[Sat Oct 29 02:57:55 2011] Detection parameters:
  Position = (785.8, 1053.6) = 11 15 39.39 1 32 6.7
  Extent = 0.7" x 0.5", rotation angle = 120 degrees
  Source counts = 72.2 +/- 8.5
  Background counts = 0.8
  Rate = 0.005 +/- 0.0005

[Sat Oct 29 02:57:56 2011] Off-axis axis estimate = 4.21'
[Sat Oct 29 02:58:38 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 02:58:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 02:58:38 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Sat Oct 29 02:58:38 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.929
[Sat Oct 29 02:58:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.90"
[Sat Oct 29 02:58:39 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 02:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03275_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 02:58:39 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 02:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03275_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 02:58:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03275_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03275_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 02:58:39 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 02:58:39 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 02:58:39 2011] Fit fullrun_ccd3_acisf03275_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 02:58:47 2011] Spatial fit model total counts = 74.879900, observed total counts = 75.000000
[Sat Oct 29 02:58:47 2011] Offset between fit and detection position for source 3 = 0.660106 pixels
[Sat Oct 29 02:58:47 2011] 74.868350 total counts/ 7.399450 bgd. counts: snr = 24.802983
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.660106 pixels
  Position = (786.3, 1054.1) = 11 15 39.39 1 32 6.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 67.5 +/- 8.7
  Background counts = 7.4
  Rate = 0.004 +/- 0.0005
[Sat Oct 29 02:58:47 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 02:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 02:58:47 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 02:58:47 2011] Source does appear to be extended
[Sat Oct 29 02:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 02:59:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 02:59:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 02:59:04 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Oct 29 02:59:04 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.062
[Sat Oct 29 02:59:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Sat Oct 29 02:59:04 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 02:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03275_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 02:59:04 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 02:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03275_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 02:59:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03275_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03275_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 02:59:04 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 02:59:04 2011] fullrun_ccd3_acisf03275_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 02:59:04 2011] Fit fullrun_ccd3_acisf03275_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 02:59:12 2011] Spatial fit model total counts = 74.886400, observed total counts = 75.000000
[Sat Oct 29 02:59:12 2011] Offset between fit and detection position for source 3 = 0.028181 pixels
[Sat Oct 29 02:59:12 2011] 74.720810 total counts/ 7.522710 bgd. counts: snr = 24.500212
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.028181 pixels
  Position = (786.2, 1054.1) = 11 15 39.39 1 32 6.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 67.2 +/- 8.6
  Background counts = 7.5
  Rate = 0.004 +/- 0.0005
[Sat Oct 29 02:59:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 02:59:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 02:59:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 02:59:12 2011] Source does appear to be extended
[Sat Oct 29 02:59:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 03:03:32 2011] Not overwriting source region fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 29 03:03:32 2011] Extracting stamp from image fullrun_ccd3_acisf03275_pi14-548_cl_sm2.00.img.gz, (754, 1022) - (818, 1086)
[Sat Oct 29 03:03:32 2011] Writing fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3.gif
[Sat Oct 29 03:03:33 2011] ../../acisf03275/products/events/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_src.evt and ../../acisf03275/products/events/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 29 03:03:33 2011] Size of ../../acisf03275/products/events/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_src.evt.gz[events] = 72 counts
[Sat Oct 29 03:03:33 2011] Mean chipx,y = (249.08, 802.25)
[Sat Oct 29 03:03:33 2011] Mean tdetx,y = (4329.75, 3310.08)
[Sat Oct 29 03:03:33 2011] chipx,y range = (230.00-267.00, 782.00-821.00)
[Sat Oct 29 03:03:33 2011] Size of ../../acisf03275/products/events/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3 counts
[Sat Oct 29 03:03:33 2011] ../../acisf03275/products/images/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_src.img and ../../acisf03275/products/images/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 29 03:03:33 2011] Not generating rmf since there are only 67 counts
[Sat Oct 29 03:03:33 2011] arf not found, will run specextract
[Sat Oct 29 03:03:35 2011] ../../acisf03275/products/spectra/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_bkg.pi not found
[Sat Oct 29 03:03:35 2011] ../../acisf03275/products/spectra/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3.warf not found
[Sat Oct 29 03:03:35 2011] ../../acisf03275/products/spectra/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3.wrmf not found
[Sat Oct 29 03:03:35 2011] Removal of ../../acisf03275/products/spectra/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3.soff failed
[Sat Oct 29 03:03:35 2011] Failed to rename ../../acisf03275/products/spectra/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_grp.pi to ../../acisf03275/products/spectra/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_src.pi
[Sat Oct 29 03:03:40 2011] ../../acisf03275/products/lightcurves/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_src.lc and ../../acisf03275/products/lightcurves/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 29 03:04:30 2011] No arf file found
[Sat Oct 29 03:04:40 2011] Updating aperture counts using extracted products
[Sat Oct 29 03:04:40 2011] Error reading totcts from fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_src.pi
[Sat Oct 29 03:04:40 2011] No arf file for this source, not re-computing flux
[Sat Oct 29 03:04:45 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 03:04:46 2011] acisf03275/analysis//spectral/fullrun_ccd3_acisf03275_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete