[Mon Sep 26 21:18:14 2011] Detection parameters:
  Position = (276.3, 574.7) = 11 32 16.27 -19 55 20.9
  Extent = 1.5" x 0.8", rotation angle = 72 degrees
  Source counts = 114.3 +/- 10.8
  Background counts = 2.7
  Rate = 0.008 +/- 0.0008

[Mon Sep 26 21:18:16 2011] Off-axis axis estimate = 6.59'
[Mon Sep 26 21:19:04 2011] Using EEF radius (= 1.94 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 21:19:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 21:19:04 2011] Initial guess for spatial extent in simple fitting = 1.94"
[Mon Sep 26 21:19:04 2011] source mask rpix=3.9, npix_max = 79, mask sum = 81, frac = 1.023
[Mon Sep 26 21:19:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.94"
[Mon Sep 26 21:19:05 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 21:19:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03276_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 21:19:05 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 21:19:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03276_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 21:19:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03276_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03276_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 21:19:05 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 21:19:05 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 21:19:05 2011] Fit fullrun_ccd3_acisf03276_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 21:19:14 2011] Spatial fit model total counts = 116.269000, observed total counts = 117.000000
[Mon Sep 26 21:19:14 2011] Offset between fit and detection position for source 3 = 0.387633 pixels
[Mon Sep 26 21:19:14 2011] 116.714280 total counts/ 6.342280 bgd. counts: snr = 43.826441
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.387633 pixels
  Position = (276.6, 575.0) = 11 32 16.28 -19 55 21.1
  Extent = 1.3 (1.2-1.5)", rotation angle = 0
  Source counts = 110.4 +/- 10.8
  Background counts = 6.3
  Rate = 0.008 +/- 0.0008
[Mon Sep 26 21:19:14 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 21:19:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 21:19:14 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 21:19:14 2011] Source does appear to be extended
[Mon Sep 26 21:19:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 21:19:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 21:19:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 21:19:41 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Mon Sep 26 21:19:41 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023
[Mon Sep 26 21:19:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.33"
[Mon Sep 26 21:19:41 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 21:19:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03276_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 21:19:41 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 21:19:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03276_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 21:19:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03276_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03276_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 21:19:42 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 21:19:42 2011] fullrun_ccd3_acisf03276_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 21:19:42 2011] Fit fullrun_ccd3_acisf03276_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 21:19:48 2011] Spatial fit model total counts = 113.666000, observed total counts = 114.000000
[Mon Sep 26 21:19:48 2011] Offset between fit and detection position for source 3 = 0.144481 pixels
[Mon Sep 26 21:19:48 2011] 114.258780 total counts/ 4.038780 bgd. counts: snr = 54.844781
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.144481 pixels
  Position = (276.6, 574.8) = 11 32 16.28 -19 55 21.1
  Extent = 1.3 (1.1-1.5)", rotation angle = 0
  Source counts = 110.2 +/- 10.7
  Background counts = 4.0
  Rate = 0.008 +/- 0.0008
[Mon Sep 26 21:19:48 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 21:19:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 21:19:48 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 21:19:48 2011] Source does appear to be extended
[Mon Sep 26 21:19:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 21:21:35 2011] Not overwriting source region fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_src.reg
[Mon Sep 26 21:21:35 2011] Extracting stamp from image fullrun_ccd3_acisf03276_pi14-548_cl_sm2.00.img.gz, (216, 515) - (337, 635)
[Mon Sep 26 21:21:35 2011] Writing fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3.gif
[Mon Sep 26 21:21:36 2011] ../../acisf03276/products/events/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_src.evt and ../../acisf03276/products/events/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Sep 26 21:21:36 2011] Size of ../../acisf03276/products/events/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_src.evt.gz[events] = 113 counts
[Mon Sep 26 21:21:36 2011] Mean chipx,y = (137.20, 445.34)
[Mon Sep 26 21:21:36 2011] Mean tdetx,y = (4686.66, 3198.20)
[Mon Sep 26 21:21:36 2011] chipx,y range = (115.00-161.00, 423.00-464.00)
[Mon Sep 26 21:21:36 2011] Size of ../../acisf03276/products/events/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 8 counts
[Mon Sep 26 21:21:36 2011] ../../acisf03276/products/images/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_src.img and ../../acisf03276/products/images/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Sep 26 21:21:36 2011] ../../acisf03276/products/spectra/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_src.pi and ../../acisf03276/products/spectra/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Sep 26 21:21:40 2011] ../../acisf03276/products/lightcurves/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_src.lc and ../../acisf03276/products/lightcurves/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Sep 26 21:22:26 2011] Keeping rmf generated by specextract
[Mon Sep 26 21:22:26 2011] 175.365
[Mon Sep 26 21:22:33 2011] Updating aperture counts using extracted products
[Mon Sep 26 21:22:33 2011] Error reading totcts from fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Sep 26 21:22:33 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 21:22:33 2011] Using photon index=1.80, rate=0.00792, arf fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3.arf
[Mon Sep 26 21:22:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 21:22:33 2011] Updating source flux to 1e-13
[Mon Sep 26 21:22:44 2011] Reading fit data from acisf03276/analysis//spectral/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_pl.csv
[Mon Sep 26 21:22:44 2011] Spectral fit parameter nH value = 2.29246e+20
[Mon Sep 26 21:22:44 2011] Spectral fit parameter PhoIndex value = 2.35564
[Mon Sep 26 21:22:44 2011] Failed to get F(0.3-8.0) from acisf03276/analysis//spectral/fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 21:22:44 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 21:22:44 2011] Using Nh = 2.3e+20, photon index=2.36, rate=0.00792, arf fullrun_ccd3_acisf03276_pi14-548_pass1_cl_src3.arf
[Mon Sep 26 21:22:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 21:22:44 2011] Updating source flux to 9.9e-14