[Fri Oct 21 10:51:07 2011] Detection parameters:
  Position = (663.5, 1153.4) = 17 20 46.87 35 36 22.7
  Extent = 0.7" x 0.5", rotation angle = 71 degrees
  Source counts = 15.6 +/- 4.0
  Background counts = 0.4
  Rate = 0.0008 +/- 0.0002

[Fri Oct 21 10:51:08 2011] Off-axis axis estimate = 4.87'
[Fri Oct 21 10:51:53 2011] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:51:53 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Oct 21 10:51:53 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.799
[Fri Oct 21 10:51:53 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.13"
[Fri Oct 21 10:51:53 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct 21 10:51:53 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct 21 10:51:53 2011] Fit fullrun_ccd2_acisf03280_pi14-548_cl_pass0_src4 appears to have run properly
[Fri Oct 21 10:51:54 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 21 10:51:54 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 21 10:51:54 2011] Fit fullrun_ccd2_acisf03280_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 21 10:52:02 2011] Spatial fit model total counts = 16.198100, observed total counts = 17.000000
[Fri Oct 21 10:52:02 2011] Offset between fit and detection position for source 3 = 0.819869 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.819869 pixels
  Position = (664.1, 1153.9) = 17 20 46.86 35 36 22.7
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 15.8 +/- 4.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 10:52:02 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:02 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:02 2011] Source does appear to be extended
[Fri Oct 21 10:52:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:52:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:52:21 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct 21 10:52:21 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Fri Oct 21 10:52:21 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.74"
[Fri Oct 21 10:52:21 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 21 10:52:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03280_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 10:52:21 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 21 10:52:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03280_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 10:52:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03280_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03280_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:52:21 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 21 10:52:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03280_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Oct 21 10:52:21 2011] fullrun_ccd2_acisf03280_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 21 10:52:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03280_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Oct 21 10:52:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03280_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03280_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:52:27 2011] Spatial fit model total counts = 15.450900, observed total counts = 17.000000
[Fri Oct 21 10:52:27 2011] Offset between fit and detection position for source 3 = 0.244746 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.244746 pixels
  Position = (664.0, 1154.2) = 17 20 46.87 35 36 22.9
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Oct 21 10:52:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:27 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:27 2011] Source does appear to be extended
[Fri Oct 21 10:52:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:53:45 2011] Not overwriting source region fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 10:53:45 2011] Extracting stamp from image fullrun_ccd2_acisf03280_pi14-548_cl_sm2.00.img.gz, (631, 1121) - (697, 1187)
[Fri Oct 21 10:53:45 2011] Writing fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 10:53:54 2011] ../../acisf03280/products/events/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_src.evt and ../../acisf03280/products/events/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 10:53:54 2011] Size of ../../acisf03280/products/events/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_src.evt.gz[events] = 16 counts
[Fri Oct 21 10:53:54 2011] Mean chipx,y = (844.56, 814.38)
[Fri Oct 21 10:53:54 2011] Mean tdetx,y = (3875.38, 3241.44)
[Fri Oct 21 10:53:54 2011] chipx,y range = (829.00-861.00, 797.00-833.00)
[Fri Oct 21 10:53:54 2011] Size of ../../acisf03280/products/events/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 5 counts
[Fri Oct 21 10:53:54 2011] ../../acisf03280/products/images/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_src.img and ../../acisf03280/products/images/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 10:53:54 2011] ../../acisf03280/products/spectra/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_src.pi and ../../acisf03280/products/spectra/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 10:53:54 2011] Not generating rmf since there are only 14 counts
[Fri Oct 21 10:53:56 2011] ../../acisf03280/products/lightcurves/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_src.lc and ../../acisf03280/products/lightcurves/fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 10:54:08 2011] 185.733
[Fri Oct 21 10:54:41 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:54:41 2011] Error reading totcts from fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 10:54:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:54:41 2011] Using photon index=1.80, rate=0.000713, arf fullrun_ccd2_acisf03280_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 10:54:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:54:41 2011] Updating source flux to 8.6e-15
[Fri Oct 21 10:54:49 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting