[Fri Oct 21 10:51:05 2011] Detection parameters:
  Position = (462.1, 594.3) = 17 19 57.13 35 31 40.2
  Extent = 1.6" x 1.1", rotation angle = 178 degrees
  Source counts = 35.7 +/- 6.2
  Background counts = 2.3
  Rate = 0.002 +/- 0.0003

[Fri Oct 21 10:51:07 2011] Off-axis axis estimate = 6.32'
[Fri Oct 21 10:51:52 2011] Using EEF radius (= 1.80 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:51:52 2011] Initial guess for spatial extent in simple fitting = 1.80"
[Fri Oct 21 10:51:52 2011] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.930
[Fri Oct 21 10:51:52 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.80"
[Fri Oct 21 10:51:53 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 21 10:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03280_pi14-548_cl_pass0_src5.csv
[Fri Oct 21 10:51:53 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 21 10:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03280_pi14-548_cl_pass0_src5.csv
[Fri Oct 21 10:51:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03280_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03280_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:51:53 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 21 10:51:53 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 21 10:51:53 2011] Fit fullrun_ccd1_acisf03280_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 21 10:52:01 2011] Spatial fit model total counts = 36.092400, observed total counts = 38.000000
[Fri Oct 21 10:52:01 2011] Offset between fit and detection position for source 2 = 0.749498 pixels
[Fri Oct 21 10:52:01 2011] 36.706600 total counts/ 0.000000 bgd. counts: snr = 3812358657724957.500000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.749498 pixels
  Position = (462.8, 594.4) = 17 19 57.12 35 31 40.0
  Extent = 1.7 (1.1-2.0)", rotation angle = 0
  Source counts = 36.7 +/- 6.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct 21 10:52:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:01 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:01 2011] Source does appear to be extended
[Fri Oct 21 10:52:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:52:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 10:52:19 2011] Initial guess for spatial extent in simple fitting = 1.69"
[Fri Oct 21 10:52:19 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.038
[Fri Oct 21 10:52:19 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.69"
[Fri Oct 21 10:52:20 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct 21 10:52:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03280_pi14-548_cl_pass1_src5.csv
[Fri Oct 21 10:52:20 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct 21 10:52:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03280_pi14-548_cl_pass1_src5.csv
[Fri Oct 21 10:52:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03280_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03280_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 10:52:20 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 21 10:52:20 2011] fullrun_ccd1_acisf03280_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 21 10:52:20 2011] Fit fullrun_ccd1_acisf03280_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct 21 10:52:27 2011] Spatial fit model total counts = 36.399700, observed total counts = 38.000000
[Fri Oct 21 10:52:27 2011] Offset between fit and detection position for source 2 = 0.055873 pixels
[Fri Oct 21 10:52:27 2011] 37.048070 total counts/ 1.349970 bgd. counts: snr = 30.724374
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.055873 pixels
  Position = (462.8, 594.4) = 17 19 57.12 35 31 40.0
  Extent = 1.6 (1.1-2.0)", rotation angle = 0
  Source counts = 35.7 +/- 6.1
  Background counts = 1.3
  Rate = 0.002 +/- 0.0003
[Fri Oct 21 10:52:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 10:52:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 10:52:27 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 10:52:27 2011] Source does appear to be extended
[Fri Oct 21 10:52:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 10:53:10 2011] Not overwriting source region fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 21 10:53:10 2011] Extracting stamp from image fullrun_ccd1_acisf03280_pi14-548_cl_sm2.00.img.gz, (388, 520) - (537, 669)
[Fri Oct 21 10:53:10 2011] Writing fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2.gif
[Fri Oct 21 10:53:22 2011] ../../acisf03280/products/events/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_src.evt and ../../acisf03280/products/events/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 21 10:53:22 2011] Size of ../../acisf03280/products/events/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_src.evt.gz[events] = 39 counts
[Fri Oct 21 10:53:22 2011] Mean chipx,y = (419.90, 790.05)
[Fri Oct 21 10:53:22 2011] Mean tdetx,y = (4341.95, 4526.90)
[Fri Oct 21 10:53:22 2011] chipx,y range = (396.00-437.00, 769.00-808.00)
[Fri Oct 21 10:53:22 2011] Size of ../../acisf03280/products/events/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 31 counts
[Fri Oct 21 10:53:22 2011] ../../acisf03280/products/images/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_src.img and ../../acisf03280/products/images/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 21 10:53:22 2011] ../../acisf03280/products/spectra/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_src.pi and ../../acisf03280/products/spectra/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 21 10:53:22 2011] Not generating rmf since there are only 35 counts
[Fri Oct 21 10:53:24 2011] ../../acisf03280/products/lightcurves/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_src.lc and ../../acisf03280/products/lightcurves/fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 21 10:53:45 2011] 184.167
[Fri Oct 21 10:54:41 2011] Updating aperture counts using extracted products
[Fri Oct 21 10:54:41 2011] Error reading totcts from fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 21 10:54:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 10:54:41 2011] Using photon index=1.80, rate=0.00171, arf fullrun_ccd1_acisf03280_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 10:54:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 10:54:41 2011] Updating source flux to 2e-14
[Fri Oct 21 10:54:45 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting