[Fri Oct 21 10:51:09 2011] Detection parameters:
  Position = (272.0, 516.0) = 17 20 33.86 35 37 19.7
  Extent = 0.5" x 0.5", rotation angle = 60 degrees
  Source counts = 18.6 +/- 4.4
  Background counts = 0.4
  Rate = 0.0009 +/- 0.0002

[Fri Oct 21 10:51:10 2011] Off-axis axis estimate = 3.24'
[Fri Oct 21 10:51:54 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:51:54 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Fri Oct 21 10:51:54 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.260
[Fri Oct 21 10:51:54 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.63"
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct 21 10:51:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src11.csv
[Fri Oct 21 10:51:54 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct 21 10:51:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src11.csv
[Fri Oct 21 10:51:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03280_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:51:55 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct 21 10:51:55 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct 21 10:51:55 2011] Fit fullrun_ccd3_acisf03280_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct 21 10:52:04 2011] Spatial fit model total counts = 18.363900, observed total counts = 19.000000
[Fri Oct 21 10:52:04 2011] Offset between fit and detection position for source 10 = 0.704049 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.704049 pixels
  Position = (272.5, 516.5) = 17 20 33.86 35 37 19.7
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 18.4 +/- 4.3
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 10:52:04 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:04 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:04 2011] Source does appear to be extended
[Fri Oct 21 10:52:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:52:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:52:21 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Oct 21 10:52:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.814
[Fri Oct 21 10:52:21 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.57"
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src10.csv
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src10.csv
[Fri Oct 21 10:52:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03280_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Oct 21 10:52:22 2011] fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 21 10:52:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Oct 21 10:52:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03280_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:52:29 2011] Spatial fit model total counts = 17.959000, observed total counts = 19.000000
[Fri Oct 21 10:52:29 2011] Offset between fit and detection position for source 10 = 0.076329 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.076329 pixels
  Position = (272.6, 516.5) = 17 20 33.86 35 37 19.7
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 18.0 +/- 4.2
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri Oct 21 10:52:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:29 2011] Source does appear to be extended
[Fri Oct 21 10:52:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:54:09 2011] Not overwriting source region fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_src.reg
[Fri Oct 21 10:54:09 2011] Extracting stamp from image fullrun_ccd3_acisf03280_pi14-548_cl_sm2.00.img.gz, (245, 489) - (301, 544)
[Fri Oct 21 10:54:09 2011] Writing fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10.gif
[Fri Oct 21 10:54:34 2011] ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_src.evt and ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct 21 10:54:34 2011] Size of ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_src.evt.gz[events] = 19 counts
[Fri Oct 21 10:54:34 2011] Mean chipx,y = (326.89, 941.37)
[Fri Oct 21 10:54:34 2011] Mean tdetx,y = (4190.63, 3387.89)
[Fri Oct 21 10:54:34 2011] chipx,y range = (312.00-345.00, 925.00-961.00)
[Fri Oct 21 10:54:34 2011] Size of ../../acisf03280/products/events/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 3 counts
[Fri Oct 21 10:54:34 2011] ../../acisf03280/products/images/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_src.img and ../../acisf03280/products/images/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct 21 10:54:34 2011] ../../acisf03280/products/spectra/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_src.pi and ../../acisf03280/products/spectra/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct 21 10:54:34 2011] Not generating rmf since there are only 17 counts
[Fri Oct 21 10:54:37 2011] ../../acisf03280/products/lightcurves/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_src.lc and ../../acisf03280/products/lightcurves/fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct 21 10:54:38 2011] 191.638
[Fri Oct 21 10:54:41 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:54:41 2011] Error reading totcts from fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct 21 10:54:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:54:42 2011] Using photon index=1.80, rate=0.000862, arf fullrun_ccd3_acisf03280_pi14-548_pass1_cl_src10.arf
[Fri Oct 21 10:54:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:54:42 2011] Updating source flux to 1e-14
[Fri Oct 21 10:54:53 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting