[Fri Oct  7 16:51:04 2011] Detection parameters:
  Position = (330.1, 1011.3) = 3 29 46.96 -2 6 24.8
  Extent = 1.4" x 0.6", rotation angle = 170 degrees
  Source counts = 18.2 +/- 4.4
  Background counts = 0.8
  Rate = 0.002 +/- 0.0004

[Fri Oct  7 16:51:05 2011] Off-axis axis estimate = 6.16'
[Fri Oct  7 16:51:50 2011] Using EEF radius (= 1.71 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:51:50 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Fri Oct  7 16:51:50 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.012
[Fri Oct  7 16:51:50 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.71"
[Fri Oct  7 16:51:50 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct  7 16:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03257_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 16:51:50 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct  7 16:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03257_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 16:51:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03257_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03257_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:51:50 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct  7 16:51:50 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct  7 16:51:50 2011] Fit fullrun_ccd3_acisf03257_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct  7 16:51:55 2011] Spatial fit model total counts = 15.693400, observed total counts = 19.000000
[Fri Oct  7 16:51:55 2011] Offset between fit and detection position for source 9 = 0.971024 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.971024 pixels
  Position = (330.6, 1012.2) = 3 29 46.96 -2 6 24.6
  Extent = 1.2" x 0.7", rotation angle = 178
  Source counts = 15.1 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Oct  7 16:51:55 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:51:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:51:55 2011] Assessing source extent using major
[Fri Oct  7 16:51:55 2011] Source does appear to be extended
[Fri Oct  7 16:51:55 2011] Computing asymmetry using major and minor axis, asym = 1.71
[Fri Oct  7 16:51:55 2011] Source is asymmetric
[Fri Oct  7 16:52:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:52:13 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Oct  7 16:52:13 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Fri Oct  7 16:52:13 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.94"
[Fri Oct  7 16:52:14 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct  7 16:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03257_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 16:52:14 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct  7 16:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03257_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 16:52:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03257_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03257_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:52:14 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct  7 16:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03257_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Oct  7 16:52:14 2011] fullrun_ccd3_acisf03257_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct  7 16:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03257_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Oct  7 16:52:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03257_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03257_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:52:18 2011] Spatial fit model total counts = 15.531500, observed total counts = 17.000000
[Fri Oct  7 16:52:18 2011] Offset between fit and detection position for source 9 = 0.112074 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.112074 pixels
  Position = (330.5, 1012.3) = 3 29 46.97 -2 6 24.5
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 14.8 +/- 3.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Oct  7 16:52:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:52:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:52:18 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:52:18 2011] Source does appear to be extended
[Fri Oct  7 16:52:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 16:52:18 2011] Deleting source due to low Poisson probability 0.9