[Thu Oct 27 22:50:16 2011] Detection parameters:
  Position = (585.0, 1033.4) = 15 49 5.14 21 33 19.5
  Extent = 6.6" x 5.4", rotation angle = 55 degrees
  Source counts = 147.0 +/- 15.5
  Background counts = 92.0
  Rate = 0.003 +/- 0.0004

[Thu Oct 27 22:50:16 2011] Off-axis axis estimate = 12.52'
[Thu Oct 27 22:51:18 2011] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 22:51:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 22:51:18 2011] Initial guess for spatial extent in simple fitting = 7.02"
[Thu Oct 27 22:51:18 2011] source mask rpix=14.3, npix_max = 872, mask sum = 870, frac = 0.998
[Thu Oct 27 22:51:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.02"
[Thu Oct 27 22:51:19 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 22:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00326_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 22:51:19 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 22:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00326_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 22:51:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00326_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00326_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 22:51:19 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 22:51:19 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 22:51:19 2011] Fit fullrun_ccd2_acisf00326_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 22:51:27 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 66.551532 pixels away
[Thu Oct 27 22:51:27 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 22:51:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 22:51:27 2011] Assessing source extent using major
[Thu Oct 27 22:51:27 2011] Source does appear to be extended
[Thu Oct 27 22:51:27 2011] Computing asymmetry using major and minor axis, asym = 1.22
[Thu Oct 27 22:51:49 2011] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 22:51:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 22:51:49 2011] Initial guess for spatial extent in simple fitting = 7.02"
[Thu Oct 27 22:51:49 2011] source mask rpix=14.3, npix_max = 872, mask sum = 870, frac = 0.998
[Thu Oct 27 22:51:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.02"
[Thu Oct 27 22:51:49 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 22:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00326_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 22:51:49 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 22:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00326_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 22:51:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00326_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00326_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 22:51:50 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 22:51:50 2011] fullrun_ccd2_acisf00326_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 22:51:50 2011] Fit fullrun_ccd2_acisf00326_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 22:51:57 2011] Spatial fit model total counts = 331.665000, observed total counts = 331.000000
[Thu Oct 27 22:51:57 2011] Offset between fit and detection position for source 1 = 1.361768 pixels
[Thu Oct 27 22:51:57 2011] 332.060000 total counts/ 161.054000 bgd. counts: snr = 13.474901
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.361768 pixels
  Position = (585.1, 1032.1) = 15 49 5.15 21 33 18.6
  Extent = 6.9 (5.9-7.9)", rotation angle = 0
  Source counts = 171.0 +/- 18.2
  Background counts = 161.1
  Rate = 0.004 +/- 0.0004
[Thu Oct 27 22:51:57 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 22:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 22:51:57 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 22:51:57 2011] Source does appear to be extended
[Thu Oct 27 22:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 22:52:19 2011] Not overwriting source region fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 27 22:52:19 2011] Extracting stamp from image fullrun_ccd2_acisf00326_pi14-548_cl_sm2.00.img.gz, (271, 718) - (899, 1346)
[Thu Oct 27 22:52:19 2011] Writing fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1.gif
[Thu Oct 27 22:52:20 2011] ../../acisf00326/products/events/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_src.evt and ../../acisf00326/products/events/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 27 22:52:20 2011] Size of ../../acisf00326/products/events/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_src.evt.gz[events] = 275 counts
[Thu Oct 27 22:52:20 2011] Mean chipx,y = (352.12, 824.91)
[Thu Oct 27 22:52:20 2011] Mean tdetx,y = (3885.91, 3733.88)
[Thu Oct 27 22:52:20 2011] chipx,y range = (286.00-410.00, 767.00-888.00)
[Thu Oct 27 22:52:20 2011] Size of ../../acisf00326/products/events/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1027 counts
[Thu Oct 27 22:52:20 2011] ../../acisf00326/products/images/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_src.img and ../../acisf00326/products/images/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 27 22:52:20 2011] ../../acisf00326/products/spectra/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_src.pi and ../../acisf00326/products/spectra/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 27 22:52:23 2011] ../../acisf00326/products/lightcurves/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_src.lc and ../../acisf00326/products/lightcurves/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 27 22:52:32 2011] Keeping rmf generated by specextract
[Thu Oct 27 22:52:32 2011] 156.034
[Thu Oct 27 22:54:58 2011] Updating aperture counts using extracted products
[Thu Oct 27 22:54:58 2011] Error reading totcts from fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 27 22:54:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 22:54:58 2011] Using photon index=1.80, rate=0.00405, arf fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 22:54:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 22:54:58 2011] Updating source flux to 5e-14
[Thu Oct 27 22:55:05 2011] Reading fit data from acisf00326/analysis//spectral/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 27 22:55:05 2011] Spectral fit parameter nH value = 2.43774e+20
[Thu Oct 27 22:55:05 2011] Spectral fit parameter PhoIndex value = 2.77641
[Thu Oct 27 22:55:05 2011] Failed to get F(0.3-8.0) from acisf00326/analysis//spectral/fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 22:55:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 22:55:05 2011] Using Nh = 2.4e+20, photon index=2.78, rate=0.00405, arf fullrun_ccd2_acisf00326_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 22:55:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 22:55:05 2011] Updating source flux to 4.7e-14