[Fri Oct 21 10:51:09 2011] Detection parameters:
  Position = (849.5, 398.7) = 17 20 10.56 35 36 22.0
  Extent = 0.5" x 0.5", rotation angle = 168 degrees
  Source counts = 22.6 +/- 4.9
  Background counts = 1.4
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 10:51:10 2011] Off-axis axis estimate = 3.23'
[Fri Oct 21 10:51:54 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:51:54 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Fri Oct 21 10:51:54 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.711
[Fri Oct 21 10:51:54 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.63"
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 21 10:51:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src10.csv
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 21 10:51:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src10.csv
[Fri Oct 21 10:51:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 21 10:51:55 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 21 10:51:55 2011] Fit fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct 21 10:52:04 2011] Spatial fit model total counts = 29.119000, observed total counts = 29.000000
[Fri Oct 21 10:52:04 2011] Offset between fit and detection position for source 9 = 0.718539 pixels
[Fri Oct 21 10:52:04 2011] 28.928570 total counts/ 4.526770 bgd. counts: snr = 11.469055
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.718539 pixels
  Position = (850.0, 399.2) = 17 20 10.56 35 36 22.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 24.4 +/- 5.4
  Background counts = 4.5
  Rate = 0.001 +/- 0.0003
[Fri Oct 21 10:52:04 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:04 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:04 2011] Source does appear to be extended
[Fri Oct 21 10:52:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:52:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:52:21 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 21 10:52:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.059
[Fri Oct 21 10:52:21 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.58"
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src9.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src9.csv
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src9.csv
[Fri Oct 21 10:52:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Oct 21 10:52:22 2011] Fit fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Oct 21 10:52:29 2011] Spatial fit model total counts = 27.412400, observed total counts = 29.000000
[Fri Oct 21 10:52:29 2011] Offset between fit and detection position for source 9 = 0.070996 pixels
[Fri Oct 21 10:52:29 2011] 27.670920 total counts/ 2.436620 bgd. counts: snr = 16.165806
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.070996 pixels
  Position = (850.0, 399.1) = 17 20 10.56 35 36 21.9
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 25.2 +/- 5.3
  Background counts = 2.4
  Rate = 0.001 +/- 0.0003
[Fri Oct 21 10:52:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:29 2011] Source does appear to be extended
[Fri Oct 21 10:52:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:54:09 2011] Not overwriting source region fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_src.reg
[Fri Oct 21 10:54:09 2011] Extracting stamp from image fullrun_ccd3_acisf03280_pi14-548_cl_sm2.00.img.gz, (822, 371) - (878, 427)
[Fri Oct 21 10:54:09 2011] Writing fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9.gif
[Fri Oct 21 10:54:32 2011] ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_src.evt and ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct 21 10:54:32 2011] Size of ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_src.evt.gz[events] = 24 counts
[Fri Oct 21 10:54:32 2011] Mean chipx,y = (823.54, 620.17)
[Fri Oct 21 10:54:32 2011] Mean tdetx,y = (4511.83, 3884.54)
[Fri Oct 21 10:54:32 2011] chipx,y range = (806.00-839.00, 603.00-636.00)
[Fri Oct 21 10:54:32 2011] Size of ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 17 counts
[Fri Oct 21 10:54:32 2011] ../../acisf03280/products/images/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_src.img and ../../acisf03280/products/images/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct 21 10:54:32 2011] ../../acisf03280/products/spectra/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_src.pi and ../../acisf03280/products/spectra/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Oct 21 10:54:32 2011] Not generating rmf since there are only 25 counts
[Fri Oct 21 10:54:34 2011] ../../acisf03280/products/lightcurves/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_src.lc and ../../acisf03280/products/lightcurves/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct 21 10:54:38 2011] 197.627
[Fri Oct 21 10:54:41 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:54:41 2011] Error reading totcts from fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Oct 21 10:54:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:54:42 2011] Using photon index=1.80, rate=0.00121, arf fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src9.arf
[Fri Oct 21 10:54:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:54:42 2011] Updating source flux to 1.4e-14
[Fri Oct 21 10:54:53 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting