[Mon Oct  3 08:34:59 2011] Detection parameters:
  Position = (589.7, 627.1) = 10 34 6.61 57 56 7.2
  Extent = 1.9" x 0.9", rotation angle = 88 degrees
  Source counts = 107.4 +/- 10.7
  Background counts = 7.6
  Rate = 0.003 +/- 0.0003

[Mon Oct  3 08:35:11 2011] Off-axis axis estimate = 6.21'
[Mon Oct  3 08:36:41 2011] Using EEF radius (= 1.74 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 08:36:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 08:36:41 2011] Initial guess for spatial extent in simple fitting = 1.74"
[Mon Oct  3 08:36:41 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.983
[Mon Oct  3 08:36:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.74"
[Mon Oct  3 08:36:41 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 08:36:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03343_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 08:36:41 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 08:36:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03343_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 08:36:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03343_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03343_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 08:36:42 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 08:36:42 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 08:36:42 2011] Fit fullrun_ccd3_acisf03343_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 08:37:03 2011] Spatial fit model total counts = 112.005000, observed total counts = 113.000000
[Mon Oct  3 08:37:03 2011] Offset between fit and detection position for source 2 = 1.048025 pixels
[Mon Oct  3 08:37:03 2011] 112.057300 total counts/ 10.864300 bgd. counts: snr = 30.700793
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.048025 pixels
  Position = (590.1, 628.1) = 10 34 6.61 57 56 7.5
  Extent = 1.5 (1.2-1.9)", rotation angle = 0
  Source counts = 101.2 +/- 10.6
  Background counts = 10.9
  Rate = 0.003 +/- 0.0003
[Mon Oct  3 08:37:03 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 08:37:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 08:37:03 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 08:37:03 2011] Source does appear to be extended
[Mon Oct  3 08:37:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 08:37:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 08:37:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 08:37:49 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Mon Oct  3 08:37:49 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.067
[Mon Oct  3 08:37:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.54"
[Mon Oct  3 08:37:50 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 08:37:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03343_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 08:37:50 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 08:37:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03343_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 08:37:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03343_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03343_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 08:37:53 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 08:37:53 2011] fullrun_ccd3_acisf03343_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 08:37:53 2011] Fit fullrun_ccd3_acisf03343_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 08:38:11 2011] Spatial fit model total counts = 110.532000, observed total counts = 111.000000
[Mon Oct  3 08:38:11 2011] Offset between fit and detection position for source 2 = 0.269048 pixels
[Mon Oct  3 08:38:11 2011] 111.495400 total counts/ 18.762400 bgd. counts: snr = 21.408691
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.269048 pixels
  Position = (590.1, 627.8) = 10 34 6.62 57 56 7.3
  Extent = 1.4 (1.1-1.7)", rotation angle = 0
  Source counts = 92.7 +/- 10.6
  Background counts = 18.8
  Rate = 0.003 +/- 0.0003
[Mon Oct  3 08:38:11 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 08:38:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 08:38:11 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 08:38:11 2011] Source does appear to be extended
[Mon Oct  3 08:38:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 08:49:18 2011] Not overwriting source region fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_src.reg
[Mon Oct  3 08:49:18 2011] Extracting stamp from image fullrun_ccd3_acisf03343_pi14-548_cl_sm2.00.img.gz, (528, 566) - (652, 690)
[Mon Oct  3 08:49:18 2011] Writing fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2.gif
[Mon Oct  3 08:49:21 2011] ../../acisf03343/products/events/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_src.evt and ../../acisf03343/products/events/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct  3 08:49:21 2011] Size of ../../acisf03343/products/events/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_src.evt.gz[events] = 109 counts
[Mon Oct  3 08:49:21 2011] Mean chipx,y = (385.16, 516.76)
[Mon Oct  3 08:49:21 2011] Mean tdetx,y = (4615.24, 3446.16)
[Mon Oct  3 08:49:21 2011] chipx,y range = (365.00-407.00, 491.00-539.00)
[Mon Oct  3 08:49:21 2011] Size of ../../acisf03343/products/events/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 52 counts
[Mon Oct  3 08:49:21 2011] ../../acisf03343/products/images/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_src.img and ../../acisf03343/products/images/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct  3 08:49:21 2011] Not generating rmf since there are only 92 counts
[Mon Oct  3 08:49:21 2011] arf not found, will run specextract
[Mon Oct  3 08:49:23 2011] ../../acisf03343/products/spectra/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_bkg.pi not found
[Mon Oct  3 08:49:23 2011] ../../acisf03343/products/spectra/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2.warf not found
[Mon Oct  3 08:49:23 2011] ../../acisf03343/products/spectra/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2.wrmf not found
[Mon Oct  3 08:49:23 2011] Removal of ../../acisf03343/products/spectra/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2.soff failed
[Mon Oct  3 08:49:23 2011] Failed to rename ../../acisf03343/products/spectra/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_grp.pi to ../../acisf03343/products/spectra/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_src.pi
[Mon Oct  3 08:49:29 2011] ../../acisf03343/products/lightcurves/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_src.lc and ../../acisf03343/products/lightcurves/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct  3 08:53:37 2011] No arf file found
[Mon Oct  3 08:54:22 2011] Updating aperture counts using extracted products
[Mon Oct  3 08:54:22 2011] Error reading totcts from fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_src.pi
[Mon Oct  3 08:54:22 2011] No arf file for this source, not re-computing flux
[Mon Oct  3 08:54:31 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct  3 08:54:32 2011] acisf03343/analysis//spectral/fullrun_ccd3_acisf03343_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete