = 2.0 (2.0-2.2)", rotation angle = 0
  Source counts = 121.5 +/- 11.0
  Background counts = 0.0
  Rate = 0.01 +/- 0.001
[Fri Oct 21 01:57:43 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 01:57:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 01:57:43 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 01:57:43 2011] Source does appear to be extended
[Fri Oct 21 01:57:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 01:57:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 01:57:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 01:57:54 2011] Initial guess for spatial extent in simple fitting = 2.04"
[Fri Oct 21 01:57:54 2011] source mask rpix=4.1, npix_max = 86, mask sum = 90, frac = 1.044
[Fri Oct 21 01:57:54 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.04"
[Fri Oct 21 01:57:54 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 01:57:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03361_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 01:57:54 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 01:57:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03361_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 01:57:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03361_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03361_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 01:57:55 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 01:57:55 2011] fullrun_ccd7_acisf03361_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 01:57:55 2011] Fit fullrun_ccd7_acisf03361_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 01:57:59 2011] Spatial fit model total counts = 142.896000, observed total counts = 143.000000
[Fri Oct 21 01:57:59 2011] Offset between fit and detection position for source 11 = 1.491909 pixels
[Fri Oct 21 01:57:59 2011] 142.869700 total counts/ 27.030700 bgd. counts: snr = 22.280563
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.491909 pixels
  Position = (388.7, 202.8) = 4 33 44.35 -13 20 50.8
  Extent = 2.1 (1.6-2.5)", rotation angle = 0
  Source counts = 115.8 +/- 12.0
  Background counts = 27.0
  Rate = 0.01 +/- 0.001
[Fri Oct 21 01:57:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 01:57:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 01:57:59 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 01:57:59 2011] Source does appear to be extended
[Fri Oct 21 01:57:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 01:58:53 2011] Not overwriting source region fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 21 01:58:53 2011] Extracting stamp from image fullrun_ccd7_acisf03361_pi14-548_cl_sm2.00.img.gz, (294, 108) - (483, 297)
[Fri Oct 21 01:58:53 2011] Writing fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11.gif
[Fri Oct 21 01:58:57 2011] ../../acisf03361/products/events/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_src.evt and ../../acisf03361/products/events/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 21 01:58:57 2011] Size of ../../acisf03361/products/events/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_src.evt.gz[events] = 159 counts
[Fri Oct 21 01:58:57 2011] Mean chipx,y = (870.82, 835.41)
[Fri Oct 21 01:58:57 2011] Mean tdetx,y = (4787.82, 2537.41)
[Fri Oct 21 01:58:57 2011] chipx,y range = (840.00-902.00, 807.00-866.00)
[Fri Oct 21 01:58:57 2011] Size of ../../acisf03361/products/events/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 302 counts
[Fri Oct 21 01:58:57 2011] ../../acisf03361/products/images/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_src.img and ../../acisf03361/products/images/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 21 01:58:57 2011] ../../acisf03361/products/spectra/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_src.pi and ../../acisf03361/products/spectra/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 21 01:59:00 2011] ../../acisf03361/products/lightcurves/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_src.lc and ../../acisf03361/products/lightcurves/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 21 01:59:08 2011] Keeping rmf generated by specextract
[Fri Oct 21 01:59:08 2011] 214.836
[Fri Oct 21 01:59:10 2011] Updating aperture counts using extracted products
[Fri Oct 21 01:59:10 2011] Error reading totcts from fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 21 01:59:10 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 01:59:10 2011] Using photon index=1.80, rate=0.0116, arf fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11.arf
[Fri Oct 21 01:59:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 01:59:10 2011] Updating source flux to 8.2e-14
[Fri Oct 21 01:59:18 2011] Reading fit data from acisf03361/analysis//spectral/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_pl.csv
[Fri Oct 21 01:59:18 2011] Spectral fit parameter nH value = 3.74799e+13
[Fri Oct 21 01:59:18 2011] Spectral fit parameter PhoIndex value = 1.7917
[Fri Oct 21 01:59:18 2011] Failed to get F(0.3-8.0) from acisf03361/analysis//spectral/fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 01:59:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 01:59:18 2011] Using Nh = 3.7e+13, photon index=1.79, rate=0.0116, arf fullrun_ccd7_acisf03361_pi14-548_pass1_cl_src11.arf
[Fri Oct 21 01:59:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 01:59:18 2011] Updating source flux to 8e-14