[Fri Oct 21 10:51:08 2011] Detection parameters:
  Position = (922.8, 970.3) = 17 20 7.59 35 41 3.2
  Extent = 0.5" x 0.5", rotation angle = 63 degrees
  Source counts = 108.6 +/- 10.6
  Background counts = 3.4
  Rate = 0.005 +/- 0.0005

[Fri Oct 21 10:51:10 2011] Off-axis axis estimate = 7.17'
[Fri Oct 21 10:51:54 2011] Using EEF radius (= 2.28 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:51:54 2011] Initial guess for spatial extent in simple fitting = 2.28"
[Fri Oct 21 10:51:54 2011] source mask rpix=4.6, npix_max = 105, mask sum = 91, frac = 0.861
[Fri Oct 21 10:51:54 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 2.28"
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct 21 10:51:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct 21 10:51:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 10:51:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 21 10:51:54 2011] Fit fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 21 10:52:04 2011] Spatial fit model total counts = 137.114000, observed total counts = 133.000000
[Fri Oct 21 10:52:04 2011] Offset between fit and detection position for source 3 = 1.722036 pixels
[Fri Oct 21 10:52:04 2011] 136.993440 total counts/ 7.596440 bgd. counts: snr = 46.948222
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.722036 pixels
  Position = (924.5, 970.6) = 17 20 7.54 35 41 3.1
  Extent = 1.7 (1.3-1.9)", rotation angle = 0
  Source counts = 129.4 +/- 11.7
  Background counts = 7.6
  Rate = 0.006 +/- 0.0006
[Fri Oct 21 10:52:04 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:04 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:04 2011] Source does appear to be extended
[Fri Oct 21 10:52:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:52:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:52:21 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Fri Oct 21 10:52:21 2011] source mask rpix=3.4, npix_max = 61, mask sum = 51, frac = 0.832
[Fri Oct 21 10:52:21 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 1.68"
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 10:52:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 21 10:52:22 2011] Fit fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 21 10:52:29 2011] Spatial fit model total counts = 128.783000, observed total counts = 128.000000
[Fri Oct 21 10:52:29 2011] Offset between fit and detection position for source 3 = 0.453630 pixels
[Fri Oct 21 10:52:29 2011] 129.807000 total counts/ 31.370000 bgd. counts: snr = 17.575234
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.453630 pixels
  Position = (924.1, 970.5) = 17 20 7.55 35 41 3.0
  Extent = 1.3 (1.0-1.5)", rotation angle = 0
  Source counts = 98.4 +/- 11.4
  Background counts = 31.4
  Rate = 0.005 +/- 0.0005
[Fri Oct 21 10:52:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:29 2011] Source does appear to be extended
[Fri Oct 21 10:52:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:54:09 2011] Not overwriting source region fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 10:54:09 2011] Extracting stamp from image fullrun_ccd3_acisf03280_pi14-548_cl_sm2.00.img.gz, (866, 913) - (982, 1028)
[Fri Oct 21 10:54:09 2011] Writing fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 10:54:18 2011] ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_src.evt and ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 10:54:18 2011] Size of ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_src.evt.gz[events] = 126 counts
[Fri Oct 21 10:54:18 2011] Mean chipx,y = (471.54, 159.71)
[Fri Oct 21 10:54:18 2011] Mean tdetx,y = (4972.29, 3532.54)
[Fri Oct 21 10:54:18 2011] chipx,y range = (448.00-490.00, 134.00-179.00)
[Fri Oct 21 10:54:18 2011] Size of ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 14 counts
[Fri Oct 21 10:54:18 2011] ../../acisf03280/products/images/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_src.img and ../../acisf03280/products/images/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 10:54:18 2011] ../../acisf03280/products/spectra/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_src.pi and ../../acisf03280/products/spectra/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 10:54:18 2011] Not generating rmf since there are only 98 counts
[Fri Oct 21 10:54:20 2011] ../../acisf03280/products/lightcurves/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_src.lc and ../../acisf03280/products/lightcurves/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 10:54:38 2011] 174.35
[Fri Oct 21 10:54:41 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:54:41 2011] Error reading totcts from fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 10:54:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:54:41 2011] Using photon index=1.80, rate=0.00472, arf fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 10:54:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:54:41 2011] Updating source flux to 6.1e-14
[Fri Oct 21 10:54:53 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting