[Sun Oct 30 18:31:24 2011] Detection parameters:
  Position = (251.3, 476.4) = 12 38 21.24 62 10 18.9
  Extent = 3.0" x 1.6", rotation angle = 61 degrees
  Source counts = 14.8 +/- 5.7
  Background counts = 18.2
  Rate = 9e-05 +/- 4e-05

[Sun Oct 30 18:31:27 2011] Off-axis axis estimate = 10.80'
[Sun Oct 30 18:33:13 2011] Using EEF radius (= 5.18 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 18:33:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 18:33:13 2011] Initial guess for spatial extent in simple fitting = 5.18"
[Sun Oct 30 18:33:13 2011] source mask rpix=10.5, npix_max = 486, mask sum = 474, frac = 0.974
[Sun Oct 30 18:33:13 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 5.18"
[Sun Oct 30 18:33:14 2011] fullrun_ccd0_acisf03293_pi14-548_cl_pass0_src5.ximg exists
[Sun Oct 30 18:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03293_pi14-548_cl_pass0_src5.csv
[Sun Oct 30 18:33:14 2011] fullrun_ccd0_acisf03293_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Oct 30 18:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03293_pi14-548_cl_pass0_src5.csv
[Sun Oct 30 18:33:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03293_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03293_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 18:33:14 2011] fullrun_ccd0_acisf03293_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Oct 30 18:33:14 2011] fullrun_ccd0_acisf03293_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Oct 30 18:33:14 2011] Fit fullrun_ccd0_acisf03293_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Oct 30 18:33:35 2011] Spatial fit model total counts = 102.869000, observed total counts = 94.000000
[Sun Oct 30 18:33:35 2011] Offset between fit and detection position for source 6 = 1.943404 pixels
[Sun Oct 30 18:33:35 2011] 103.262700 total counts/ 90.447900 bgd. counts: snr = 1.347450
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.943404 pixels
  Position = (252.2, 474.7) = 12 38 21.21 62 10 17.8
  Extent = 1.3" x 1.3", rotation angle = 0
  Source counts = 12.8 +/- 10.2
  Background counts = 90.4
  Rate = 8e-05 +/- 6e-05
  Deleting source due to low Poisson probability